1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

JFR Equal Length Y-Pipe for 2nd Gen Tacoma, T4R, & FJ Cruisers

Discussion in '5th Gen 4Runners (2010-2024)' started by elnip, Jan 24, 2019.

  1. Jan 24, 2019 at 8:54 AM
    #1
    elnip

    elnip [OP] New Member

    Joined:
    Jun 20, 2018
    Member:
    #6295
    Messages:
    88
    Gender:
    Male
    First Name:
    Scott
    LC,NM
    Vehicle:
    2016 4runner Trail P
    For you guys who don't know, @Roostfactor over in TW is making equal length y-pipes for the 1GR.
    Linky https://www.tacomaworld.com/threads...pe-for-2nd-gen-tacoma-t4r-fj-cruisers.578228/

    I have the first 5th Gen install and @Lucario Runner has one on his 4th Gen. Tons of info on the first post and if this is something for you, contact him. Quality is first rate and I could not be happier!


    The following are installed showing the clearance at various points.
    [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG]

    There is great clearance at every vital point. The only concern on a 5th Gen T4R is with a flex, cat and resonator, there is not a lot of length back to the muffler so we cut down every piece to save as much length as we could. Roost did an awesome job and put a piece of pipe beneath every connection from the flex to the resonator for structure. I have the Thermo-Tec to place over the tranny and where the wires to come out for the inverter but don't show it here.

    I just love the way is sounds and the throttle response is excellent as well and the overall increase in drivability, especially being NA.
     
    Last edited: Jan 24, 2019
  2. Jan 24, 2019 at 10:41 AM
    #2
    akkording

    akkording New Member

    Joined:
    Sep 27, 2018
    Member:
    #7309
    Messages:
    137
    Gender:
    Male
    HTX
    Vehicle:
    2012 blizzard pearl sr5 4x4, 03 Tacoma sr5 dcsb v6
    what's the cost total with shipping? it looks like very well built
     
  3. Jan 24, 2019 at 10:44 AM
    #3
    elnip

    elnip [OP] New Member

    Joined:
    Jun 20, 2018
    Member:
    #6295
    Messages:
    88
    Gender:
    Male
    First Name:
    Scott
    LC,NM
    Vehicle:
    2016 4runner Trail P
    Click the link, Roostfactor has it all laid out. Shipping is dependent so you will have to PM him for that.
     
  4. Jan 24, 2019 at 11:49 AM
    #4
    blackoutt

    blackoutt New Member

    Joined:
    Jan 15, 2019
    Member:
    #8437
    Messages:
    64
    Gender:
    Male
    Southern IN
    Vehicle:
    2007 4Runner Limited V8
    Adventure Build
    Based on how the driver side pipe crosses over under the transmission pan this would most likely be easily adapted to the 4th gen V8 as well! The only reason other Taco and FJ y pipes don't fit the 4th gen v8's are because of the electronic transfer case solenoid that sits behind the transfer case where most y pipes are routed. Then there's a length difference where the pipe meets up with catback spring bolt setup. Sounds like that'll be replaced for v-band anyway with this setup so a little length adjusting would be easy. Very nice looking pipes!
     
    elnip [OP] likes this.
  5. Jan 24, 2019 at 2:10 PM
    #5
    2016 4Runner SR5

    2016 4Runner SR5 CONTACT ME FOR CORNFED LIFT SPACERS 631-202-8245

    Joined:
    Jan 29, 2017
    Member:
    #3447
    Messages:
    1,262
    Gender:
    Male
    First Name:
    #ChrisCornfed
    North Carolina
    Looks like that loop hangs very low, maybe below that reinforcement?
     
  6. Jan 24, 2019 at 2:30 PM
    #6
    elnip

    elnip [OP] New Member

    Joined:
    Jun 20, 2018
    Member:
    #6295
    Messages:
    88
    Gender:
    Male
    First Name:
    Scott
    LC,NM
    Vehicle:
    2016 4runner Trail P
    Look at pic 3 then pic 6 as far as hanging down. The loop is above everything, it's the angle of the photo. Nothing is close anywhere. We made sure
    before we installed anything.
     
    2016 4Runner SR5 likes this.
  7. Jan 24, 2019 at 3:18 PM
    #7
    2016 4Runner SR5

    2016 4Runner SR5 CONTACT ME FOR CORNFED LIFT SPACERS 631-202-8245

    Joined:
    Jan 29, 2017
    Member:
    #3447
    Messages:
    1,262
    Gender:
    Male
    First Name:
    #ChrisCornfed
    North Carolina
    SO here's the $1000 question. Who has a video of this on a 5th gen so we can hear it?
     
  8. Jan 24, 2019 at 4:02 PM
    #8
    elnip

    elnip [OP] New Member

    Joined:
    Jun 20, 2018
    Member:
    #6295
    Messages:
    88
    Gender:
    Male
    First Name:
    Scott
    LC,NM
    Vehicle:
    2016 4runner Trail P
    I guess that would be me to do since I am the only one with it. I will make a video and post it soon. I also have the URD hi clearance 3" cat back exhaust with a magnaflow as the rest of my setup. It will be quiter with the stock exhaust.
     
    2016 4Runner SR5 likes this.
  9. Jan 24, 2019 at 4:08 PM
    #9
    2016 4Runner SR5

    2016 4Runner SR5 CONTACT ME FOR CORNFED LIFT SPACERS 631-202-8245

    Joined:
    Jan 29, 2017
    Member:
    #3447
    Messages:
    1,262
    Gender:
    Male
    First Name:
    #ChrisCornfed
    North Carolina
    Really all I'm looking to do is replace the restricting and low hanging OEM Y pipe along with the rear cats. I want to keep the stock cat back. I have yet to hear an aftermarket exhaust that actually sounded good besides Borla which sounds decent. V6 is not easy to make sound good, they usually just sound raspy and riceish
     
    elnip [OP] likes this.
  10. Aug 22, 2019 at 3:01 PM
    #10
    Charlievee

    Charlievee New Member

    Joined:
    Dec 20, 2018
    Member:
    #8149
    Messages:
    1,188
    Any updates on this?
     
  11. Aug 27, 2019 at 3:37 PM
    #11
    danssr5

    danssr5 New Member

    Joined:
    May 29, 2019
    Member:
    #10078
    Messages:
    171
    Gender:
    Male
    First Name:
    Dan
    Vehicle:
    2017 sr5 premium 4x4
    bridgestone revo 3 5100's @2.5/1.5. Stock springs & rear daystar 1.5" spacers
    I had a Y-pipe on my 350z

    That shit works!
     
  12. Aug 27, 2019 at 4:31 PM
    #12
    2016Pro

    2016Pro Why all of the Pro hate?

    Joined:
    Nov 11, 2018
    Member:
    #7739
    Messages:
    994
    This is more of a sound mod? I wouldnt imagine it would add much performance?
     

Products Discussed in

To Top