1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Windshield Fit

Discussion in 'General 4Runner Talk' started by Allys toy, Nov 13, 2017 at 5:15 PM.

  1. Nov 13, 2017 at 5:15 PM
    #1
    Allys toy

    Allys toy [OP] New Member

    Joined:
    Monday
    Member:
    #5030
    Messages:
    1
    Vehicle:
    2007 SR5
    I have a 2007 SR5 purchased used. Recently had to have the windshield replaced. The replacement windshield had to be lowered as much as possible (too much) in the installation and still does not fit down into the cowl. With the "slightest" pressure on the cowl it goes under the windshield and the seal on the cowl top pops off. This did not happen with the old windshield. The installer insists it is the correct windshield and cowl and this is the way they are. I took the vehicle to a toyota dealership and they agreed this did not appear right and they had never seen this issue before. However they said the windshield they had for this vehicle was the same size and they did not know what was wrong. Can anyone offer some help with this issue???? I have been unable to obtain windshield dimensions for an original toyota windshield for this vehicle to see if it is different without having to purchase the windshield. Sorry for the long post. I'm frustrated and looking for answers. Thanks
     
To Top