1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Fuel pump power

Discussion in 'New Member Introductions' started by Pitbull67, Jul 27, 2017.

  1. Jul 27, 2017 at 2:20 PM
    #1
    Pitbull67

    Pitbull67 [OP] New Member

    Joined:
    Jul 27, 2017
    Member:
    #4470
    Messages:
    1
    Gender:
    Male
    First Name:
    Phil
    Vehicle:
    2004 4Runner
    None so far
    I recently had to Replace the fuel pump and i know No one else has ever done this but i didn't know i could unplug the wires from under the driver side rear seat. So i ended up pulling the wires out of the plug no big deal fixed that issue but now I'm not getting power to the sending unit and have checked and changed relays and fuses any one else ever had this issue ? If so any help would be appreciated
     
  2. Jul 31, 2017 at 12:33 AM
    #2
    larramo

    larramo 3ed gen faithfully

    Joined:
    Jul 10, 2017
    Member:
    #4363
    Messages:
    107
    Gender:
    Male
    First Name:
    larry
    clearlake ca
    Vehicle:
    4 runner
    3" lift but mostly all stock not a scratch on it it is pristine condition amazing for being 19 years old.
    sound like it time for a volt meter. you need to check all the wires and make sure you got them all right i would get a volt meter and double check the wires or run a positive line to the fuel pump to see if it is working.hope this helps LARRY B.
     

Products Discussed in

To Top