1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Overdrive button on shifter handle -98 and 99 different?

Discussion in '3rd Gen 4Runners (1996-2002)' started by Studebaker, Sep 13, 2018.

  1. Sep 13, 2018 at 9:46 AM
    #1
    Studebaker

    Studebaker [OP] New Member

    Joined:
    Sep 13, 2018
    Member:
    #7107
    Messages:
    19
    Gender:
    Male
    Wellborn, Fla
    My 98 pushes in and holds until pushed again.
    I can only get the 99 to push in and pop back out, no holding in place. It is out of car while I do the shifter bushings. Just bought it.
    Just wondering if there is a difference in function/action between the two years

    98 SR5 2wd
    99 Limited 2wd
     
  2. Sep 15, 2018 at 7:49 AM
    #2
    Studebaker

    Studebaker [OP] New Member

    Joined:
    Sep 13, 2018
    Member:
    #7107
    Messages:
    19
    Gender:
    Male
    Wellborn, Fla
    Just an update, took the button apart and found two hair size springs internally. Took me a while but I was finally able to get their position right and put the button assembly back together. Works fine now!
     

Products Discussed in

To Top