1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Steering vibration

Discussion in '3rd Gen 4Runners (1996-2002)' started by 4runnerhelp, Nov 25, 2018.

  1. Nov 25, 2018 at 5:41 PM
    #1
    4runnerhelp

    4runnerhelp [OP] New Member

    Joined:
    Nov 25, 2018
    Member:
    #7859
    Messages:
    2
    Gender:
    Male
    Vehicle:
    2000 4Runner SR5
    i need help I’ve tried and replace just about all that I can with my 2000 4Runner SR5. I have this vibration on my steering wheel that’s annoying and no one been able to diagnose. When driving at 60 mph I feel a vibration on the driver side, when braking the driver side rotor pulsates. I replace the driver side rotors 4 times, struts, shocks, tranny mount, balances drive shaft, tie rods, driver side caliper and brakes. Does someone else have these issues? HELP!!!
     
  2. Nov 27, 2018 at 5:02 AM
    #2
    Toyotayoda

    Toyotayoda New Member

    Joined:
    May 8, 2017
    Member:
    #4015
    Messages:
    82
    Gender:
    Male
    Atlanta area
    Vehicle:
    1997 SR5 4x4, 302k and counting
    Tacoma whip, 99 console box, tru trac., steering wheel, PWMS and HVAC control out of a 99.
    If you can check the runout of the hub itself.
     
  3. Nov 29, 2018 at 9:12 PM
    #3
    stecow

    stecow New Member

    Joined:
    Aug 19, 2018
    Member:
    #6812
    Messages:
    9
    Gender:
    Male
    First Name:
    Steve
    Vehicle:
    1998 Black 4Runner SR5
    I had a similar thing a little while back. Took it to a shop and they flushed the old brake fluid out and put new stuff in, the pulsating braking went away but not the vibrations. Anyway I don't know if this extra detail will help but the mechanic said I'd need a new brake booster soon. As for the vibration it turns out Ill need a new wheel bearing soon. Best of luck though :thumbsup:
     
  4. Dec 3, 2018 at 10:33 AM
    #4
    shadow247

    shadow247 New Member

    Joined:
    Dec 3, 2018
    Member:
    #7915
    Messages:
    7
    Gender:
    Male
    Vehicle:
    1999 4Runner
    I would say check the hub runout if possible. Sounds like you've eliminated everything else. Can you run the truck in 4wd on a 4 post lift? It makes it really easy to determine if the braking issue is related to the truck being under load or not.
     
  5. Dec 3, 2018 at 10:53 AM
    #5
    stecow

    stecow New Member

    Joined:
    Aug 19, 2018
    Member:
    #6812
    Messages:
    9
    Gender:
    Male
    First Name:
    Steve
    Vehicle:
    1998 Black 4Runner SR5
    Let us know when you figure it out! I'm curious
     

Products Discussed in

To Top