1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

TRD Pro wheels on SR5

Discussion in '5th Gen 4Runners (2010+)' started by brandondale, May 12, 2020.

  1. May 12, 2020 at 6:01 AM
    #1
    brandondale

    brandondale [OP] New Member

    Joined:
    May 12, 2020
    Member:
    #14242
    Messages:
    9
    Gender:
    Male
    New here, just got a 17 SR5 premium and looking to get some TRD Pro wheels. I dont need a lift or anything correct? Wont be gettting any huge tires or anything. Really just like the look. I assume I can just get them and even with the stock tires from TRD Pro shouldnt be an issue of even getting some falkens. Saw people talking about rubbing but since they are the same size I would assume not? Offset should be an issue either correct
     
    Last edited: May 12, 2020
  2. May 12, 2020 at 6:16 AM
    #2
    jgcaps

    jgcaps Lovin the Colorado Life.!

    Joined:
    May 30, 2018
    Member:
    #6147
    Messages:
    936
    Gender:
    Male
    First Name:
    John
    CO
    Vehicle:
    2018 MGM TRD ORP KDSS 4Runner
    3" Icon Stage 2, 18x9 Fuel Beast wheels, 285/65/18 BFG KO2's, N-FAB Black Rock Rails w/removable steps.
    Shouldn't be any problem at all.. :thumbsup:
     
  3. May 12, 2020 at 8:50 AM
    #3
    Daytonaviolet

    Daytonaviolet New Member

    Joined:
    Mar 13, 2019
    Member:
    #9167
    Messages:
    557
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    Blizzard Pearl TRD Bro
    No problem unless you lift and or go above 265/70/17 AT tire. These 4mm offset on the TRD wheel should be fine on stock tires.
     
    4Run Like An Antelope likes this.
  4. May 13, 2020 at 5:15 PM
    #4
    Bound2kyle

    Bound2kyle New Member

    Joined:
    May 10, 2020
    Member:
    #14217
    Messages:
    5
    Gender:
    Male
    Just swapped the SR5 wheels on my 2018 SR5 premium to the TRD pro wheels. It was a direct swap. Out the door at the local Toyota dealership for $730 wheels and labor to unmount and remount the tires.
     
    jgcaps likes this.
  5. May 14, 2020 at 5:03 AM
    #5
    brandondale

    brandondale [OP] New Member

    Joined:
    May 12, 2020
    Member:
    #14242
    Messages:
    9
    Gender:
    Male
    Was that with new tires too or did you keep the old tires. Seems a bit low for a dealership damn
     
  6. May 14, 2020 at 5:10 AM
    #6
    Bound2kyle

    Bound2kyle New Member

    Joined:
    May 10, 2020
    Member:
    #14217
    Messages:
    5
    Gender:
    Male
    Kept original tires because they still have at least 20k miles left in them. I think our local dealership needed the service revenue, so they were willing to negotiate on the price of the wheels.
     
  7. May 14, 2020 at 8:23 AM
    #7
    1bad2k

    1bad2k New Member

    Joined:
    Feb 14, 2018
    Member:
    #5490
    Messages:
    39
    Gender:
    Male
    First Name:
    Sam
    Vehicle:
    2000 SR5 4x4 4R
    OEM Trd pro wheels with 265 70 17 ko2 here on my 2018 Sr5. They fit fine, zero rub ON stock suspension, and the now current bilstein TRD pro suspension.

    20200503_143741.jpg
     
  8. May 14, 2020 at 9:10 AM
    #8
    08TXRunner

    08TXRunner New Member

    Joined:
    Feb 17, 2020
    Member:
    #13179
    Messages:
    36
    Gender:
    Male
    Those TRD wheels are put on zillions of 2020's at the port. They fit just fine. Factory tires are 265/70/17's and there's tons of room all around, even at full lock.
     
  9. May 14, 2020 at 9:24 AM
    #9
    rcems2000

    rcems2000 New Member

    Joined:
    Jan 3, 2020
    Member:
    #12558
    Messages:
    19
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    2019 4 Runner SR5
    Black Step Rails
    Looks good. Especially with windows tinted
     
  10. May 14, 2020 at 1:23 PM
    #10
    Daytonaviolet

    Daytonaviolet New Member

    Joined:
    Mar 13, 2019
    Member:
    #9167
    Messages:
    557
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    Blizzard Pearl TRD Bro
    your missing a fang :)
     
    1bad2k and jgcaps like this.
  11. May 14, 2020 at 1:43 PM
    #11
    jgcaps

    jgcaps Lovin the Colorado Life.!

    Joined:
    May 30, 2018
    Member:
    #6147
    Messages:
    936
    Gender:
    Male
    First Name:
    John
    CO
    Vehicle:
    2018 MGM TRD ORP KDSS 4Runner
    3" Icon Stage 2, 18x9 Fuel Beast wheels, 285/65/18 BFG KO2's, N-FAB Black Rock Rails w/removable steps.
    I saw that as well... looks like the fog light housing too..?
     
  12. May 14, 2020 at 5:07 PM
    #12
    1bad2k

    1bad2k New Member

    Joined:
    Feb 14, 2018
    Member:
    #5490
    Messages:
    39
    Gender:
    Male
    First Name:
    Sam
    Vehicle:
    2000 SR5 4x4 4R
    Haha I know. Both actually. I installed the diode dynamics ss3 fog lights and need to find a flat area with a wall so I can adjust them, then tight the set screw and pop those bad boys back on. My wife has made fun of it quite a few times over the last few weeks :D

    20200328_151516.jpg
     
  13. May 15, 2020 at 7:53 AM
    #13
    brandondale

    brandondale [OP] New Member

    Joined:
    May 12, 2020
    Member:
    #14242
    Messages:
    9
    Gender:
    Male

    Yup , Mines white too. Going to get some wheels first, then tint. I have stock running boards but dont know what I want. Ill see what it looks like after. I do like those style ones and the predetor NFAB ones but as long as I have some ill be fine for a while
     
    1bad2k likes this.
  14. May 15, 2020 at 11:30 AM
    #14
    Southbound35

    Southbound35 New Member

    Joined:
    Jan 30, 2020
    Member:
    #12946
    Messages:
    16
    Gender:
    Male
    FWIW, just bought my wife a 2020 SR5P 2WD and immediately swapped out the stock wheels and Bridgestone Duelers for TRD wheels w/ stock size Falken Wildpeaks. They fit perfectly and make the vehicle look great, even on the stock suspension (though a small lift may be in order later). I just sold the stock wheels/tires yesterday for $600, which seems to be the going rate here in TX.
     
  15. May 15, 2020 at 5:52 PM
    #15
    CJT4Runner

    CJT4Runner New Member

    Joined:
    Jan 11, 2020
    Member:
    #12672
    Messages:
    52
    Gender:
    Male
    First Name:
    Chris
    Vehicle:
    ‘20 TRD ORP
    I do like the look of the TRD wheels with chrome lug nuts. Good contrast.
     
  16. May 16, 2020 at 4:14 AM
    #16
    71GS3504sp

    71GS3504sp New Member

    Joined:
    Jul 20, 2019
    Member:
    #10624
    Messages:
    26
    Gender:
    Male
    First Name:
    George
    Vehicle:
    2018 white 4runner
    My SR5 with front Bilstein 5100 lift and rear stock. I just added Pro rim and stock P265 70 17 Hankook Dynapro AT3 tires.

    184Runner-Pro-Wheels 004.jpg
     
    jgcaps, toy33 and mrmike7189 like this.
  17. May 19, 2020 at 6:12 AM
    #17
    brandondale

    brandondale [OP] New Member

    Joined:
    May 12, 2020
    Member:
    #14242
    Messages:
    9
    Gender:
    Male
    Were you able to reuse the TPMS sensors and all that. I assume
     
  18. May 19, 2020 at 6:59 AM
    #18
    Southbound35

    Southbound35 New Member

    Joined:
    Jan 30, 2020
    Member:
    #12946
    Messages:
    16
    Gender:
    Male
    Yep, reused the TPMS sensors
     
    71GS3504sp likes this.

Products Discussed in

To Top