1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Rubbing

Discussion in '5th Gen 4Runners (2010-2024)' started by o_unit, Aug 17, 2017.

  1. Aug 17, 2017 at 5:07 PM
    #1
    o_unit

    o_unit [OP] New Member

    Joined:
    Aug 17, 2017
    Member:
    #4590
    Messages:
    3
    Gender:
    Male
    Vehicle:
    2015 Magnetic Grey 4runner SR5
    2.5 in Daystar Lift 1.25 Spidertrax
    Can an alignment fix rubbing on the front fender?

    I installed 1.25 spidertrax and seem to have some rubbing inside the front fender at lock turned to the right. Im still running stock tires 265 70 17 and baffled. And i also have a 2.5 in daystar lift... i thought the lift would eliminate any rubbing.
     
  2. Aug 17, 2017 at 5:39 PM
    #2
    PVT Pablo

    PVT Pablo

    Joined:
    Mar 10, 2016
    Member:
    #1694
    Messages:
    2,241
    First Name:
    Paul
    Kitsap County, WA
    Vehicle:
    2016 4Runner TRD Pro
    Yes, but in order to move the tire/wheel assembly rearward you'll lose caster which will make bumpsteer and wandering increase.

    Have you looked at the fender liner mod?
     
  3. Aug 17, 2017 at 5:48 PM
    #3
    o_unit

    o_unit [OP] New Member

    Joined:
    Aug 17, 2017
    Member:
    #4590
    Messages:
    3
    Gender:
    Male
    Vehicle:
    2015 Magnetic Grey 4runner SR5
    2.5 in Daystar Lift 1.25 Spidertrax
    Ahh i see. Yes i thought about doing a fender mod, im just not too thrilled about doing it. But what must be done, must be done. Thanks.
     

Products Discussed in

To Top