1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Wheel Bearings & Hubs for Sale *** 4th & 5th Gen ***

Discussion in '5th Gen 4Runner Parts Marketplace (2010-2024)' started by ToyotaHubs, Jun 29, 2018.

  1. Jun 29, 2018 at 12:16 AM
    #1
    ToyotaHubs

    ToyotaHubs [OP] New Member

    Joined:
    Jun 28, 2018
    Member:
    #6370
    Messages:
    5
    Gender:
    Male
    I offer these on the Tacoma sister site, they are interchangeable parts.
    https://www.tacomaworld.com/threads/537080/

    Private Message to order

    Also fits
    LEXUS GX460 2010-Present
    LEXUS GX470 2003-2009
    TOYOTA 4RUNNER 2003-Present
    TOYOTA FJ CRUISER 2007-2014
    TOYOTA TACOMA 2005-Present

    I don't sell singles


    Temporary Shipping charge $20

    Read here

    4x4

    *** NSK Bearings ***
    $325
    IMG_3644.jpg

    2WD
    $415
    Not compatible with aftermarket spindles ie Maxtrac, Total Chaos
    IMG_3645.jpg

    My Process

    I use a custom press plate that removes variation by aligning and only applying pressure at the proper area.
    Custom Press Plate.jpg

    Warranty

    Provided by manufacturer, their conditions apply; I am a press service only.

    Terms of Sale
    Inspect the parts upon delivery for press service satisfaction.
    If any discrepancies are found contact me IMMEDIATELY.
    Do NOT attempt to install if any discrepancy is found.

    No other services or conditions are to be assumed.

    To expedite shipment, I preorder and keep parts on hand for quick shipment.
    Payment reserves next available pair when not in stock.
    Everything included is pictured.



    4x4 Install

    Torque CV axle nuts with a calibrated torque wrench to 173 lb ft

    Loan-A-Tool
    Torque Wrench (173 lb ft).....
    Socket (35mm)..................
    Puller (if difficult to remove)


    A loose assembly shortly after installation means your CV axle nut lost it’s torque.

    If the axle nut loses it's torque, forces acting on the assembly will cause the bearing to lose it's press on the hub.

    This can happen many ways:
    • The nut backs off
    Clean CV stub threads with solvent after inserting through hub, then apply Loctite 241

    • The CV stub isn't seated fully during installation
    Clean CV stub splines of rust/grime and apply anti-seize during installation

    • CV axle turned while torqueing and gave the 'click' feeling falsely
    Engage 4x4 and set parking brake before installation

    CV/Knuckle Seals:
    Not included but recommended
    90316-A0001
    (aftermarket options)
    90304-A0001
    (dealership only)
     
    Last edited: Mar 12, 2022
    scottalot and SlvrSlug like this.
  2. Jun 29, 2018 at 6:14 AM
    #2
    SlvrSlug

    SlvrSlug New Member

    Joined:
    Jun 3, 2018
    Member:
    #6172
    Messages:
    6,572
    Gender:
    Male
    First Name:
    John
    Ramona Ca.
    Vehicle:
    2017 4-Runner SR-5 P. Kings, Built Right uca’s, Durabumps, RSG sliders
    Welcome, good to see you here.
     
    ToyotaHubs[OP] likes this.
  3. Jun 29, 2018 at 7:56 AM
    #3
    ToyotaHubs

    ToyotaHubs [OP] New Member

    Joined:
    Jun 28, 2018
    Member:
    #6370
    Messages:
    5
    Gender:
    Male
    Thank you :D
     
  4. Jul 9, 2018 at 10:49 AM
    #4
    ToyotaHubs

    ToyotaHubs [OP] New Member

    Joined:
    Jun 28, 2018
    Member:
    #6370
    Messages:
    5
    Gender:
    Male
    Last edited: Jul 9, 2018
  5. May 18, 2019 at 11:19 AM
    #5
    ToyotaHubs

    ToyotaHubs [OP] New Member

    Joined:
    Jun 28, 2018
    Member:
    #6370
    Messages:
    5
    Gender:
    Male
    Updated, lower price.
     
    scottalot likes this.
  6. Mar 12, 2022 at 6:41 AM
    #6
    ToyotaHubs

    ToyotaHubs [OP] New Member

    Joined:
    Jun 28, 2018
    Member:
    #6370
    Messages:
    5
    Gender:
    Male
    I want to thank everyone that's reached out to me on TW, I appreciate your support!
     
  7. Mar 13, 2022 at 5:33 PM
    #7
    RFB

    RFB New Member

    Joined:
    Feb 2, 2022
    Member:
    #25469
    Messages:
    178
    Gender:
    Male
    First Name:
    Jailbreak
    Vehicle:
    2019 trd pro
    metaltech slider, front bumper 4 in lift UCA/LCA panhard
    you still have these avail? Im doing LCA new Lotus axles this week and would need these ASAP Ill pay the ride obviously. 2019 4runner 4x4 these are going on NEW OEM splindles that have TC reinforcement welded to them if that matters
     
  8. Mar 14, 2022 at 6:29 PM
    #8
    RFB

    RFB New Member

    Joined:
    Feb 2, 2022
    Member:
    #25469
    Messages:
    178
    Gender:
    Male
    First Name:
    Jailbreak
    Vehicle:
    2019 trd pro
    metaltech slider, front bumper 4 in lift UCA/LCA panhard
    NVM already got them from YOTA
     

Products Discussed in

To Top