1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

fuses 98 runner

Discussion in '3rd Gen 4Runners (1996-2002)' started by cam366, May 5, 2021.

  1. May 5, 2021 at 8:56 PM
    #1
    cam366

    cam366 [OP] New Member

    Joined:
    May 5, 2021
    Member:
    #21299
    Messages:
    19
    Gender:
    Male
    First Name:
    david
    Vehicle:
    98 4runner
    Just bought it from a guy,he jumped it with the small noco unit(jumper).Drove it on a trailer,brought it home,tried to jump with battery to get it off the trailer,nothing would happen.We pushed it off in front of my house.Removed the old battery,replaced with a new one.headlights come on but nothing else at all shows sign of power.I strat checking around and the 100 amp fuse under hood that says "alt"is blown.Tried to pull it out,but only the plastic came out,I am guessing either it was not to be pulled out or its welded now in there.Where to go from here?
     
  2. May 6, 2021 at 1:19 PM
    #2
    PhantomTweak

    PhantomTweak New Member

    Joined:
    Dec 20, 2019
    Member:
    #12402
    Messages:
    1,206
    Gender:
    Male
    First Name:
    Patrick
    OREGON
    Vehicle:
    1999 4Runner, bone stock
    None. Bone Stock. EXCEPT: Brushguard, tow hitch, both welded to the frame. It's good to have friends and a fully equipped garage!
    To get out, you need to take the upper part of the fuse box out. Just a couple small bolts, and a catch in the fuse box. The part of the fuse box that has the fusible links in it, the 100, 80, and 40 amp one. The look like fuses, but Toyota calls them fusible links. They screw in from the bottom. There's a wire there from the battery, one from the alternator, etc.
     
  3. Jun 25, 2021 at 3:35 PM
    #3
    cam366

    cam366 [OP] New Member

    Joined:
    May 5, 2021
    Member:
    #21299
    Messages:
    19
    Gender:
    Male
    First Name:
    david
    Vehicle:
    98 4runner
    thanks that did the trick,replaced the 100 fuse(fuseable link)bought at autozone,then two more small 15 fuses inside under dash and all is good,thanks to you ,and for the help great
     
  4. Jun 26, 2021 at 11:53 AM
    #4
    PhantomTweak

    PhantomTweak New Member

    Joined:
    Dec 20, 2019
    Member:
    #12402
    Messages:
    1,206
    Gender:
    Male
    First Name:
    Patrick
    OREGON
    Vehicle:
    1999 4Runner, bone stock
    None. Bone Stock. EXCEPT: Brushguard, tow hitch, both welded to the frame. It's good to have friends and a fully equipped garage!
    Glad you got it running right again.
    Now, take it out and have fun with it :D
    Pat☺
     
  5. Jun 28, 2021 at 7:31 AM
    #5
    negusm

    negusm New Member

    Joined:
    Oct 22, 2019
    Member:
    #11745
    Messages:
    1,899
    Gender:
    Male
    Vehicle:
    2002 4Runner SR5 4WD
    I wonder what caused that stuff to blow.

    I'd be on high alert.

    That Fusible 100Amp link should NEVER blow. To blow that, something went very very wrong. I've heard it blowing only when someone has hooked up a shop battery charger backwards.
     
    PorkRunner99 likes this.

Products Discussed in

To Top