1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

TRD Pro Wheels 2020: 4R Lug Nut Question

Discussion in '5th Gen 4Runners (2010+)' started by travelinscout, May 8, 2020.

  1. May 8, 2020 at 5:29 AM
    #1
    travelinscout

    travelinscout [OP] New Member

    Joined:
    Feb 18, 2020
    Member:
    #13203
    Messages:
    485
    Gender:
    Male
    Arizona
    Vehicle:
    2020 TRD ORP MGM
    I know that this has probably been answered 472 times, but here goes. I will be putting the matte black TRD Pro wheels on my 2020 4R next week, and I want to go with black lug nuts. I have read that they are flat seat, but I have not found much info beyond that.

    Will these fit?:
    https://www.ebay.com/itm/24-OEM-FAC...YOTA-4RUNNER-TACOMA-6X5-5-WHEELS/132158336972

    Are there better ones out there? Does anyone have a link to share?

    Thanks!
     
  2. May 8, 2020 at 5:52 AM
    #2
    karmatp

    karmatp New Member

    Joined:
    Apr 12, 2016
    Member:
    #1856
    Messages:
    228
    Gender:
    Male
    First Name:
    Trevor
    Arizona
    Vehicle:
    2016 SR5 4x4
    TRD wheels, 265/70/17 KO2's, Bilstein 5100's .85
    I have the pro wheels just like everyone else these days and I kept my stock lug nuts. It actually adds a little contrast and looks great. In the past I have done the black wheel, black lug and it was just black. A little contrast goes a long way, I would save your cash.
     
  3. May 8, 2020 at 5:57 AM
    #3
    travelinscout

    travelinscout [OP] New Member

    Joined:
    Feb 18, 2020
    Member:
    #13203
    Messages:
    485
    Gender:
    Male
    Arizona
    Vehicle:
    2020 TRD ORP MGM
    Thank you. I am still trying to decide. I have my whole truck blacked out, and I am not sure about keeping the chrome lug nuts.
     
  4. May 8, 2020 at 12:19 PM
    #4
    Daytonaviolet

    Daytonaviolet TRD Bro

    Joined:
    Mar 13, 2019
    Member:
    #9167
    Messages:
    908
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    Blizzard Pearl TRD Bro
    I’m using the stock chrome ones from my limited wheels. They are a bit long, but they work. I hope to get black lugs some day, but chrome does not look bad.

    B3651346-CDB7-4C0B-BBE7-C065E0005BE2.jpg
     
    Last edited: May 8, 2020
    karmatp likes this.
  5. May 8, 2020 at 7:01 PM
    #5
    mcat707

    mcat707 New Member

    Joined:
    Dec 6, 2019
    Member:
    #12235
    Messages:
    234
    Gender:
    Male
    NOR*CAL - Solano County
    Vehicle:
    2015 TRDPro - Attitude Black Metallic 218
    It’s all subjective. I personally can’t stand anything chrome on modern vehicles (classic cars are fine with chrome) so I tried my best to do a chrome delete on my rig. I personally love the black on black (“murdered out” as some people call it) theme. Some would say it needs contrast, but I think it’s fine just the way it is.

    As for the OP’s question, yes the TRD PRO wheels do require a mag seat type of lug nut and those eBay 12MM x 1.5 should work. 09124414-BBCB-4E66-BAAE-3CD2CB8F9C54.jpg4F70C611-6AC2-49E2-AF8F-4117334DFB9E.jpg

    094F665A-8C8D-44E6-801F-40EFDB33C768.jpg
     
    Last edited: May 8, 2020
  6. May 8, 2020 at 7:59 PM
    #6
    Daytonaviolet

    Daytonaviolet TRD Bro

    Joined:
    Mar 13, 2019
    Member:
    #9167
    Messages:
    908
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    Blizzard Pearl TRD Bro

    All black wheels do look good. I need some black lugs :)
     
    Last edited: May 9, 2020
    travelinscout [OP] likes this.
  7. May 9, 2020 at 4:36 AM
    #7
    2A4R

    2A4R New Member

    Joined:
    Dec 17, 2019
    Member:
    #12363
    Messages:
    221
    Gender:
    Male
    Northern VA
    Vehicle:
    19 4R TRD PRO
    What he said :101010:
     
    travelinscout [OP] likes this.
  8. May 9, 2020 at 11:01 PM
    #8
    GunSlingerMatt

    GunSlingerMatt New Member

    Joined:
    May 9, 2020
    Member:
    #14209
    Messages:
    19
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    2020 Magnetic Gray 4Runner Sr5 Premium 4x4
    Any thoughts on removing the lugs and using some high quality spray paint to get them matte? Anyone try this I was thinking about it. If so what spray paint did you use?
     
  9. May 9, 2020 at 11:35 PM
    #9
    GunSlingerMatt

    GunSlingerMatt New Member

    Joined:
    May 9, 2020
    Member:
    #14209
    Messages:
    19
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    2020 Magnetic Gray 4Runner Sr5 Premium 4x4
    I ordered these just now hopefully they fit anyone know. I’m in the same boat got a 2020 4R and I’m installing the trd pro wheels.

    Here’s the part number
    PT076-60200-02 14D9ACCF-C34D-438F-AFC7-FAEB78739652.jpg
     
  10. May 10, 2020 at 12:07 AM
    #10
    Daytonaviolet

    Daytonaviolet TRD Bro

    Joined:
    Mar 13, 2019
    Member:
    #9167
    Messages:
    908
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    Blizzard Pearl TRD Bro
    i need these too :)

     
    travelinscout [OP] likes this.
  11. May 10, 2020 at 6:59 AM
    #11
    mcat707

    mcat707 New Member

    Joined:
    Dec 6, 2019
    Member:
    #12235
    Messages:
    234
    Gender:
    Male
    NOR*CAL - Solano County
    Vehicle:
    2015 TRDPro - Attitude Black Metallic 218
    The lugs shown in the picture are the acorn type and are not used on the TRD Pro wheels. You will need the mag type lug nuts like the ones pictured in the OP.
     
    Daytonaviolet and GunSlingerMatt like this.
  12. May 10, 2020 at 8:00 AM
    #12
    GunSlingerMatt

    GunSlingerMatt New Member

    Joined:
    May 9, 2020
    Member:
    #14209
    Messages:
    19
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    2020 Magnetic Gray 4Runner Sr5 Premium 4x4
    I knew it was to good to be true I’ll call today and see if I can change the order any chance you got the part number for the correct ones?
     
  13. May 10, 2020 at 10:28 AM
    #13
    Daytonaviolet

    Daytonaviolet TRD Bro

    Joined:
    Mar 13, 2019
    Member:
    #9167
    Messages:
    908
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    Blizzard Pearl TRD Bro
    Which ones do you have ?
     
  14. May 10, 2020 at 10:46 AM
    #14
    mcat707

    mcat707 New Member

    Joined:
    Dec 6, 2019
    Member:
    #12235
    Messages:
    234
    Gender:
    Male
    NOR*CAL - Solano County
    Vehicle:
    2015 TRDPro - Attitude Black Metallic 218

    A while back I was searching for the black OEM lug nuts but couldn’t wait and just went with Gorilla.

    I’ve had them on my Tundra and was pleased with their quality and the black finish held up over time and use so I just went with them again.
     
    GunSlingerMatt and Daytonaviolet like this.
  15. May 10, 2020 at 11:16 AM
    #15
    Daytonaviolet

    Daytonaviolet TRD Bro

    Joined:
    Mar 13, 2019
    Member:
    #9167
    Messages:
    908
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    Blizzard Pearl TRD Bro
  16. May 10, 2020 at 11:21 AM
    #16
    mcat707

    mcat707 New Member

    Joined:
    Dec 6, 2019
    Member:
    #12235
    Messages:
    234
    Gender:
    Male
    NOR*CAL - Solano County
    Vehicle:
    2015 TRDPro - Attitude Black Metallic 218
    Could be that McGeorgeToyota has the right part number but the wrong picture posted?

    I’ve ordered from BAM Wholesale a few times and they are legit and usually have the best prices shipped.

    use coupon code: MINUS20 for 20% off their shipping cost
     
    Daytonaviolet likes this.
  17. May 10, 2020 at 11:26 AM
    #17
    Daytonaviolet

    Daytonaviolet TRD Bro

    Joined:
    Mar 13, 2019
    Member:
    #9167
    Messages:
    908
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    Blizzard Pearl TRD Bro
    perhaps I’ll order a set and report back

    12B5B714-2174-45A3-B63E-E32E3BA960D3.jpg
     
  18. May 10, 2020 at 2:44 PM
    #18
    GunSlingerMatt

    GunSlingerMatt New Member

    Joined:
    May 9, 2020
    Member:
    #14209
    Messages:
    19
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    2020 Magnetic Gray 4Runner Sr5 Premium 4x4
  19. May 11, 2020 at 7:50 PM
    #19
    Daytonaviolet

    Daytonaviolet TRD Bro

    Joined:
    Mar 13, 2019
    Member:
    #9167
    Messages:
    908
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    Blizzard Pearl TRD Bro
    did you cancel your order? if you didn't, please let us know and post pictures. i really want to order these :)
     
  20. May 12, 2020 at 9:47 AM
    #20
    GunSlingerMatt

    GunSlingerMatt New Member

    Joined:
    May 9, 2020
    Member:
    #14209
    Messages:
    19
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    2020 Magnetic Gray 4Runner Sr5 Premium 4x4
    I canceled the order bro and I contacted McGeorge they told me they don’t have any blacked out Lugs that will fit trd pro wheels. I orderEd the eBay ones from up top. I also spoke to my service guy at the dealership he said he can get them but they would be aftermarket and not Toyota parts. Hope this helps.
     
    Daytonaviolet likes this.
  21. May 12, 2020 at 9:49 AM
    #21
    GunSlingerMatt

    GunSlingerMatt New Member

    Joined:
    May 9, 2020
    Member:
    #14209
    Messages:
    19
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    2020 Magnetic Gray 4Runner Sr5 Premium 4x4

    I ordered these I’ll post pics when they get here.
     
    Daytonaviolet likes this.
  22. May 12, 2020 at 10:02 AM
    #22
    Daytonaviolet

    Daytonaviolet TRD Bro

    Joined:
    Mar 13, 2019
    Member:
    #9167
    Messages:
    908
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    Blizzard Pearl TRD Bro
    I ordered these PT076-60200-02 from McGeorge Toyota for $12.32 x 4.

    I’ll post pics when I get them hopefully by Friday :)
     
    GunSlingerMatt likes this.
  23. May 12, 2020 at 6:03 PM
    #23
    celaw309

    celaw309 New Member

    Joined:
    Dec 14, 2019
    Member:
    #12328
    Messages:
    169
    Gender:
    Male
    First Name:
    Chris
    NY
    Vehicle:
    2020 MGM TRD ORP
    After looking at different options and finding the aftermarket options less than desirable (many reviews talking about them fading and rusting quickly etc.) and the OEM lugs expensive I ordered lugcaps from Colorlugs.com for $25.99. They will include a different size for each wheel if you have wheel locks and an "extractor" to pull the caps off for tire changes etc. I've had them on my 4Runner for several months and have had no issues. I've been offroad, through car washes, upstate winter, etc. and they're still there looking good. Something to consider!
     
  24. May 13, 2020 at 4:50 PM
    #24
    08TXRunner

    08TXRunner New Member

    Joined:
    Feb 17, 2020
    Member:
    #13179
    Messages:
    115
    Gender:
    Male
  25. May 13, 2020 at 5:08 PM
    #25
    Daytonaviolet

    Daytonaviolet TRD Bro

    Joined:
    Mar 13, 2019
    Member:
    #9167
    Messages:
    908
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    Blizzard Pearl TRD Bro
  26. May 13, 2020 at 7:20 PM
    #26
    08TXRunner

    08TXRunner New Member

    Joined:
    Feb 17, 2020
    Member:
    #13179
    Messages:
    115
    Gender:
    Male
    Will do tomorrow. What exactly are you looking to see?
     
    Daytonaviolet likes this.
  27. May 14, 2020 at 7:29 AM
    #27
    08TXRunner

    08TXRunner New Member

    Joined:
    Feb 17, 2020
    Member:
    #13179
    Messages:
    115
    Gender:
    Male
    The white marks are light reflections, not problems with the powder coat. I'm impressed so far with the finish.

    [​IMG]

    [​IMG]

    [​IMG]
     
    GunSlingerMatt likes this.
  28. May 14, 2020 at 10:23 AM
    #28
    08TXRunner

    08TXRunner New Member

    Joined:
    Feb 17, 2020
    Member:
    #13179
    Messages:
    115
    Gender:
    Male
    A few measurements and a couple of pics. The black ones are shorter than the OEM silver ones, which is no surprise since Toyota just takes the chrome lugs off the factory base wheels and sticks them on the TRD wheels. Overall length of black is 37mm, with 34mm of thread engagement. OEM is 47mm long overall with 46mm of thread engagement. The wheel stud from flange to tip is 24mm, so there is obviously more than enough room with the new black ones.

    As you can see the black ones are tucked into the wheel rather than sticking out like the OEM ones. I'm going to like this look a whole lot more. I'll post some before/after when I can - it's raining here now.

    [​IMG]

    [​IMG]
     
    2A4R and Daytonaviolet like this.
  29. May 14, 2020 at 10:32 AM
    #29
    mcat707

    mcat707 New Member

    Joined:
    Dec 6, 2019
    Member:
    #12235
    Messages:
    234
    Gender:
    Male
    NOR*CAL - Solano County
    Vehicle:
    2015 TRDPro - Attitude Black Metallic 218

    Some idiot created a discussion thread on this topic. Check it out here..

    https://www.4runners.com/threads/oe...0-trd-pro-black-lug-nuts-and-lock-nuts.11895/
     
  30. May 14, 2020 at 11:25 AM
    #30
    Daytonaviolet

    Daytonaviolet TRD Bro

    Joined:
    Mar 13, 2019
    Member:
    #9167
    Messages:
    908
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    Blizzard Pearl TRD Bro
To Top