Rear windshield wiper not tucking in all the way

Anyone encountered this before?? First picture is how it looks now and second is how it supposed to look. It has some play in it and wiper won’t stow away all the way under the wing. Wiper works perfectly fine. But just a pet peeves of mine when something doesn’t look right..

 

id check where it mounts. there shouldnt be any play in it

 

Does the rear window still go down?
From the factory it is not meant to go down with the wipers in "action". If it does go down it has to be the mounting as mentioned above.
Please, let us know what you find.
Good luck,
Ryan

 

It goes down. I tried to adjust from the 10mm nut but that didn’t to anything.
Which mount are you guys talking about? The one from the wiper or the one attached to the car?

also, when it’s all the way up, I can shake it and it’s loose. Could it be the motor??

 

If it’s under warranty, I’d take it in to the dealer.

 

I have the same issue, no idea if its the whole assembly or just the mounting.

 

I experienced the same. There is a nut/bolt (I can't remember exactly) at the left side of the wiper. If you loosen it with a wrench, push up the wiper blade to appropriate location, then re-tighten, it should fix the sag. Hope that helps!