1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

SAS with 79 cherokee axles?

Discussion in '2nd Gen 4Runners (1990-1995)' started by Bigbird189, Mar 21, 2018.

  1. Mar 21, 2018 at 7:51 AM
    #1
    Bigbird189

    Bigbird189 [OP] New Member

    Joined:
    Mar 21, 2018
    Member:
    #5696
    Messages:
    3
    Gender:
    Male
    Vehicle:
    1995 4runner
    Stock
    I have 1995 4runner i picked up for 200 and want to use off road only and want to do a sas but i have 79 jeep cherokee thats a parts jeep and was wondering if i could do a sas with it or if anybody has used 79 cherokee axles before, i know anything be done with a welder and cutting torch, the front axle are passenger side pumpkin.
     
  2. Mar 21, 2018 at 8:27 AM
    #2
    Bigbird189

    Bigbird189 [OP] New Member

    Joined:
    Mar 21, 2018
    Member:
    #5696
    Messages:
    3
    Gender:
    Male
    Vehicle:
    1995 4runner
    Stock
  3. Mar 21, 2018 at 10:08 AM
    #3
    alittleoff

    alittleoff New Member

    Joined:
    Apr 15, 2016
    Member:
    #1882
    Messages:
    1,106
    Gender:
    Male
    First Name:
    Steve
    406
    Vehicle:
    '16 TP
    I would say yes. A major factor would be the budget. Home fab is only the time it will take. It's kind of a step by step project. A short list to consider is, Jeep leaf springs or 3, 4, link suspension, do the driveshafts on the transfer cases turn in the same rotation, steering linkage, brakes, blah blah blah. YouTube similar projects to get an idea of what is involved.

    Steve
     
    Last edited: Mar 21, 2018
  4. Mar 21, 2018 at 10:25 AM
    #4
    Bigbird189

    Bigbird189 [OP] New Member

    Joined:
    Mar 21, 2018
    Member:
    #5696
    Messages:
    3
    Gender:
    Male
    Vehicle:
    1995 4runner
    Stock
    It will be leafs and I will continue to look on YouTube, time I have, like every body else on a budget but I can fab, and this will not be on road use so some redneck enginutity is ok, plans are lockers, at least 35s, I am currently rebuilding the motor, and maybe 4 inch, want to keep it low for low center of gravity, cut out fenders, rock sliders which I building, tube bumpers with winch, roof rack, and wheel the crap out of it.
     
    alittleoff likes this.
  5. Mar 21, 2018 at 10:39 AM
    #5
    alittleoff

    alittleoff New Member

    Joined:
    Apr 15, 2016
    Member:
    #1882
    Messages:
    1,106
    Gender:
    Male
    First Name:
    Steve
    406
    Vehicle:
    '16 TP
    That's all good shit man and especially wheel the crap out of it.

    Steve
     
    Bigbird189 [OP] likes this.

Products Discussed in

To Top