1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

SCS Ray 10 -38 mm offset Fitment question

Discussion in '5th Gen 4Runners (2010+)' started by sherwood4runner, Sep 10, 2020.

  1. Sep 10, 2020 at 10:10 AM
    #1
    sherwood4runner

    sherwood4runner [OP] New Member

    Joined:
    May 19, 2020
    Member:
    #14408
    Messages:
    39
    Gender:
    Male
    First Name:
    Nick
    Vehicle:
    2018 4Runner OFP
    Icon Stage 2 w/ SPC UCA, Spidertrax wheel spacer, Magnaflo exhaust, K&N CAI, Xenon Depot Full LED upgrade, Pedal Commander, KA02 285x70x17, ProComp Vertigo Matte Graphite 17x7.5, Full tint, Husky Liner floor and cargo mat, Morimoto XB headlights, Depo taillights, Diode Dynamic SS3 SAE Fog Lights
    I have a set of Ray 10 on my 5th gen 4runner with -10mm offset and a set of Spidertrax 1.25” spacers. I also have an IVD stage 2 with SPC UCA. I am considering going to a -38mm offset but am curious if I would need to remove the spacers? I currently have no rubbing issues. I am running 285/70/17 Ridge Grapplers.
     
  2. Sep 10, 2020 at 10:29 AM
    #2
    Mtbpsych

    Mtbpsych New Member

    Joined:
    Dec 3, 2018
    Member:
    #7922
    Messages:
    452
    Gender:
    Male
    First Name:
    John
    Vehicle:
    2018 SR5
    Unless you want some nasty rubbing and a super wide stance, ditch the spacers. -38mm is plenty, it brings out the tires outside the fender well. I imagine -38mm combined with a spacer would be horrible for your wheel bearing on the trails. If you haven’t had a BMC done yet, you probably will have to when you go to the -38mm wheel. I have a pretty big BMC and I still occasionally rub on the body mount, but I also have 295’s.
     
  3. Sep 13, 2020 at 2:57 PM
    #3
    Camps

    Camps New Member

    Joined:
    Dec 6, 2017
    Member:
    #5128
    Messages:
    4
    Gender:
    Male
    Vehicle:
    2017 TRD OR
    I have the -38 on mine, but running 275s, along with the Stage 1. I had to get a BMC because of the rubbing. Agree with not needing the spacers. They’re plenty wide.
     
  4. Sep 22, 2020 at 10:30 AM
    #4
    sherwood4runner

    sherwood4runner [OP] New Member

    Joined:
    May 19, 2020
    Member:
    #14408
    Messages:
    39
    Gender:
    Male
    First Name:
    Nick
    Vehicle:
    2018 4Runner OFP
    Icon Stage 2 w/ SPC UCA, Spidertrax wheel spacer, Magnaflo exhaust, K&N CAI, Xenon Depot Full LED upgrade, Pedal Commander, KA02 285x70x17, ProComp Vertigo Matte Graphite 17x7.5, Full tint, Husky Liner floor and cargo mat, Morimoto XB headlights, Depo taillights, Diode Dynamic SS3 SAE Fog Lights
    I ended up just keeping my -10MM with the spacers. I tried to order -38mm offset when they had the matte dark bronze available but the system screwed up and ordered -10mm instead. When they tried to fix it they were out of stock on the -38mm. I appreciate the input.
     
    Mtbpsych likes this.

Products Discussed in

To Top