1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

engine stalling and pulsating while idling

Discussion in '2nd Gen 4Runners (1990-1995)' started by cough, Mar 2, 2017.

  1. Mar 2, 2017 at 9:45 AM
    #1
    cough

    cough [OP] New Member

    Joined:
    Mar 2, 2017
    Member:
    #3627
    Messages:
    2
    Gender:
    Male
    Vehicle:
    1995 toyota 4 runner
    Hi, I've been having issues for about a month with my 95 4 runner cutting out while driving(anywhere from 20mph to 55) , it starts right up again and will drive fine but eventually it would stall out again. I changed my fuel filter, air filter and sprayed out my MAS with appropriate spray but now when I start the engine it runs fine for about 10 -15 secs and then begins a pulsating rev anywhere from 1500 rpm to 1750. A couple times I tried it it would completely cut out,sputter and die after only a few seconds.The last time it ran at a steady 1500rpm for 10 secs and then returned to the pulsating run. Any thoughts?
     
To Top