1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Fan Bracket Question

Discussion in '3rd Gen 4Runners (1996-2002)' started by Norm01, May 30, 2018.

  1. May 30, 2018 at 6:05 AM

    Norm01 [OP] New Member

    May 30, 2018
    I have a 97 4 Runner that needs a new fan bracket. This is the first time I'm changing it. What concerns me is the timing belt behind the fan bracket. The fan bracket has three holes for each bolt. I am not to sure by taking the old fan bracket out if its going to alter the timing belt in any way. Also, does anyone know what the torch spec are going to be for these bolts. I tried to look them up in the Chilton book but I could not find it. Also on the front of the fan bracket are four screws that are threat on both ends. Does anyone know the torch spec for this when the pulley is put back on. Thanks.

Products Discussed in

To Top