1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Tire Suggestions

Discussion in '4th Gen 4Runners (2003-2009)' started by aojaniit1, Aug 4, 2019.

  1. Aug 4, 2019 at 6:49 AM
    #1
    aojaniit1

    aojaniit1 [OP] New Member

    Joined:
    Aug 4, 2019
    Member:
    #10775
    Messages:
    2
    Gender:
    Male
    First Name:
    Adam
    Vehicle:
    2007 Toyota 4runner
    Hey everyone, I have a 2007 toyota 4runner with a 3inch pro comp lift on 285/70/17 nitto all terrains. I am looking for a new setup and definitely want to go wider and need some help. I have been thinking about 33x12.5x20 and have NO idea if they will fit. Any other suggestions?
     
  2. Aug 4, 2019 at 8:40 AM
    #2
    PVT Pablo

    PVT Pablo Ultra Junior Member

    Joined:
    Mar 10, 2016
    Member:
    #1694
    Messages:
    791
    Gender:
    Male
    First Name:
    Paul
    Chesapeake, VA
    Vehicle:
    2016 4Runner TRD Pro
    Those 33's will be super hard to fit being that wide. Most dudes run 285/70/17's which is a 11.2" wide tire. You're trying to run a tire that's over an inch wider. It can be done, but you're really going to have to push those tires far from the control arm which is going to increase scrub radius and center of rotation. Once you push the tires out that far from the suspension you're going to have to cut the living hell out of the fender liners and definitely do a cab mount chop.
     
    aojaniit1 [OP] likes this.
  3. Aug 4, 2019 at 8:44 AM
    #3
    aojaniit1

    aojaniit1 [OP] New Member

    Joined:
    Aug 4, 2019
    Member:
    #10775
    Messages:
    2
    Gender:
    Male
    First Name:
    Adam
    Vehicle:
    2007 Toyota 4runner
    Then I for sure do not want to do that. Not a fan of all that trimming
     
  4. Aug 4, 2019 at 8:46 AM
    #4
    PVT Pablo

    PVT Pablo Ultra Junior Member

    Joined:
    Mar 10, 2016
    Member:
    #1694
    Messages:
    791
    Gender:
    Male
    First Name:
    Paul
    Chesapeake, VA
    Vehicle:
    2016 4Runner TRD Pro
    Ya man 285's are the way to go. They'll look just right on a lifted 4Runner. Having said that, even with the right back spacing and offset wheels, you'll still need to do some light trimming possibly with 285's. On my '16 I had to trim some of the front mudflaps.
     

Products Discussed in

To Top