1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Gatorgrl's Grand Gen2 4Runner makeover

Discussion in '2nd Gen 4Runners (1990-1995)' started by Fourtoad, May 3, 2019.

  1. Nov 15, 2019 at 10:57 AM
    #301
    Fourtoad

    Fourtoad [OP] Gatorgrl's Yotas

    Joined:
    Apr 30, 2019
    Member:
    #9712
    Messages:
    627
    Gender:
    Female
    First Name:
    Gatorgrl
    SWFL
    Vehicle:
    1991 V6 5 speed super clean, Black and grey
    Stock with headers and after market wheels.
    Ok we worked on that peaky leaking sunroof. We had to make a piece since one of our cables is broken and made of unobtanium. He didn't want to permanently disable the sunroof, in the event we come across this cable in the future and can properly fix it. In the interim, this is our fix:
    20191115_134020.jpg
    This was made to expand into position to put pressure on the rear of the sunroof, to hold it up.
    20191115_134614.jpg
    And this is one in position in the rear corner of the sunroof assembly. The other is in the opposite corner.
    Now on to fixing the a/c.....again.
     
    Last edited: Nov 27, 2019
  2. Nov 21, 2019 at 10:00 AM
    #302
    Fourtoad

    Fourtoad [OP] Gatorgrl's Yotas

    Joined:
    Apr 30, 2019
    Member:
    #9712
    Messages:
    627
    Gender:
    Female
    First Name:
    Gatorgrl
    SWFL
    Vehicle:
    1991 V6 5 speed super clean, Black and grey
    Stock with headers and after market wheels.
    Transfer case:
    Does anyone else notice that their transfer case gets hot when
    traveling at highway speeds?
    (when its not cold outside)
     
  3. Nov 21, 2019 at 2:58 PM
    #303
    SR5 Limited

    SR5 Limited New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    12,302
    Vehicle:
    1996 SR5 Limited
    Drove 15 miles. It was warm...
     
  4. Nov 21, 2019 at 3:13 PM
    #304
    SR5 Limited

    SR5 Limited New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    12,302
    Vehicle:
    1996 SR5 Limited
    Top speed was fiftey five though....
     
  5. Nov 21, 2019 at 5:49 PM
    #305
    Dark Knight

    Dark Knight Get off my lawn

    Joined:
    Sep 18, 2016
    Member:
    #2681
    Messages:
    1,096
    Gender:
    Male
    First Name:
    Jeff
    I have always removed the rear drive shaft when towing these older Toyota’s because without doing so, you have high speed movement in the rear of the case but no fluid movement off the oil slinger which is operated from the Tcase input.
     
    Last edited: Nov 21, 2019
  6. Nov 21, 2019 at 6:07 PM
    #306
    Fourtoad

    Fourtoad [OP] Gatorgrl's Yotas

    Joined:
    Apr 30, 2019
    Member:
    #9712
    Messages:
    627
    Gender:
    Female
    First Name:
    Gatorgrl
    SWFL
    Vehicle:
    1991 V6 5 speed super clean, Black and grey
    Stock with headers and after market wheels.
    OK, we drove it at 60mph for 8hrs, so maybe that was a bit much for it?
     
  7. Nov 21, 2019 at 6:12 PM
    #307
    SR5 Limited

    SR5 Limited New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    12,302
    Vehicle:
    1996 SR5 Limited
    I’ld say that’s pretty reliable....
     
    Fourtoad[OP] likes this.
  8. Nov 22, 2019 at 8:21 AM
    #308
    Fourtoad

    Fourtoad [OP] Gatorgrl's Yotas

    Joined:
    Apr 30, 2019
    Member:
    #9712
    Messages:
    627
    Gender:
    Female
    First Name:
    Gatorgrl
    SWFL
    Vehicle:
    1991 V6 5 speed super clean, Black and grey
    Stock with headers and after market wheels.
    OK did some a/c work last night. Yes, more joy was had. :smashpc: Hopefully these pics help someone that might have to do this repair too.

    expantionvalve.jpg

    This is the expansion valve we needed to replace. Now to find it in the car.

    getting expantion valve.jpg
    It's in here, believe it or not.

    condenser.jpg
    There it is!
    old expantion valve.jpg

    Time to remove it and replace it.

    stripped allen bolt.jpg

    Not so fast...this Allen bolt decided to strip for us. UGH!
    Much cursing
    and drastic measures were attempted until ultimately ,we had to drill it out.
    drilling it out.jpg

    Success was had, but we got hungry and called it a night. Going back today to hopefully finish the job.

     
  9. Nov 22, 2019 at 6:33 PM
    #309
    PennSilverTaco

    PennSilverTaco Encyclopedia of useless information...

    Joined:
    Mar 10, 2017
    Member:
    #3676
    Messages:
    9,174
    Gender:
    Male
    First Name:
    Charlie
    Vehicle:
    2010 Zombie Truck
    Please see signature!
  10. Nov 22, 2019 at 6:35 PM
    #310
    PennSilverTaco

    PennSilverTaco Encyclopedia of useless information...

    Joined:
    Mar 10, 2017
    Member:
    #3676
    Messages:
    9,174
    Gender:
    Male
    First Name:
    Charlie
    Vehicle:
    2010 Zombie Truck
    Please see signature!
    Does your T4R still use R-12, or has it been converted to R134a? Pre-1994 Toyotas with the R-12 refrigerant were like walk-in freezers with the A/C on full blast!
     
    Thatbassguy and scottalot like this.
  11. Nov 23, 2019 at 6:44 AM
    #311
    Fourtoad

    Fourtoad [OP] Gatorgrl's Yotas

    Joined:
    Apr 30, 2019
    Member:
    #9712
    Messages:
    627
    Gender:
    Female
    First Name:
    Gatorgrl
    SWFL
    Vehicle:
    1991 V6 5 speed super clean, Black and grey
    Stock with headers and after market wheels.
    It's been converted. Still having issue due to no power going to the compressor. Compressor is new and works if we jump it. No voltage going to it. Searching for all the relays now.

    On another issue, think we found out why our transfer case is getting hot. Forgot we put the new exhaust on it and the crossover happens right under the transfer case..
    Duh! Gonna put heat wrap on it and see if that fixes it.
     
    PennSilverTaco likes this.
  12. Nov 23, 2019 at 7:11 AM
    #312
    Fourtoad

    Fourtoad [OP] Gatorgrl's Yotas

    Joined:
    Apr 30, 2019
    Member:
    #9712
    Messages:
    627
    Gender:
    Female
    First Name:
    Gatorgrl
    SWFL
    Vehicle:
    1991 V6 5 speed super clean, Black and grey
    Stock with headers and after market wheels.
    Found the friggin culprit to the a/c issue. It's the damned a/c switch / button. It's a fuckin relay and it's not working any longer. Off to the junkyard I go!
     
    Thatbassguy and PennSilverTaco like this.
  13. Nov 23, 2019 at 1:09 PM
    #313
    SR5 Limited

    SR5 Limited New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    12,302
    Vehicle:
    1996 SR5 Limited
    Running a little lean?
     
  14. Nov 23, 2019 at 4:39 PM
    #314
    Fourtoad

    Fourtoad [OP] Gatorgrl's Yotas

    Joined:
    Apr 30, 2019
    Member:
    #9712
    Messages:
    627
    Gender:
    Female
    First Name:
    Gatorgrl
    SWFL
    Vehicle:
    1991 V6 5 speed super clean, Black and grey
    Stock with headers and after market wheels.
    Nope...knock on wood. :rolleyes:

    This a/c
    gremlin really kicked our ass. :frustrated: After taking the dash apart and going over every single fuse, relay and switch to the entire a/c system as well as pinning all the connectors, he still couldn't find the culprit. Then, as a last ditch effort,:pray: I had the car running and he took one of the relays out and plugged it back in and SHAZAM! the fuckin compressor kicked on.:woot: No clue why this time it decided to work. We had all those relays and shit out several times over the last 2 days and this time it decided to work. I give up. It's now working. I don't know why.
     
    PennSilverTaco likes this.
  15. Nov 23, 2019 at 4:46 PM
    #315
    Fourtoad

    Fourtoad [OP] Gatorgrl's Yotas

    Joined:
    Apr 30, 2019
    Member:
    #9712
    Messages:
    627
    Gender:
    Female
    First Name:
    Gatorgrl
    SWFL
    Vehicle:
    1991 V6 5 speed super clean, Black and grey
    Stock with headers and after market wheels.
    Here's what we did to the exhaust crossover issue:

    Before:
    crossover before.jpg

    And now:

    crossover now.jpg

    This should help somewhat to keep the heat off the transfer case.

    Also noticed we will need to rebuild out power steering as she is leaking pretty good now. Ugh.
     
    Thatbassguy and POOLGUY like this.
  16. Nov 23, 2019 at 5:03 PM
    #316
    Dark Knight

    Dark Knight Get off my lawn

    Joined:
    Sep 18, 2016
    Member:
    #2681
    Messages:
    1,096
    Gender:
    Male
    First Name:
    Jeff
    What were the headers y’all got? Do you like them? it’s a tight space over there on my truck. Slave cyl/ clutch fork/ fuel line/ ARB air line. I can’t decide if I want to just keep the factory cross-over. Not going for performance, just trying to keep this new engine cooler for the life of the head gasket.
     
  17. Nov 23, 2019 at 7:56 PM
    #317
    PennSilverTaco

    PennSilverTaco Encyclopedia of useless information...

    Joined:
    Mar 10, 2017
    Member:
    #3676
    Messages:
    9,174
    Gender:
    Male
    First Name:
    Charlie
    Vehicle:
    2010 Zombie Truck
    Please see signature!
    @Fourtoad

    You should upgrade the stereo!
     
    Fourtoad[OP] likes this.
  18. Nov 24, 2019 at 7:19 PM
    #318
    Fourtoad

    Fourtoad [OP] Gatorgrl's Yotas

    Joined:
    Apr 30, 2019
    Member:
    #9712
    Messages:
    627
    Gender:
    Female
    First Name:
    Gatorgrl
    SWFL
    Vehicle:
    1991 V6 5 speed super clean, Black and grey
    Stock with headers and after market wheels.
    I tried to find and link you to the headers I got off Amazon, but apparently they don't exist anymore. I got them from Auto Dynasty off Amazon. They are stainless steel headers. So far we are happy with them. Yes, it was a tight fit for us too but we made it and created some heat shield in addition to the wrapping.
     
  19. Nov 25, 2019 at 5:01 AM
    #319
    Dark Knight

    Dark Knight Get off my lawn

    Joined:
    Sep 18, 2016
    Member:
    #2681
    Messages:
    1,096
    Gender:
    Male
    First Name:
    Jeff
    We’re they the $179 set of headers?
     
  20. Nov 25, 2019 at 1:19 PM
    #320
    Fourtoad

    Fourtoad [OP] Gatorgrl's Yotas

    Joined:
    Apr 30, 2019
    Member:
    #9712
    Messages:
    627
    Gender:
    Female
    First Name:
    Gatorgrl
    SWFL
    Vehicle:
    1991 V6 5 speed super clean, Black and grey
    Stock with headers and after market wheels.
    $183.88 if I remember right.
     
  21. Nov 25, 2019 at 2:38 PM
    #321
    Dark Knight

    Dark Knight Get off my lawn

    Joined:
    Sep 18, 2016
    Member:
    #2681
    Messages:
    1,096
    Gender:
    Male
    First Name:
    Jeff
    Ok. Seems the pro tuning labs is the type. All the header kits at that price seem the same. Thanks for the info.
     
  22. Nov 26, 2019 at 4:40 AM
    #322
    PennSilverTaco

    PennSilverTaco Encyclopedia of useless information...

    Joined:
    Mar 10, 2017
    Member:
    #3676
    Messages:
    9,174
    Gender:
    Male
    First Name:
    Charlie
    Vehicle:
    2010 Zombie Truck
    Please see signature!
    @Fourtoad

    Would you ever put a backup camera or a Bluetooth stereo in your T4R?
     
  23. Nov 26, 2019 at 2:44 PM
    #323
    Fourtoad

    Fourtoad [OP] Gatorgrl's Yotas

    Joined:
    Apr 30, 2019
    Member:
    #9712
    Messages:
    627
    Gender:
    Female
    First Name:
    Gatorgrl
    SWFL
    Vehicle:
    1991 V6 5 speed super clean, Black and grey
    Stock with headers and after market wheels.
    Charlie, if I could finally STOP fixing more important things, then I might consider upgrading luxury things such as the radio. Both of my builds are in need of some tunes oddly enough.
     
    PennSilverTaco and Thatbassguy like this.
  24. Nov 26, 2019 at 2:54 PM
    #324
    SR5 Limited

    SR5 Limited New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    12,302
    Vehicle:
    1996 SR5 Limited
    I’ve been listening to cassette tapes of Christmas music.:)
     
  25. Nov 26, 2019 at 7:56 PM
    #325
    PennSilverTaco

    PennSilverTaco Encyclopedia of useless information...

    Joined:
    Mar 10, 2017
    Member:
    #3676
    Messages:
    9,174
    Gender:
    Male
    First Name:
    Charlie
    Vehicle:
    2010 Zombie Truck
    Please see signature!
    I have all my favorite Christmas songs on my iPod!
     
  26. Nov 26, 2019 at 8:31 PM
    #326
    SR5 Limited

    SR5 Limited New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    12,302
    Vehicle:
    1996 SR5 Limited
    Not the same. It even has auto-reverse and I don’t have to flip the tape...
     
  27. Nov 26, 2019 at 8:51 PM
    #327
    PennSilverTaco

    PennSilverTaco Encyclopedia of useless information...

    Joined:
    Mar 10, 2017
    Member:
    #3676
    Messages:
    9,174
    Gender:
    Male
    First Name:
    Charlie
    Vehicle:
    2010 Zombie Truck
    Please see signature!
    I don’t think I ever had Christmas songs on tape; Only on CD...

    I have a playlist of all my favorite Christmas songs and it just plays in a never-ending loop if I allow it to.
     
    SR5 Limited[QUOTED] likes this.
  28. Nov 27, 2019 at 7:17 PM
    #328
    Fourtoad

    Fourtoad [OP] Gatorgrl's Yotas

    Joined:
    Apr 30, 2019
    Member:
    #9712
    Messages:
    627
    Gender:
    Female
    First Name:
    Gatorgrl
    SWFL
    Vehicle:
    1991 V6 5 speed super clean, Black and grey
    Stock with headers and after market wheels.
    Well, today's challenge was to fix a new leak....that damned power steering pump! Bought a reseal kit from o'Reilly's for $15.00 and it took about 1hr to do the job.

    powersteeringpump.jpg

    Now I get to pressure wash the bottom of the engine to get all that power steering fluid off it. It also appears to have a slight coolant leak, but we have to clean it up first to find where that is coming from. :facepalm:
     
  29. Nov 27, 2019 at 7:32 PM
    #329
    SR5 Limited

    SR5 Limited New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    12,302
    Vehicle:
    1996 SR5 Limited
    Did you have to press the seal in or just use a socket type deal?
     
  30. Nov 27, 2019 at 8:26 PM
    #330
    Fourtoad

    Fourtoad [OP] Gatorgrl's Yotas

    Joined:
    Apr 30, 2019
    Member:
    #9712
    Messages:
    627
    Gender:
    Female
    First Name:
    Gatorgrl
    SWFL
    Vehicle:
    1991 V6 5 speed super clean, Black and grey
    Stock with headers and after market wheels.
    He put a little Indian head on it and tapped it into place. Socket type deal.
     
    SR5 Limited likes this.

Products Discussed in

To Top