1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Will Tacoma TRD suspension Work on Runner?

Discussion in '5th Gen 4Runners (2010-2024)' started by OmarSing, Dec 10, 2016.

  1. Dec 10, 2016 at 12:45 PM
    #1
    OmarSing

    OmarSing [OP] New Member

    Joined:
    Nov 25, 2016
    Member:
    #3082
    Messages:
    33
    Gender:
    Male
    First Name:
    Omar
    Central California
    Vehicle:
    2016 4runner SR5
    TRD Grill, TrdWheels,TRD skid plate, Bilstein (5100) series suspension front 2.5” and rear with 1.5" swayaway coil. BFG 275/70r17, Added front and rear lower valances.. work in progress…
    Will the 2016 Tacoma TRD Sport/OffRoad suspension fit on a 2016 Runner sr5? I see a lot of locals selling this full suspension for pretty cheap in my opinion. Also would it do me any goo to purchase the UCA's for my lift? Any advice would be appreciated ✌️ Happy Holidays
     
    Amerxon555666 likes this.
  2. Dec 11, 2016 at 5:25 AM
    #2
    wnelax04sr5

    wnelax04sr5 New Member

    Joined:
    Apr 6, 2014
    Member:
    #12
    Messages:
    2,577
    Gender:
    Male
    First Name:
    Ethan
    CT
    Vehicle:
    2004 SR5 4X4 Galactic Gray
    It most likely will fit, the only thing i would check on is the size of the bushings, thats usually where the differences between the two suspensions is. if all youre doing is swapping tacoma suspension to a 4runner then i wouldnt worry about UCA's, the lift amount won't be large enough to necessitate them, but if youre planning more lift in the future it cant hurt to be prepared
     
  3. Dec 13, 2016 at 10:46 PM
    #3
    OmarSing

    OmarSing [OP] New Member

    Joined:
    Nov 25, 2016
    Member:
    #3082
    Messages:
    33
    Gender:
    Male
    First Name:
    Omar
    Central California
    Vehicle:
    2016 4runner SR5
    TRD Grill, TrdWheels,TRD skid plate, Bilstein (5100) series suspension front 2.5” and rear with 1.5" swayaway coil. BFG 275/70r17, Added front and rear lower valances.. work in progress…
    Awesome! Thanks for the notes sir ✌️
     
  4. Dec 14, 2016 at 9:04 AM
    #4
    Relentless

    Relentless Offroad armor Fabricating beast! Vendor

    Joined:
    Apr 18, 2014
    Member:
    #74
    Messages:
    221
    Gender:
    Male
    First Name:
    Eric
    Sparks NV
    Vehicle:
    05 Limited 4.7 V8, long travel, dual locked
    Lifted on 35s and Relentless Armored, too much to list!
    Front- yes, rear- No.
     
    scottalot likes this.
  5. Dec 14, 2016 at 11:45 AM
    #5
    OmarSing

    OmarSing [OP] New Member

    Joined:
    Nov 25, 2016
    Member:
    #3082
    Messages:
    33
    Gender:
    Male
    First Name:
    Omar
    Central California
    Vehicle:
    2016 4runner SR5
    TRD Grill, TrdWheels,TRD skid plate, Bilstein (5100) series suspension front 2.5” and rear with 1.5" swayaway coil. BFG 275/70r17, Added front and rear lower valances.. work in progress…
    Thanks for the response
     
  6. Dec 15, 2016 at 10:45 AM
    #6
    bahndrvr

    bahndrvr New Member

    Joined:
    Aug 29, 2016
    Member:
    #2570
    Messages:
    110
    Gender:
    Male
    First Name:
    Trevor
    Melbourne, Fl
    Vehicle:
    03 SR5 V8 4Runner
    2003 4Runner SR5 v8 - Temp Front: Top hat spacer 2.5" on Tacoma struts/springs Rear: TJM/King heavy extended Tacoma shocks 315 BFG AT KO2's (35's) Thrush Welded muffler and rear watermelon delete with turned exit K&N drop in, and extra filter delete Strengthened/Welded passenger side front diff mount Front diff drop - due to the top hat spacer and massive droop.... Scion headunit CB Other stuff done, 6th 4Runner:)
    Caveat, rear yes if you press out the rear bushings and replace with different lower bushings... Cost is around 8 bucks to do this and around 20 minutes. I will say the rear shocks are too soft for the 4Runner though as I'm currently running them and will replace them soon.
     
  7. Nov 10, 2018 at 6:25 AM
    #7
    cricket1977

    cricket1977 New Member

    Joined:
    Mar 29, 2018
    Member:
    #5738
    Messages:
    11
    Gender:
    Male
    Vehicle:
    2016 4Runner
    Not to drudge up an old thread, but I am under the impression after a couple of scant thread reads and searches that this would be about a 1" lift in front due to length of the Taco coilover, is this actually correct?
     
  8. Apr 12, 2021 at 7:59 PM
    #8
    Amerxon555666

    Amerxon555666 New Member

    Joined:
    Oct 14, 2020
    Member:
    #17336
    Messages:
    39
    Gender:
    Male
    First Name:
    Paul
    Vehicle:
    Red 2021 4runner TRD off-road
    Stock
    can anyone confirm is this will actually add height to a 5th gen 4runner using Tacoma struts?
     

Products Discussed in

To Top