1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Body Role.

Discussion in '5th Gen 4Runners (2010-2024)' started by Dave.625, May 15, 2016.

  1. May 15, 2016 at 10:19 AM
    #1
    Dave.625

    Dave.625 [OP] New Member

    Joined:
    Apr 29, 2016
    Member:
    #1951
    Messages:
    1
    Gender:
    Male
    Vehicle:
    2014 4Runner Trail Premium
    I own a 2014 4Runner, Trail Premium with KDSS. The passenger side is approximately 3/4" lower than the drivers side, when measured from the center of the axle hub to the bottom of the fender well. The body leans to the passage side. I believe it may have something to do with the KDSS but not sure. Has anyone else ran across this issue? Is there a fix?
     
  2. May 15, 2016 at 4:41 PM
    #2
    SixthSnail

    SixthSnail I have no idea what I'm doing

    Joined:
    Jan 24, 2016
    Member:
    #1449
    Messages:
    393
    Gender:
    Male
    First Name:
    Matt
    Los Angeles/Santa Barbara
    Vehicle:
    '16 4Runner SR5 4x4
    It's known as the Toyota lean. Tacomas have it too. Pretty sure it has to do with how the rig is configured with location of the gas tank and other parts. You can fix it with a spacer if you want. It's not an issue though. Comes from factory that way. Especially the 2014+

    BTW, body roll is when turning and your truck leans, not a difference in suspension height. If you want more input on the suspension, you may want to change the title. :cheers:
     
    Relentless likes this.

Products Discussed in

To Top