1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Bilstein and wheelers combo

Discussion in '4th Gen 4Runners (2003-2009)' started by tuby4, Apr 25, 2019.

  1. Apr 25, 2019 at 7:05 PM
    #1
    tuby4

    tuby4 [OP] New Member

    Joined:
    Apr 8, 2019
    Member:
    #9457
    Messages:
    5
    Gender:
    Male
    Vehicle:
    2004 4Runner v6 4wd
    Building...
    need recommendation for those with 4th gen 4Runners using 5100 and wheelers t1/t12 coils. Mine is a 2004 v6 4x4 and no extra weight unless out camping or hitting forest trails. This is my daily driver.

    What perch/setting do I put the 5100 front at to level or have a sight rake with the rear since the rear is only lifted from the coils?


    I’ve read that the rear nets and settles at about 2”.

    Thanks
     
  2. Apr 26, 2019 at 4:41 AM
    #2
    RonT4R

    RonT4R New Member

    Joined:
    Mar 24, 2015
    Member:
    #526
    Messages:
    568
    Gender:
    Male
    First Name:
    Ron
    Virginia Beach
    Vehicle:
    2007 4runner SR5 4WD
    I had to set my 5100's to the middle slot (I think 1.5") because my lower control arm cam bolts are frozen, any higher I would have needed to adjust them. I will be replacing the cam bolts soon. I am using stock coils.
     

Products Discussed in

To Top