1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Disassembling IFS differential

Discussion in '3rd Gen 4Runners (1996-2002)' started by victor armando, Oct 6, 2016.

  1. Oct 6, 2016 at 5:38 PM
    #1
    victor armando

    victor armando [OP] New Member

    Joined:
    Oct 6, 2016
    Member:
    #2787
    Messages:
    1
    Gender:
    Male
    First Name:
    victor
    Juarez city, chihuahua
    Vehicle:
    1996 red 4runner
    nothing
    I have a Toyota 4runner 1996 and i noticed that i need to replace all IFS differential bearings and seal due to they got water, so i would appreciate your help and all your experience on this issue and I was wondering if there is a procedure to disassemble the IFS diff.

    thanks in advance


    T7.jpg
    here is one of the problem, the inner joint does not pop off,

    T4.jpg
    second problem; I can't remove the pinion, i don't know the steps.

    T8.jpg
    and the pin that hold the pinion shaft, i can't remove it

    T2.jpg
    T1.jpg
    T5.jpg
     
  2. Oct 8, 2016 at 7:17 AM
    #2
    POOLGUY

    POOLGUY New Member

    Joined:
    Aug 16, 2016
    Member:
    #2481
    Messages:
    232
    Gender:
    Male
    First Name:
    Jeff
    Vehicle:
    '08 4RUNNER
    Sorry I don't know anything about taking the pinion gear apart. Try googling information on the internet or utube. I have had some good luck with finding info on repairs that way. Good luck.
     
To Top