1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Rear Bumper Tire Carrier?

Discussion in '4th Gen Builds (2003-2009)' started by Ranger Danger, Jul 29, 2018.

  1. Jul 29, 2018 at 6:02 PM
    #1
    Ranger Danger

    Ranger Danger [OP] New Member

    Joined:
    Jul 29, 2018
    Member:
    #6561
    Messages:
    6
    Gender:
    Male
    First Name:
    Lee
    Vehicle:
    Lifted 2004 4Runner
    6" lift, Rear Locker, Tires and Wheels So Far!
    I am the proud owner of a 2004 4Runner. I am looking to carry my spare tire on a rear Bumper/Rack. I have been searching and only found 3. One made by CBI, One made by Mobtown and a couple made by Wilco. Is there any others I have missed? I would have thought there would be a larger selection.

    My ride is running a 6" Custom Fabbed lift with 35" tires.

    00T0T_6sNGJudeCsO_1200x900.jpg
     
    SlvrSlug likes this.
  2. Aug 23, 2018 at 4:44 PM
    #2
    SlvrSlug

    SlvrSlug Slightly bent.

    Joined:
    Jun 3, 2018
    Member:
    #6172
    Messages:
    7,542
    Gender:
    Male
    First Name:
    John
    Ramona Ca.
    Vehicle:
    2017 4-Runner SR-5 P. Kings, Built Right uca’s, Durabumps, RSG sliders
    your ride looks badass.
     
  3. Dec 16, 2019 at 9:54 AM
    #3
    HDHP

    HDHP New Member

    Joined:
    Nov 1, 2019
    Member:
    #11844
    Messages:
    15
    Gender:
    Male
    First Name:
    Steve
    Michigan
    Vehicle:
    05 V8 Sport
    * FJ Cruiser Suspension swap from a 2011 FJ TRD Bilstein's & springs and I put 1.5” Spacers in front. * Front end alignment * Driver side CV Axle * New sway bar Links in front * New Rotors, Calipers and Ceramic Pads * All fluids changed Rear Diff, Front Diff, T-Case, Engine Oil & Antifreeze * Timing belt, Water pump and all related components (at 187,525 miles) * And a Big Shout out to Jeff @slyfox75 for his SAIP eliminate kit * 1.250” wheel spacers (Waiting for Lug Nuts) * Falken Wildpeake AT3 265/70R17 Tires * LED Interior lights * License Plate LED lights * TPMS Disable * Paint Grill, Hood Scoop, underhood valance, and rear valance * Lights in heater controls
    I am going to build my own. Kinda like a Wilco and a Detours and my own design, all put together!

    HDHP
     

Products Discussed in

To Top