1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Tekonsha P3 Brake Controller wiring

Discussion in '5th Gen 4Runners (2010+)' started by glandnut, Apr 25, 2017.

  1. Apr 25, 2017 at 10:39 AM
    #1
    glandnut

    glandnut [OP] Reserve Collection Squirrel Hair

    Joined:
    Dec 30, 2016
    Member:
    #3256
    Messages:
    135
    Gender:
    Male
    First Name:
    Jeff
    NE Florida
    Vehicle:
    16' Trail Premium
    Anyone know offhand what plug and play pigtail for the P3 to order for a 5th gen? I have the factory harness they throw in the glove box you have to splice to the controller, but I'd prefer to use the premade harness that plugs into the controller, and then to the left footwell harness. I see the 3040-P harness listed for Toyota, but Amazon tells me it fits 14's, but not for 16's.... Anyone here recently go down this road? No one mentioned this when I searched the threads.
     
  2. Apr 25, 2017 at 11:38 AM
    #2
    jbrandt

    jbrandt New Member

    Joined:
    Apr 20, 2017
    Member:
    #3915
    Messages:
    109
    Gender:
    Male
    Sacramento, CA
    wiring the toyota harness to the controller harness should be super easy. Probably less work (and cheaper) than chasing down the specific harness. The wires are all labeled in the toyota-supplied instructions, so you just match up each of the wires as they are labeled to the controller's harness.

    But it looks like etrailer indicates the 3041-p is what you'll need:

    https://www.etrailer.com/multi-prod...ner&hhyear=2016&vehicleid=201637868&hunter=bc

    But for $15 plus shipping, I would suggest using 4 or 5 $0.03 butt connectors and doing the splice yourself.
     
    Last edited: Apr 25, 2017
  3. Apr 25, 2017 at 2:53 PM
    #3
    glandnut

    glandnut [OP] Reserve Collection Squirrel Hair

    Joined:
    Dec 30, 2016
    Member:
    #3256
    Messages:
    135
    Gender:
    Male
    First Name:
    Jeff
    NE Florida
    Vehicle:
    16' Trail Premium
    Thanks for the suggestion and helping me realize the P3 controller comes with a pigtail to connect my Toyota supplied one. I will create the same exact thing they want to sell me.
     
    jbrandt likes this.

Products Discussed in

To Top