1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

motor mounts

Discussion in '1st Gen 4Runners (1984-1989)' started by studebaker1763, Jul 16, 2014.

  1. Jul 16, 2014 at 9:10 PM
    #1
    studebaker1763

    #1
    studebaker1763 [OP] New Member

    Joined:
    Jul 15, 2014
    Member:
    #205
    Messages:
    1
    Gender:
    Male
    First Name:
    diesel
    Vehicle:
    1986 white 4runner
    brush guard. new motor
    So this is my first time replacing a 22re and I have almost everything put together. But iv ran into a problem. The motor mount on the right side dosnt fit up to the block properly. Is there a peice im missing that it bolts up against the block ? Like there is on the left side
     
    studebaker1763, Jul 16, 2014
    #1
  2. Jul 17, 2014 at 3:01 AM
    #2
    ajohnson

    #2
    ajohnson Glamorous

    Joined:
    Apr 26, 2014
    Member:
    #94
    Messages:
    431
    Gender:
    Male
    First Name:
    Andy
    Charlotte, NC
    Vehicle:
    87 4Runner SAS and other stuffs, 07 Tacoma
    Things and stuff and such
    Not sure what your issue is, but the mounts are 2 piece and side specific.

    Edit: on the drivers side, the alternator bracket shares the front motor mount bolts in the block. I think the alternator bracket goes behind the motor mount. Does that help?
     
    Last edited: Jul 17, 2014
    ajohnson, Jul 17, 2014
    #2
Register FREE to Reply!
To Top