1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Engine Swap

Discussion in '2nd Gen 4Runners (1990-1995)' started by PickelRick, Jun 3, 2018.

  1. Jun 3, 2018 at 2:08 PM

    PickelRick [OP] New Member

    Oct 22, 2017
    Hi Forum,
    im having a 92 4runner that im putting a 95 3vze in because i have a rodknock.
    i noticed the wire harness isnt exactly the same so i wanted to ask if somebody has expirience with this.
    as far as i know between 93 and 95 they tweeked a thing or two on the 3vze and what i noticed is that the newer wireharness has less wires going to the ecu.

    can somebody answer me this: if i would be to swap the engine, swap the ecu and use the already installed 92 wireharness would i be ok? since the newer one is kind of chewed up and plugs are missing (i got the engine from a junkyard and the really didnt care a lot about that) i would rather use the engine wireharness already in my truck.

    i hope all of this makes sense and it would be great somebody could help me out here.

Products Discussed in

To Top