1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Stock blinker position options

Discussion in '3rd Gen 4Runners (1996-2002)' started by thunderrunner, Oct 1, 2016.

  1. Oct 1, 2016 at 7:09 PM
    #1
    thunderrunner

    thunderrunner [OP] New Member

    Joined:
    Jul 18, 2016
    Member:
    #2326
    Messages:
    14
    Gender:
    Male
    First Name:
    Jacob
    Vehicle:
    2002 4runner sr5
    Ok so i recently found out an led switchback can be placed in the stock blinker spot and it will shine white anytime the blinker is not on and when the blinker is on it flashes amber. I was curious if anybody had ever made it to where it shines amber and then flashes amber. Any ideas on how to do this would be appreciated. Thank yall.



    I also noticed that on the tundras the DRLs r amber and they blink amber when the turn signal is turned on. I am curious if i could take the wire from a tundra that does this and put it in my 4runner and have the same function.
     
  2. Oct 2, 2016 at 7:15 AM
    #2
    Bob

    Bob Member Staff Member

    Joined:
    Apr 3, 2014
    Member:
    #1
    Messages:
    2,149
    First Name:
    Bob
    SoCal
    Sub'd for potential interesting inexpensive mod
     

Products Discussed in

To Top