1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Convert back to stock oem suspension

Discussion in '5th Gen 4Runners (2010-2024)' started by thatchtt2001, Feb 24, 2021.

  1. Mar 10, 2021 at 4:46 PM
    #31
    thatchtt2001

    thatchtt2001 [OP] New Member

    Joined:
    Feb 24, 2021
    Member:
    #19961
    Messages:
    50
    Gender:
    Male
    First Name:
    TTT
    Northwest Ohio
    Vehicle:
    2016 Trail
    Eibach Stage 1 Shocks with OEM Springs.
    I've noticed since we just had our first days above 50 degrees it smoothed out a lot... I am still planning to go back to stock springs on the eibach shocks but just wanted to mention that. When it was in the teens it was brutal. After riding around for an hour I couldn't wait to get out of it.. Most people could tolerate it but my lower back was asking me what the hell I am doing lol...
     
  2. Mar 10, 2021 at 10:09 PM
    #32
    Fortuner

    Fortuner New Member

    Joined:
    Jan 12, 2021
    Member:
    #19082
    Messages:
    157
    CA
    Vehicle:
    2021 4Runner TRD Off Road Premium w/KDSS
    Very interesting. I’m from Los Angeles, it rarely gets below 50°, lol.

    Are you planning to have the perch’s set at 0” - essentially stock height, when you switch back to the OEM springs? Would love to hear how the ride quality changes.
     
  3. Mar 11, 2021 at 3:54 AM
    #33
    thatchtt2001

    thatchtt2001 [OP] New Member

    Joined:
    Feb 24, 2021
    Member:
    #19961
    Messages:
    50
    Gender:
    Male
    First Name:
    TTT
    Northwest Ohio
    Vehicle:
    2016 Trail
    Eibach Stage 1 Shocks with OEM Springs.
    When I put the rear oem shocks on, it will lower an inch so when I do the front I'll put the perch on the third ring (1.6 in) and that will lower the front 1 inch from 2.75 roughly. I'll let you know it's going to be after Easter then I'll send an update...
     
    Fortuner[QUOTED] likes this.
  4. Mar 11, 2021 at 4:13 AM
    #34
    thatchtt2001

    thatchtt2001 [OP] New Member

    Joined:
    Feb 24, 2021
    Member:
    #19961
    Messages:
    50
    Gender:
    Male
    First Name:
    TTT
    Northwest Ohio
    Vehicle:
    2016 Trail
    Eibach Stage 1 Shocks with OEM Springs.
    From what I have learned if you have the Eibach shocks and I box springs you would want to be on the bottom perch to be at a 2.75-in lift in the front if you are up higher your preloading the spring and that would explain the extreme stiffness
     
    DRobs likes this.
  5. Mar 11, 2021 at 5:58 AM
    #35
    Fortuner

    Fortuner New Member

    Joined:
    Jan 12, 2021
    Member:
    #19082
    Messages:
    157
    CA
    Vehicle:
    2021 4Runner TRD Off Road Premium w/KDSS
    thats exactly where I’m at, with a ¾” cornfed spacer on the rear. I’ll post some updated pics soon.
     
  6. Mar 11, 2021 at 5:59 AM
    #36
    Fortuner

    Fortuner New Member

    Joined:
    Jan 12, 2021
    Member:
    #19082
    Messages:
    157
    CA
    Vehicle:
    2021 4Runner TRD Off Road Premium w/KDSS
    You’re correct, however I’m only on the Eibach shocks, my springs all the way around are OEM springs that came on the car. So my perch adjustment only bet me 1.6” (technically I got a bit closer to 1.75” on the fronts)
     
  7. Mar 11, 2021 at 9:30 AM
    #37
    koukimonster

    koukimonster DYNO4

    Joined:
    Aug 4, 2020
    Member:
    #15907
    Messages:
    839
    Appalachia
    Vehicle:
    Midnight Venture
    Bigger A/T LT Tires, Slight Lift, Sliders, Rack, Lights, etc.
    So why are you going back to the OEM shocks in the rear, while keeping the Eibach up front?

    I would consider using just the .8 setting on the front shock along with the stock rear height. This will be the TRD Pro lift height and will ride quite well.
     
  8. Mar 11, 2021 at 2:46 PM
    #38
    thatchtt2001

    thatchtt2001 [OP] New Member

    Joined:
    Feb 24, 2021
    Member:
    #19961
    Messages:
    50
    Gender:
    Male
    First Name:
    TTT
    Northwest Ohio
    Vehicle:
    2016 Trail
    Eibach Stage 1 Shocks with OEM Springs.
    My thinking was to keep the same rake as what I have with eibach all around.. 2.75 front and 1.0 in the rear, then by switching the rear to oem springs I figured it would lower an inch and then when I put the oem springs on the front Eibach shocks, I would want to lower it the same amount as the rear so I just figured go down one inch to the 1.6 setting. Thought that would keep it at the same angle as current lift...
     
  9. Mar 16, 2021 at 5:12 PM
    #39
    Fortuner

    Fortuner New Member

    Joined:
    Jan 12, 2021
    Member:
    #19082
    Messages:
    157
    CA
    Vehicle:
    2021 4Runner TRD Off Road Premium w/KDSS

    So I just had my tires re-balanced and while I was there, I lowered my tire pressure on the 275/70 KO2's to 36PSI for daily driving...HUGE difference in ride quality! I may have jumped the gun a bit on blaming the Eibachs...they're still on the firmer side, there is no doubt about this, but the overinflated tires made a much bigger impact than I assumed.
     
    nimby likes this.
  10. Mar 16, 2021 at 7:12 PM
    #40
    thatchtt2001

    thatchtt2001 [OP] New Member

    Joined:
    Feb 24, 2021
    Member:
    #19961
    Messages:
    50
    Gender:
    Male
    First Name:
    TTT
    Northwest Ohio
    Vehicle:
    2016 Trail
    Eibach Stage 1 Shocks with OEM Springs.
    Yeah my tires are load rating c LT's, but when I bought it and picked it up from the dealer they had inflated the tires to 50psi and it was rough. It's a lot better now that it's warmer and lower psi. I am wondering if I got SL rated passenger tires of it would be even better.. maybe the extreme cold made the rubber extra stiff through the winter..
     
    Fortuner[QUOTED] likes this.
  11. Mar 16, 2021 at 7:16 PM
    #41
    2016 4Runner SR5

    2016 4Runner SR5 CONTACT ME FOR CORNFED LIFT SPACERS 631-202-8245

    Joined:
    Jan 29, 2017
    Member:
    #3447
    Messages:
    1,076
    Gender:
    Male
    First Name:
    #Rensing Off-Road
    North Carolina
    Shocks are all the same with or without KDSS and a complete used set is worth no more than $150
     
    Fortuner likes this.
  12. Mar 17, 2021 at 8:15 AM
    #42
    koukimonster

    koukimonster DYNO4

    Joined:
    Aug 4, 2020
    Member:
    #15907
    Messages:
    839
    Appalachia
    Vehicle:
    Midnight Venture
    Bigger A/T LT Tires, Slight Lift, Sliders, Rack, Lights, etc.
    What were they at? Properly inflated LT tires means 38-40. Now that it's warming up outside, mine are at about 41 cold. I can feel it getting a little harsh once they warm up to 43. Man, you guys have obviously never driven a real sports car if you think the 4Runner is harsh lol.

    Yes, an SL rated tire will of course ride softer. That's why Toyota equipped them on the 4Runner.
     
  13. Mar 17, 2021 at 8:52 AM
    #43
    Fortuner

    Fortuner New Member

    Joined:
    Jan 12, 2021
    Member:
    #19082
    Messages:
    157
    CA
    Vehicle:
    2021 4Runner TRD Off Road Premium w/KDSS

    They were inflated to 50PSI. I'm now at 36 Cold and highly prefer this setup.

    Coming out of two BMW's back to back, both with 19" and 20" run-flats respectively....I'd consider those sports cars, and run-flats ride like junk. There's a difference between a firm sports car ride and a harsh/jittery ride that makes everything in the 4Runner rattle.
     
  14. Mar 17, 2021 at 9:58 AM
    #44
    koukimonster

    koukimonster DYNO4

    Joined:
    Aug 4, 2020
    Member:
    #15907
    Messages:
    839
    Appalachia
    Vehicle:
    Midnight Venture
    Bigger A/T LT Tires, Slight Lift, Sliders, Rack, Lights, etc.
    Yes runflats are awful! 50 PSI would be too on a 4Runner... yikes!
     
  15. Apr 23, 2021 at 9:51 AM
    #45
    Freedom

    Freedom New Member

    Joined:
    Apr 6, 2021
    Member:
    #20777
    Messages:
    11
    Gender:
    Male
    Call any tire company and give them your vehicle and their tire and size and they will calculate the correct psi.
     
  16. Apr 23, 2021 at 4:26 PM
    #46
    CK96734

    CK96734 New Member

    Joined:
    Mar 30, 2021
    Member:
    #20626
    Messages:
    7
    Gender:
    Male
    Vehicle:
    2021 SR5 Premium
    For those raving about ironman, are you guys using the foam cell (pro) or gas shocks?
     
    captrussia253[QUOTED] likes this.
  17. Apr 23, 2021 at 5:23 PM
    #47
    captrussia253

    captrussia253 New Member

    Joined:
    Jul 5, 2020
    Member:
    #15320
    Messages:
    521
    Gender:
    Male
    First Name:
    Ruslan
    PNW
    Vehicle:
    2017 Tundra Platinum 2016 T4R SR5P
    I have the stage two with gas shocks and ride is amazing. I can only image how good the foam cell ride.
     
    CK96734[QUOTED] likes this.

Products Discussed in

To Top