1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Heater problem

Discussion in '3rd Gen 4Runners (1996-2002)' started by larishere, Dec 7, 2017.

  1. Dec 7, 2017 at 11:20 AM
    #1
    larishere

    larishere [OP] New Member

    Joined:
    Dec 7, 2017
    Member:
    #5133
    Messages:
    1
    Gender:
    Male
    First Name:
    Larry
    Vehicle:
    2001 Toyota 4 runner Limited
    New owner of a 2001 4Runner Limited with 242,000 miles. The only way I can get any heat to come into the cab is by manually pushing the lever to the other side of the heater control valve located under the hood near the firewall. The cable connected to the lever is not operating. Where does that cable go to under the dash and what is it connected to. I've also noticed the air is barely warm. I suspect the heater core probably needs to be flushed.
     
  2. Jan 12, 2021 at 12:24 PM
    #2
    eagle_one_limited

    eagle_one_limited New Member

    Joined:
    Aug 26, 2020
    Member:
    #16351
    Messages:
    7
    Gender:
    Male
    First Name:
    Gonzo
    Los Angeles, CA
    Vehicle:
    2002 limited 4runner 2wd
    Did you ever figure out the problem? I have an issue with my heater control valve, it's leaking coolant. I want to replace it but I'm not sure of the correct part number or a good after market part that works
     

Products Discussed in

To Top