1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Correct front leveling kit!

Discussion in 'Suspension' started by Brian4R1973, Jun 24, 2015.

  1. Jun 24, 2015 at 5:31 PM
    #1
    Brian4R1973

    Brian4R1973 [OP] New Member

    Joined:
    Jun 24, 2015
    Member:
    #724
    Messages:
    2
    Gender:
    Male
    First Name:
    Brian
    Vehicle:
    2010 4Runner SR5
    I have a 2010 SR5 4Runner and put a 3/4 inch front spacer leveling kit on it a few years ago and added 275/60/17 BF Goodrich all terrains and it looks good! Problem is it's still not truly level and I cannot find any info on what size front spacer leveling kit will truly level my ride! I feel as if I need either a 1.5 inch or a two inch! I know there is precisely a two inch difference in the bottom of the fender flares from the top of the tires(3 inches front / 5 inches rear I subtracted my 3/4 from front) but the problem is fender flares are not same height they are off just a smidgen! Any suggestions or anyone who has leveled there 5th generation 4 runner with a base front spacer leveling kit would be greatly appreciated! Thanks!
     
  2. Jun 25, 2015 at 7:34 AM
    #2
    Brian4R1973

    Brian4R1973 [OP] New Member

    Joined:
    Jun 24, 2015
    Member:
    #724
    Messages:
    2
    Gender:
    Male
    First Name:
    Brian
    Vehicle:
    2010 4Runner SR5
     
  3. Nov 8, 2015 at 6:42 PM
    #3
    MeefZah

    MeefZah Curmudgeonly

    Joined:
    Nov 1, 2015
    Member:
    #1122
    Messages:
    591
    Gender:
    Male
    First Name:
    Mark
    Eureka, Calif
    Vehicle:
    '17 4R SR5 4WD x 2!
    Things with stuff, but nothing much
    Man every thread here is old! LOL!! My understanding from research I did was that you need 1.0-1.5" on the 5th Gen to level the front. 2" will put you with a hair rear rake.

    That's why a common leveling lift is 2.5" front and 1.5" rear (1.0" difference to the front).
     
To Top