1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Gear Shift Knob

Discussion in '5th Gen 4Runners (2010-2024)' started by Tyotor, Sep 16, 2023.

  1. Sep 16, 2023 at 8:26 PM
    #1
    Tyotor

    Tyotor [OP] New Member

    Joined:
    Jan 8, 2023
    Member:
    #30503
    Messages:
    105
    Gender:
    Male
    First Name:
    Don
    Vehicle:
    2016 SR5 Premium
    Anyone replaced their gear shift knob/ handle with an alternate that they really like? Would love to see pics if possible!
     
  2. Sep 16, 2023 at 8:31 PM
    #2
    PVT Pablo

    PVT Pablo

    Joined:
    Mar 10, 2016
    Member:
    #1694
    Messages:
    2,231
    First Name:
    Paul
    Kitsap County, WA
    Vehicle:
    2016 4Runner TRD Pro
    Teton Workshop is pretty rad. The knobs are weightier than OEM.

    https://tetonworkshop.com/collections/4runner

    Only negative is they're pretty cold in the winter. But who really hangs onto an automatic shifter all day anyway. (Inb4 someone says they in fact do drive like that)
     
    rickystl and djwantke like this.
  3. Sep 16, 2023 at 8:42 PM
    #3
    FN2187

    FN2187 Stormtrooper

    Joined:
    Jul 6, 2022
    Member:
    #27707
    Messages:
    1,263
    Earth
    Vehicle:
    2019 TRD ORP w/ KDSS
    Victory 4x4 Blitz front bumper Smittybilt 10k Synthetic Gobi Stealth no-rise RCI sliders Rago panels and shelf, dash mount RCI Alu skids Dobinsons 2.5/1.5 285/70 Cooper Discoverer Rugged Trek SSO Hitch Mounted Swingout Anytime Front/Rear Camera
    I've seen good things about Teton. Agree with temp change on these aluminum replacements.

    I ended up going AJT, even though I've seen the reputation for being assholes. I liked that I could get the red anodized screws, and got them for hvac and radio knobs as well.

    Only complaint is that it's hard to see the 4wd shifter selections, but had that issue with stock. I tried filling with the white touchup paint I have for super white but I'm too impatient to do it right so I took the paint back off. There are some who have it highlighted well but can't remember the company - I don't need to see the engraving to know how to shift between 2wd, 4h, and 4l.
    20230627_151552.jpg
     
    Treggit, rickystl and 4R4L_2023 like this.
  4. Sep 16, 2023 at 9:55 PM
    #4
    Slopemaster

    Slopemaster Slope Survivalist

    Joined:
    Mar 20, 2021
    Member:
    #20442
    Messages:
    2,865
    Gender:
    Male
    Idaho
    Vehicle:
    2018 SR5
    265-70-17 Ridge Grapplers, TRD Pro rims, 3M precut bra, N-Fab nerf/steps
    Mine hasn’t worn out yet.
     
    Ironguy and 2016Pro like this.
  5. Sep 16, 2023 at 9:57 PM
    #5
    whippersnapper02

    whippersnapper02 New Member

    Joined:
    Feb 27, 2019
    Member:
    #8982
    Messages:
    2,079
    Gender:
    Male
    First Name:
    Christian
    Vehicle:
    2019 4Runner TRD Offroad Premium
    Ellis Precision.

    IMG_5755.jpg
     
    DadOperator, rickystl and MeefZah like this.
  6. Sep 16, 2023 at 10:12 PM
    #6
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    5,615
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeaks
    ^^^Those. I did get a set of Teton Workshop also, but returned them as I prefer the Ellis Precision handles.
     
  7. Sep 16, 2023 at 10:21 PM
    #7
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    5,615
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeaks
    Hot in the summer also. True of all billet aluminum, regardless of manufacturer.
     
  8. Sep 16, 2023 at 11:12 PM
    #8
    Slopemaster

    Slopemaster Slope Survivalist

    Joined:
    Mar 20, 2021
    Member:
    #20442
    Messages:
    2,865
    Gender:
    Male
    Idaho
    Vehicle:
    2018 SR5
    265-70-17 Ridge Grapplers, TRD Pro rims, 3M precut bra, N-Fab nerf/steps
    Good point. Order with the internal cooler.
     
    bassist likes this.
  9. Sep 16, 2023 at 11:13 PM
    #9
    Slopemaster

    Slopemaster Slope Survivalist

    Joined:
    Mar 20, 2021
    Member:
    #20442
    Messages:
    2,865
    Gender:
    Male
    Idaho
    Vehicle:
    2018 SR5
    265-70-17 Ridge Grapplers, TRD Pro rims, 3M precut bra, N-Fab nerf/steps
    Those look nice.
     
  10. Sep 19, 2023 at 12:30 PM
    #10
    CRasch505

    CRasch505 New Member

    Joined:
    Apr 10, 2023
    Member:
    #32273
    Messages:
    69
    Gender:
    Male
    First Name:
    Chris
    Vehicle:
    5th Gen 4Runner ORP
    Fifteen52 Analog HD's, Nitto Terragrapplers, 1" spacer lift front, ceramic on all glass.
    If you get the OEM FJ shift knob and a set screw to mount it, it will match the T-Case knob you already have. Looks great too.
     
    waldo98 likes this.
  11. Sep 19, 2023 at 1:01 PM
    #11
    3JOH22A

    3JOH22A Toyota Gigolo

    Joined:
    Dec 31, 2022
    Member:
    #30349
    Messages:
    1,328
    Gender:
    Male
    District 6ix
    Vehicle:
    5G 4Runner, 3G Tacoma on 35"s
    IS-F carbon fiber shift knob P/N PTR51-53080 from the Lexus dealer parts counter:

     
  12. Sep 19, 2023 at 1:17 PM
    #12
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    5,615
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeaks
    That's pretty slick. Does it use a set screw?
     
  13. Sep 19, 2023 at 9:56 PM
    #13
    makritz

    makritz New Member

    Joined:
    Mar 5, 2023
    Member:
    #31590
    Messages:
    15
    Gender:
    Male
    First Name:
    Matthew
  14. Sep 20, 2023 at 3:29 AM
    #14
    MeefZah

    MeefZah ------------

    Joined:
    Nov 1, 2015
    Member:
    #1122
    Messages:
    2,601
    Gender:
    Male
    First Name:
    Mark
    Lexington, Ohio
    Vehicle:
    '24 ORP
    Another Ellis Precision here. I've had them on several 4Rs and one Taco over the years. I don't generally like aftermarket stuff that doesn't "do" something, but these are nice. Joel (business owner) is a good dude, too.

    [​IMG]

    I have previously had the FJ shifter mentioned above and while I loved the appearance of it, it felt so unsubstantial in my hand - a good aluminum knob is nicely weighted and gives your shifting a positive feel.

    [​IMG]
     
  15. Sep 20, 2023 at 4:10 AM
    #15
    Zakgold

    Zakgold New Member

    Joined:
    Jul 24, 2023
    Member:
    #34332
    Messages:
    35
    Gender:
    Male
    First Name:
    Ed
    Vehicle:
    2023 4Runner Off Road Premium
    Teton Workshop Red Shift knobs, Raptor lights, Baja Fog lights , Red Shackles, rear molle panels, black out lettering, blackout exhaust, fold down seat protective panels (rear seats), LED lights, Fog light brackets with Tri-Color lighting, Black front lower valance, TRD black rims, running boards, roof rack cross bars.
    I have these Red ones...ALWAYS get positive comments when newbies enter my ride. I have RED trim throughout my 2023 ORP from the knobs to the cup/tray inlays.

    Screenshot 2023-09-20 070555.png
     
    wingo and 4R4L_2023 like this.
  16. Sep 20, 2023 at 6:54 AM
    #16
    3JOH22A

    3JOH22A Toyota Gigolo

    Joined:
    Dec 31, 2022
    Member:
    #30349
    Messages:
    1,328
    Gender:
    Male
    District 6ix
    Vehicle:
    5G 4Runner, 3G Tacoma on 35"s
    No set screw. Threads on like the OEM knob, because it is a Lexus OEM knob from the 2010s era.
     
  17. Sep 20, 2023 at 6:58 AM
    #17
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    5,615
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeaks
    Gotcha. I tried an oem 4Runner black TRD knob that also just threads on, but was not able to get it tight and in the correct orientation, and ended up returning it to the dealer. That's what I was curious about with the Lexus knob.
     
  18. Sep 20, 2023 at 7:05 AM
    #18
    wingo

    wingo New Member

    Joined:
    Nov 15, 2022
    Member:
    #29635
    Messages:
    193
    Gender:
    Male
    Vehicle:
    2020 Venture
    Use the same ones in my 4runner. Love how they feel and look. Don't mind if it gets cold in the winter.

    shifter.jpg
     
    MeefZah likes this.
  19. Sep 22, 2023 at 9:32 AM
    #19
    rickystl

    rickystl New Member

    Joined:
    Oct 10, 2020
    Member:
    #17250
    Messages:
    755
    Gender:
    Male
    First Name:
    Rick
    St. Louis, MO
    Vehicle:
    2021 TRD/Off-Road Premium
    Yet another one here with Ellis Precision. For me, the shift knobs have a great feel and just the right "heft" in the hand. Also, they have that "would-be" type Factory look. I added a red accent to the trans knob.002 (Medium).jpg
     
    MeefZah likes this.
  20. Sep 22, 2023 at 12:25 PM
    #20
    TRDSD

    TRDSD New Member

    Joined:
    May 6, 2022
    Member:
    #26967
    Messages:
    83
    Gender:
    Male
    Vehicle:
    2019 TRD Off Road Premium
    Other have already posted pics, but I really love my Teton Workshop ones. They're quality/very well made.
     
  21. Sep 22, 2023 at 12:28 PM
    #21
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    2,775
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Teton Workshop - all black has been pretty sick
    Like all metal shift knobs, hot in summer and cold in winter. For summer, many suggest simply covering with small cloth or clothing item. In the winter, suck it up!

    Teton_workshop_black_shift_knob_1031x1545.jpg
     
    MeefZah likes this.
  22. Sep 22, 2023 at 4:52 PM
    #22
    ChristopherAnt

    ChristopherAnt New Member

    Joined:
    Jul 30, 2023
    Member:
    #34489
    Messages:
    21
    Gender:
    Male
    Vehicle:
    2021 White 4Runner SR5
    Love my Teton shifter. Feels like I’m driving a tank.IMG_0256.jpg
     
    djwantke and MeefZah like this.
  23. Sep 22, 2023 at 5:00 PM
    #23
    5thToy

    5thToy New Member

    Joined:
    Nov 13, 2022
    Member:
    #29611
    Messages:
    378
    Gender:
    Male
    Northern Nevada
    Vehicle:
    2019 SR5P
    Another vote for Teton. This is the version I have as well in all black.

    I also have an Ellis sitting in a drawer in the garage.
     
    djwantke likes this.
  24. Sep 22, 2023 at 6:11 PM
    #24
    playdixie

    playdixie Missi'ppi Fella

    Joined:
    Apr 19, 2022
    Member:
    #26734
    Messages:
    403
    Gender:
    Male
    First Name:
    Jason
    Missi'ppi
    Vehicle:
    2021 Toyota 4Runner TRD Off Road Premium
  25. Jan 13, 2024 at 1:25 PM
    #25
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    2,775
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    @5thToy
    @ChristopherAnt
    @wingo
    @Zakgold
    god listened, and the freezing cold shift knob solution has been created from whole cloth

    Screenshot_20240113-131901.png
     
    5thToy[QUOTED] and rickystl like this.
  26. Jan 13, 2024 at 1:32 PM
    #26
    Rob41

    Rob41 Veteran

    Joined:
    Jun 23, 2023
    Member:
    #33566
    Messages:
    887
    Gender:
    Male
    First Name:
    Rob
    Northern Michigan
    Vehicle:
    2023 Supercharged 4Runner TRD
    Magnuson Supercharger, CSF Performance Radiator, Eibach Pro-Truck Series 2R suspension, SCS Ray10 Bronze Wheels, Pedal Monster, TRD Pro Grill, TRD Pro Roof Rack
    +3 for Ellis Precision........supercharged edition :)
    TRD S 3.jpg TRD S 2.jpg
     
    rickystl and djwantke like this.
  27. Jan 13, 2024 at 1:40 PM
    #27
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    2,775
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Magnificent
     
    rickystl likes this.
  28. Jan 13, 2024 at 2:25 PM
    #28
    rickystl

    rickystl New Member

    Joined:
    Oct 10, 2020
    Member:
    #17250
    Messages:
    755
    Gender:
    Male
    First Name:
    Rick
    St. Louis, MO
    Vehicle:
    2021 TRD/Off-Road Premium
    LOL !!!! That's great. Love it.
     
  29. Jan 13, 2024 at 2:29 PM
    #29
    rickystl

    rickystl New Member

    Joined:
    Oct 10, 2020
    Member:
    #17250
    Messages:
    755
    Gender:
    Male
    First Name:
    Rick
    St. Louis, MO
    Vehicle:
    2021 TRD/Off-Road Premium
    I don't care if they are too hot or too cold. I like them.

    But that mini-hoodie is so cute. LOL

    002 (Medium).jpg
     
  30. Jan 13, 2024 at 2:35 PM
    #30
    Yobruhitsme

    Yobruhitsme New Member

    Joined:
    Nov 17, 2023
    Member:
    #36773
    Messages:
    414
    Gender:
    Male
    Denver
    Vehicle:
    2023 ORP
    I find the oem TRD shifter to be a bit too girthy.
    Wouldn’t mind a more compact one that can fit largely in my palm…
     

Products Discussed in

To Top