1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

new project

Discussion in '2nd Gen 4Runners (1990-1995)' started by Shane696, Apr 1, 2016.

  1. Apr 1, 2016 at 7:38 AM
    #1
    Shane696

    Shane696 [OP] New Member

    Joined:
    Mar 31, 2016
    Member:
    #1796
    Messages:
    4
    Gender:
    Male
    Vehicle:
    1994 4runner
    94 v6, has valve clatter and pushing 300k. Can I slap a 22r carb motor in? Probably different mounts right? Or is this crazy talk?
    Will a 93 pick up front fender fit?
    Not sure which models trannys but both 5speed manuals. His is 2wd, mine is 4wd. I might just need a shift fork, has 1,2,R no 3-5, would at least the fork fit if not the tranny itself?
     
  2. Apr 1, 2016 at 4:59 PM
    #2
    wnelax04sr5

    wnelax04sr5 New Member

    Joined:
    Apr 6, 2014
    Member:
    #12
    Messages:
    2,580
    Gender:
    Male
    First Name:
    Ethan
    CT
    Vehicle:
    2004 SR5 4X4 Galactic Gray
    definitely different mounts, id look up the trans codes, could be similar mounting
     
  3. Apr 2, 2016 at 10:55 AM
    #3
    Shane696

    Shane696 [OP] New Member

    Joined:
    Mar 31, 2016
    Member:
    #1796
    Messages:
    4
    Gender:
    Male
    Vehicle:
    1994 4runner
    Wasn't the 22re an option for that year? So shouldn't the 22r have the same mounts?
     
    ThatFenwickGuyFromTW likes this.
  4. Apr 2, 2016 at 10:56 AM
    #4
    Shane696

    Shane696 [OP] New Member

    Joined:
    Mar 31, 2016
    Member:
    #1796
    Messages:
    4
    Gender:
    Male
    Vehicle:
    1994 4runner
    Normally I wouldn't want to put a smaller, older engine in, but this is available and doesn't have many miles on rebuild
     
  5. Apr 3, 2016 at 5:06 AM
    #5
    wnelax04sr5

    wnelax04sr5 New Member

    Joined:
    Apr 6, 2014
    Member:
    #12
    Messages:
    2,580
    Gender:
    Male
    First Name:
    Ethan
    CT
    Vehicle:
    2004 SR5 4X4 Galactic Gray
    it was, my mistake. there should be points on the frame for mounts, but i suspect you'd need to get mounts unless they're with the engine
     
  6. Apr 3, 2016 at 7:45 AM
    #6
    ThatFenwickGuyFromTW

    ThatFenwickGuyFromTW Hillbilly

    Joined:
    Nov 26, 2015
    Member:
    #1227
    Messages:
    148
    Gender:
    Male
    First Name:
    Fenwick
    Chesapeake, VA
    Vehicle:
    2 2nd Gen T4R's, 96 Tacoma 5 Lug
    Work in progress!
    Engine should be good to go, as the second gens also came with the 4 cyl.
    That is an interesting question about the fender- I would think that it would fit, but I've never actually thought about it before.
     

Products Discussed in

To Top