1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Victory 4x4 New Product Prototyping

Discussion in '5th Gen 4Runners (2010+)' started by victoryrunner, Mar 6, 2019.

  1. Jun 11, 2019 at 8:17 AM
    #61
    victoryrunner

    victoryrunner [OP] New Member

    Joined:
    Feb 4, 2019
    Member:
    #8689
    Messages:
    167
    Gender:
    Male
    First Name:
    Cam
    Vehicle:
    2017 SR5 Magnetic Gray Metallic 4Runner
    Falken Wildpeak A/T3 285/70R17 | Mamba Offroad Wheels M23 | 3" BDS Suspension | Victory 4x4 Blitz Front Winch Bumper | Victory 4x4 Strike Sliders
    Rear bumper prototyping!

    - Wings will be bolt on, allowing for better fit and adjustment.
    - bumper and carriers will be modular!
    - hitch will be built in.
    - bumper will be 7ga steel.

    rearbumper_prototype.jpg
     
  2. Jun 12, 2019 at 4:01 PM
    #62
    danssr5

    danssr5 New Member

    Joined:
    May 29, 2019
    Member:
    #10078
    Messages:
    143
    Gender:
    Male
    First Name:
    Dan
    Vehicle:
    2017 sr5 premium 4x4
    bridgestone revo 3 5100's sitting in the garage ready to be installed
    How do you attach the RTT with such little clearance? I would love to do this but would not want to damage the roof.

    Thanks!
     
  3. Jun 13, 2019 at 11:29 AM
    #63
    victoryrunner

    victoryrunner [OP] New Member

    Joined:
    Feb 4, 2019
    Member:
    #8689
    Messages:
    167
    Gender:
    Male
    First Name:
    Cam
    Vehicle:
    2017 SR5 Magnetic Gray Metallic 4Runner
    Falken Wildpeak A/T3 285/70R17 | Mamba Offroad Wheels M23 | 3" BDS Suspension | Victory 4x4 Blitz Front Winch Bumper | Victory 4x4 Strike Sliders
    With most things you will mount, you can simply lift the notched side of the crossbars to install your hardware. With a RTT that is a little more difficult, so you have two other options. You can use RTT mounting brackets (there are lots of options) that raise the tent up from the crossbars. You can also do what I did quickly before a long trip and remove the factory rails with the crossbars attached, mount that to the tent and then place it back on the roof.
     
  4. Jun 14, 2019 at 8:22 AM
    #64
    danssr5

    danssr5 New Member

    Joined:
    May 29, 2019
    Member:
    #10078
    Messages:
    143
    Gender:
    Male
    First Name:
    Dan
    Vehicle:
    2017 sr5 premium 4x4
    bridgestone revo 3 5100's sitting in the garage ready to be installed
    Thank you that makes perfect sense and helps a ton.
     
  5. Jul 9, 2019 at 11:32 AM
    #65
    victoryrunner

    victoryrunner [OP] New Member

    Joined:
    Feb 4, 2019
    Member:
    #8689
    Messages:
    167
    Gender:
    Male
    First Name:
    Cam
    Vehicle:
    2017 SR5 Magnetic Gray Metallic 4Runner
    Falken Wildpeak A/T3 285/70R17 | Mamba Offroad Wheels M23 | 3" BDS Suspension | Victory 4x4 Blitz Front Winch Bumper | Victory 4x4 Strike Sliders
    Aluminum Blitz Front Bumper prototype! 28lbs. Who would be interested?

    aluminumblitz.jpg
    66457497_338392763764402_563950393038471168_n.jpg
    66275434_2423130704637991_9970264066490368_n.jpg
     
    DrewMan, jgcaps, Firefly21 and 3 others like this.
  6. Jul 9, 2019 at 8:28 PM
    #66
    WallyT4R

    WallyT4R New Member

    Joined:
    Aug 7, 2018
    Member:
    #6644
    Messages:
    1,816
    I would! But would prefer the front light cut out to be without the company logo and completely open.
     
  7. Jul 10, 2019 at 5:58 AM
    #67
    mikeymtbs

    mikeymtbs New Member

    Joined:
    May 26, 2019
    Member:
    #10030
    Messages:
    15
    Gender:
    Male
    First Name:
    Mike
    Vehicle:
    19 TRD ORP
    Looks great. Love the stacked nickels on those welds!! Somebody knows what they’re doing!
     
    KSJ08 and victoryrunner [OP] like this.
  8. Jul 10, 2019 at 7:31 AM
    #68
    victoryrunner

    victoryrunner [OP] New Member

    Joined:
    Feb 4, 2019
    Member:
    #8689
    Messages:
    167
    Gender:
    Male
    First Name:
    Cam
    Vehicle:
    2017 SR5 Magnetic Gray Metallic 4Runner
    Falken Wildpeak A/T3 285/70R17 | Mamba Offroad Wheels M23 | 3" BDS Suspension | Victory 4x4 Blitz Front Winch Bumper | Victory 4x4 Strike Sliders
    They are now live on the site!

    4Runner Front Winch Bumper | Blitz | 5th Gen (14+) - Victory 4x4
    4Runner Front Winch Bumper | Blitz w/Tube | 5th Gen (14+) - Victory 4x4

    The aluminum version with or without tube will be the exact same design as the steel version, the bull bar will look the same. The only difference will be in the material (1/4" aluminum with 1" thick shackle tabs as opposed to the 3/4" tabs on steel).

    The mounting, recovery points, winch plate, and all three faces are tied together allowing for plenty of strength for winching/recovery.

    Use coupon code FIVE for 5% off!
     
    Firefly21 and dtmenace like this.
  9. Jul 10, 2019 at 6:30 PM
    #69
    WallyT4R

    WallyT4R New Member

    Joined:
    Aug 7, 2018
    Member:
    #6644
    Messages:
    1,816
    I guess I could always cut the logo out myself. :computercoffee:
     
  10. Jul 10, 2019 at 6:31 PM
    #70
    Riding Dirty

    Riding Dirty Sinner; saved by grace

    Joined:
    Jul 19, 2017
    Member:
    #4416
    Messages:
    266
    Vehicle:
    2017 T4R Pro 040
    Is plasti-dip a mod?!
    Nice stack o’ dimes!

    I like this bumper, heck I like it all! Can I just send you my runner with a list? Lol
    Will this bumper be winch capable?
     
  11. Jul 11, 2019 at 5:48 AM
    #71
    victoryrunner

    victoryrunner [OP] New Member

    Joined:
    Feb 4, 2019
    Member:
    #8689
    Messages:
    167
    Gender:
    Male
    First Name:
    Cam
    Vehicle:
    2017 SR5 Magnetic Gray Metallic 4Runner
    Falken Wildpeak A/T3 285/70R17 | Mamba Offroad Wheels M23 | 3" BDS Suspension | Victory 4x4 Blitz Front Winch Bumper | Victory 4x4 Strike Sliders
    Sure! Haha
    Yes it is winch capable!
     
    Riding Dirty and DrewMan like this.
  12. Jul 13, 2019 at 3:12 PM
    #72
    john8899

    john8899 New Member

    Joined:
    Jul 13, 2019
    Member:
    #10534
    Messages:
    21
    Gender:
    Male
    Vehicle:
    2019 Trd OR

    About how much space does adding the rtt mounts on the cross bars?
     
  13. Jul 15, 2019 at 5:44 AM
    #73
    victoryrunner

    victoryrunner [OP] New Member

    Joined:
    Feb 4, 2019
    Member:
    #8689
    Messages:
    167
    Gender:
    Male
    First Name:
    Cam
    Vehicle:
    2017 SR5 Magnetic Gray Metallic 4Runner
    Falken Wildpeak A/T3 285/70R17 | Mamba Offroad Wheels M23 | 3" BDS Suspension | Victory 4x4 Blitz Front Winch Bumper | Victory 4x4 Strike Sliders
    You may need to drill to add the RTT mounts, they are designed for the full rack, but they will add about 1" above the rail and the mounting location is moved outside (to the left and right) of the rail, so you have about an inch above the rail, down to the roof.
     
  14. Jul 15, 2019 at 5:46 AM
    #74
    john8899

    john8899 New Member

    Joined:
    Jul 13, 2019
    Member:
    #10534
    Messages:
    21
    Gender:
    Male
    Vehicle:
    2019 Trd OR
    Gotcha! Thanks for the info.
     
  15. Jul 17, 2019 at 7:49 AM
    #75
    john8899

    john8899 New Member

    Joined:
    Jul 13, 2019
    Member:
    #10534
    Messages:
    21
    Gender:
    Male
    Vehicle:
    2019 Trd OR
    There wouldn't happen to be any coupon code out right now for a roof rack would there?
     
  16. Jul 17, 2019 at 7:59 AM
    #76
    victoryrunner

    victoryrunner [OP] New Member

    Joined:
    Feb 4, 2019
    Member:
    #8689
    Messages:
    167
    Gender:
    Male
    First Name:
    Cam
    Vehicle:
    2017 SR5 Magnetic Gray Metallic 4Runner
    Falken Wildpeak A/T3 285/70R17 | Mamba Offroad Wheels M23 | 3" BDS Suspension | Victory 4x4 Blitz Front Winch Bumper | Victory 4x4 Strike Sliders
    You can use coupon code "FIVE" for 5% off your whole order!
     
  17. Jul 17, 2019 at 8:00 AM
    #77
    john8899

    john8899 New Member

    Joined:
    Jul 13, 2019
    Member:
    #10534
    Messages:
    21
    Gender:
    Male
    Vehicle:
    2019 Trd OR
    How much higher off the roof does the rack sit vs the cross bars that you guys make?
     
  18. Jul 17, 2019 at 8:04 AM
    #78
    victoryrunner

    victoryrunner [OP] New Member

    Joined:
    Feb 4, 2019
    Member:
    #8689
    Messages:
    167
    Gender:
    Male
    First Name:
    Cam
    Vehicle:
    2017 SR5 Magnetic Gray Metallic 4Runner
    Falken Wildpeak A/T3 285/70R17 | Mamba Offroad Wheels M23 | 3" BDS Suspension | Victory 4x4 Blitz Front Winch Bumper | Victory 4x4 Strike Sliders
    I'm not sure of the exact difference between the two. The crossbars for the stock rails are almost flush with the top of the stock rails, our roof rack only sits about 2.5" higher than the highest point of the roof.
     
    john8899 likes this.
  19. Jul 17, 2019 at 8:11 AM
    #79
    john8899

    john8899 New Member

    Joined:
    Jul 13, 2019
    Member:
    #10534
    Messages:
    21
    Gender:
    Male
    Vehicle:
    2019 Trd OR
    What is the load rating for the rack and the rails?
     
  20. Jul 17, 2019 at 8:36 AM
    #80
    victoryrunner

    victoryrunner [OP] New Member

    Joined:
    Feb 4, 2019
    Member:
    #8689
    Messages:
    167
    Gender:
    Male
    First Name:
    Cam
    Vehicle:
    2017 SR5 Magnetic Gray Metallic 4Runner
    Falken Wildpeak A/T3 285/70R17 | Mamba Offroad Wheels M23 | 3" BDS Suspension | Victory 4x4 Blitz Front Winch Bumper | Victory 4x4 Strike Sliders
    We don't have an official number, Toyota only seems to have a load rating for the stock rails & crossbars (about 120lbs if I remember correctly). Our crossbars and rack are much stronger. The main thing is to be wise with what you have bouncing around on the roof of the vehicle, especially while wheeling. It's more than sufficient for the gear people usually run, RTT, recovery gear, storage boxes, fuel cans, etc...
     
    4Runner fun likes this.
  21. Jul 17, 2019 at 8:41 AM
    #81
    john8899

    john8899 New Member

    Joined:
    Jul 13, 2019
    Member:
    #10534
    Messages:
    21
    Gender:
    Male
    Vehicle:
    2019 Trd OR
    Thank you!
     
    victoryrunner [OP] likes this.
  22. Jul 18, 2019 at 11:48 AM
    #82
    victoryrunner

    victoryrunner [OP] New Member

    Joined:
    Feb 4, 2019
    Member:
    #8689
    Messages:
    167
    Gender:
    Male
    First Name:
    Cam
    Vehicle:
    2017 SR5 Magnetic Gray Metallic 4Runner
    Falken Wildpeak A/T3 285/70R17 | Mamba Offroad Wheels M23 | 3" BDS Suspension | Victory 4x4 Blitz Front Winch Bumper | Victory 4x4 Strike Sliders
    There has been a lot going on here, but prototyping is continuing!

    rear_1.jpg
     
    DannyD303, john8899, WallyT4R and 4 others like this.
  23. Sep 11, 2019 at 5:18 AM
    #83
    victoryrunner

    victoryrunner [OP] New Member

    Joined:
    Feb 4, 2019
    Member:
    #8689
    Messages:
    167
    Gender:
    Male
    First Name:
    Cam
    Vehicle:
    2017 SR5 Magnetic Gray Metallic 4Runner
    Falken Wildpeak A/T3 285/70R17 | Mamba Offroad Wheels M23 | 3" BDS Suspension | Victory 4x4 Blitz Front Winch Bumper | Victory 4x4 Strike Sliders
    Rear modular swingouts getting close!

    4runner_carrier.jpg
     
  24. Sep 11, 2019 at 11:01 AM
    #84
    tacotundra

    tacotundra New Member

    Joined:
    Oct 20, 2017
    Member:
    #4923
    Messages:
    83
    Gender:
    Male
    First Name:
    James
    That's a good looking rear end :D
     
    victoryrunner [OP] likes this.

Products Discussed in

To Top