1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Noise in my rear end...

Discussion in '4th Gen 4Runners (2003-2009)' started by Caltech90, Mar 21, 2018.

  1. Mar 21, 2018 at 1:02 AM
    #1
    Caltech90

    Caltech90 [OP] New Member

    Joined:
    Aug 24, 2017
    Member:
    #4637
    Messages:
    127
    Gender:
    Male
    Vehicle:
    '19 TRD OR
    What's the best way to replace the bushings in a stock panhard bar? My 4runner has developed a clunk in the rear end when the axle has a side load and the bushings on the panhard bar look worn out. I couldn't duplicate the noise 'cause flex, bet'. I need another jack to be able to lift it by the frame on both sides.
     
  2. Mar 21, 2018 at 1:12 AM
    #2
    Caltech90

    Caltech90 [OP] New Member

    Joined:
    Aug 24, 2017
    Member:
    #4637
    Messages:
    127
    Gender:
    Male
    Vehicle:
    '19 TRD OR
    upload_2018-3-21_4-10-57.jpg
    I think this is the right bushing from Autozone.
     

Products Discussed in

To Top