1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Biggest Tire on a Stock Pro

Discussion in '5th Gen 4Runners (2010+)' started by 4wheelgreg, Jan 11, 2022.

  1. Jan 11, 2022 at 8:51 AM
    #1
    4wheelgreg

    4wheelgreg [OP] New Member

    Joined:
    Dec 29, 2021
    Member:
    #24855
    Messages:
    52
    Gender:
    Male
    First Name:
    Greg
    Bensalem Pa
    Vehicle:
    2022 4Runner TRD Pro
    I just picked up a 2022 Pro , whats the biggest / widest tire you can run on a Pro ?
    I would like 35’s maybe a 34” as we all know not all tires are created equal , I find Nitto Ridge grapplers to be the most accurate .
    I have 34’s on my 2020 LC 200 , with the land cruisers the biggest problem is the KDSS arm , glad the Pro’s did not uses the KDSS .
    I still have to find how modification friendly my dealer is , some how I got sucked into a platinum Toyota extended warranty , guy started out at 3k for 7yrs 100k miles and knew I was not buying one , he knew I have a many vehicles to drive and don’t put many miles , he came back with 1100 bucks for that warranty , that was pretty cheap for platinum 4yrs extra .
    Not sure if I’ll do anything but 35’s would be nice , any one running 35x12.50 ?
     
    Gnim559 likes this.
  2. Jan 11, 2022 at 9:16 AM
    #2
    Mtbpsych

    Mtbpsych New Member

    Joined:
    Dec 3, 2018
    Member:
    #7922
    Messages:
    1,597
    Gender:
    Male
    Vehicle:
    2018 SR5
    With lots of work you can fit 35’s on a stock pro.
     
    Bob and LandCruiser like this.
  3. Jan 11, 2022 at 9:19 AM
    #3
    Jynarik

    Jynarik I like boobies

    Joined:
    Jul 10, 2019
    Member:
    #10510
    Messages:
    1,567
    Gender:
    Male
    Austin Texas
    Vehicle:
    2019 trd pro voodoo
    That warranty gonna be pointless by the time you’re done making the mods to fit 35’s :D
     
  4. Jan 11, 2022 at 9:27 AM
    #4
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    1,704
    Gender:
    Male
    Vehicle:
    TRD Pro | Limited 7 Seats |SR5 7 (sold) | TRD ORP (crashed by dealer)
    I thought 275/70R17 is the biggest you can fit to stock TRD Pro.

    With a spacer kit or suspension lift you can fit 285/70R17 or 255/80r17 right?

    35s need suspension lift + body lift + body mount chop right?
     
    Thatbassguy likes this.
  5. Jan 11, 2022 at 9:31 AM
    #5
    LandCruiser

    LandCruiser I have Toyotas

    Joined:
    Apr 15, 2021
    Member:
    #20965
    Messages:
    1,138
    Gender:
    Male
    CCC
    Vehicle:
    A 4Runner
    Get out your sawzall, bud.
     
  6. Jan 11, 2022 at 9:41 AM
    #6
    whippersnapper02

    whippersnapper02 New Member

    Joined:
    Feb 27, 2019
    Member:
    #8982
    Messages:
    303
    Gender:
    Male
    First Name:
    Christian
    Vehicle:
    2019 4Runner TRD Offroad
    Get the hacksaw out.

    104556d1386611703-going-bigger-5th-gen-t_0ddcf42c6aae00e011783b6a0eb4f29559c8ad1e.png
     
  7. Jan 11, 2022 at 2:09 PM
    #7
    banjos-n-beer

    banjos-n-beer New Member

    Joined:
    Oct 7, 2021
    Member:
    #23686
    Messages:
    384
    Gender:
    Male
    First Name:
    Steve
    Maine
    Vehicle:
    2018 Pro
    I’d like to jump to 285s at some point. But only if minor tweaking is required.

    I think I’ve read the Pro already has had the fender liner mod done at the port. Is this correct?

    Is it possible to modify the front mud flaps to make them fit? I’d prefer to keep them.

    Sorry for the slight hijack.
     
    Thatbassguy likes this.
  8. Jan 11, 2022 at 4:05 PM
    #8
    Jynarik

    Jynarik I like boobies

    Joined:
    Jul 10, 2019
    Member:
    #10510
    Messages:
    1,567
    Gender:
    Male
    Austin Texas
    Vehicle:
    2019 trd pro voodoo
    Some brand tires will fit fine on a pro without mods. Most require a smidge of plastic modding

    they do not come with any mod to make bigger tires fit.
    You can try to use a heat gun but doubtful it will do much.
     
  9. Jan 11, 2022 at 4:10 PM
    #9
    18 trd off road

    18 trd off road New Member

    Joined:
    May 2, 2021
    Member:
    #21246
    Messages:
    30
    Gender:
    Male
    First Name:
    Joe
    Vehicle:
    21 trd pro lunar rock
    275/70/17 and they rub

    E080EF48-FEBA-4DE0-B90B-5B0F46454842.jpg
     
    Thatbassguy likes this.
  10. Jan 11, 2022 at 4:13 PM
    #10
    Jynarik

    Jynarik I like boobies

    Joined:
    Jul 10, 2019
    Member:
    #10510
    Messages:
    1,567
    Gender:
    Male
    Austin Texas
    Vehicle:
    2019 trd pro voodoo
    Probably because your wheel offset is different than OEM
     
  11. Jan 11, 2022 at 4:16 PM
    #11
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    1,704
    Gender:
    Male
    Vehicle:
    TRD Pro | Limited 7 Seats |SR5 7 (sold) | TRD ORP (crashed by dealer)
    Is that TRD Pro? (Sorry, I was curious missing roof rack, badges, does not seem to have that slight lift front with fox shocks)

    I know 2019 TRD Pro didn't have roof rack but that color is new. So wasn't sure if its TRD Pro.

    My TRD ORP with stock wheels did not rub with 275/70/17.
     
    Thatbassguy likes this.
  12. Jan 11, 2022 at 4:22 PM
    #12
    Trail Runnah

    Trail Runnah New Member

    Joined:
    May 8, 2020
    Member:
    #14189
    Messages:
    584
    Gender:
    Male
    Vehicle:
    2013 T4R Trail Edition
    Stock
    If you want 35's without a lot of work you should have picked up a Bronco or a Wrangler, haha.

    However, if you did manage to fit the 34s or 35's on the 4Runner, you would probably want to regear the axles as well.
     
    Thatbassguy likes this.
  13. Jan 11, 2022 at 4:26 PM
    #13
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    1,704
    Gender:
    Male
    Vehicle:
    TRD Pro | Limited 7 Seats |SR5 7 (sold) | TRD ORP (crashed by dealer)
    It only cost $4000 for lift + tires + regear for Wrangler from factory. :D

    Just my lift cost me $4000..:facepalm:And Toyota Dealer crashed after a month..:frustrated:
     
    Thatbassguy likes this.
  14. Jan 11, 2022 at 4:35 PM
    #14
    Jynarik

    Jynarik I like boobies

    Joined:
    Jul 10, 2019
    Member:
    #10510
    Messages:
    1,567
    Gender:
    Male
    Austin Texas
    Vehicle:
    2019 trd pro voodoo
    maybe for some cheap rough country 6” lift :D
     
    Thatbassguy and Mtbpsych like this.
  15. Jan 11, 2022 at 4:51 PM
    #15
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    1,704
    Gender:
    Male
    Vehicle:
    TRD Pro | Limited 7 Seats |SR5 7 (sold) | TRD ORP (crashed by dealer)
    upload_2022-1-11_17-49-56.jpg

    Tires - LT315/70R17C BFG KO2 Load C
    Lift - 1.5 lift with Fox shocks
    Gears - 4.56:1 (vs stock 3.73)

    Zgqx9AHPENu7niPQj5rUoSALh2XCgdekUvaFjPm5_413a3c239e6caec8f4b4276b3c62a3b6bb0ede2f.jpg
     
    Reldn, Thatbassguy and Trail Runnah like this.
  16. Jan 11, 2022 at 4:56 PM
    #16
    Trail Runnah

    Trail Runnah New Member

    Joined:
    May 8, 2020
    Member:
    #14189
    Messages:
    584
    Gender:
    Male
    Vehicle:
    2013 T4R Trail Edition
    Stock
    Pretty much a bargain when you think about it. Especially considering it's probably fully warrantied, and if financing you're spreading it out over five or six years.

    Room to grow too, because I think the 4.56 would probably be sufficient with 37 or 38's as well.

    (Clearly I'm the Jeep fanboy of the group haha)
     
    suaveflooder, Thatbassguy and kmeeg like this.
  17. Jan 11, 2022 at 4:59 PM
    #17
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    1,704
    Gender:
    Male
    Vehicle:
    TRD Pro | Limited 7 Seats |SR5 7 (sold) | TRD ORP (crashed by dealer)
    Same here..:D
     
    Thatbassguy and Trail Runnah like this.
  18. Jan 11, 2022 at 7:50 PM
    #18
    Mr. Snuffleupagus

    Mr. Snuffleupagus New Member

    Joined:
    Dec 6, 2021
    Member:
    #24531
    Messages:
    8
    Gender:
    Male
    First Name:
    Brandt
    Vehicle:
    2022 TRD Pro
    Look into a Westcott Designs pre-collar lift and you can fit 285 70 R17s on stock rims
     
    LandCruiser and Thatbassguy like this.
  19. Jan 11, 2022 at 8:35 PM
    #19
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    6,839
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    Definitely the way to go if you want big tires!

    The guy at my off-road shop says 37's fit (a Jeep) with a 2" lift and some minor trimming.

    Regeared and 35" from factory is crazy cheap!
     
    Trail Runnah and kmeeg like this.
  20. Jan 11, 2022 at 11:21 PM
    #20
    suaveflooder

    suaveflooder New Member

    Joined:
    Sep 9, 2021
    Member:
    #23264
    Messages:
    282
    Gender:
    Male
    First Name:
    Brian
    Vehicle:
    2021 4Runner Venture
    I would own a jeep in a second if they were more reliable. I want one so badly, but I drive around 3000 miles a month :facepalm::facepalm::facepalm:
     
  21. Jan 12, 2022 at 3:37 AM
    #21
    banjos-n-beer

    banjos-n-beer New Member

    Joined:
    Oct 7, 2021
    Member:
    #23686
    Messages:
    384
    Gender:
    Male
    First Name:
    Steve
    Maine
    Vehicle:
    2018 Pro
    Yeah, I don't recall where I saw that about the fender liner, but I remember thinking that is was odd because I have not seen that mentioned anywhere else. As much as I want the 285s (purely for visual appeal), I'll probably stick with stock size the first time around. Thx
     
    Thatbassguy likes this.
  22. Jan 12, 2022 at 3:45 AM
    #22
    Snickel Fritz

    Snickel Fritz Do not develop this member's app

    Joined:
    Oct 7, 2018
    Member:
    #7385
    Messages:
    363
    You can fit tires. If not, just ride on the hubs, and try not to cry about it. A real man drags his own chariot, and doesn't involve the UN Human Rights Council! Heeyah, get to it!
     
  23. Jan 12, 2022 at 4:54 AM
    #23
    MI-FL off roader

    MI-FL off roader T4R Hobby/Addict

    Joined:
    Aug 21, 2015
    Member:
    #878
    Messages:
    846
    Gender:
    Male
    First Name:
    Brett
    Merritt Island, FL
    Vehicle:
    03' SR5 Sport - 12' Limited
    Too many mods and too much money
    This page has always been helpful
    https://www.tacomaworld.com/tirecalc?tires=265-70r17-315-70r17

    Grimm Jeeper has a gear ratio calculator that is pretty damn precise, because it has a selection tab for the A750
    http://www.grimmjeeper.com/gears.html

    Here is a screenshot of the Taco World tire size calc.
    Stock 5th gen size vs a 315/70/17 = 34.31" Not sure if the Pro has a bigger size than a stock SR5. Lift, UCAs and Hack away is my motto. 1" body lift makes life a little easier for 35s as well.
    Screenshot_2022-01-12-07-43-50.jpg
     
    JaSC likes this.
  24. Jan 12, 2022 at 11:32 AM
    #24
    TRDLE

    TRDLE New Member

    Joined:
    Dec 22, 2021
    Member:
    #24749
    Messages:
    152
    Gender:
    Male
    Duluth, MN
    Vehicle:
    '22 TRD Pro
    I've seen the same. There was a youtube video by one of the lift or tire companies or something. I know he said something about the Pro being able to fit a wider tire or something. I don't remember any details to make this post even a little bit helpful, but I can at least confirm you're not crazy.
     
    banjos-n-beer and Thatbassguy like this.
  25. Jan 12, 2022 at 12:09 PM
    #25
    TRDLE

    TRDLE New Member

    Joined:
    Dec 22, 2021
    Member:
    #24749
    Messages:
    152
    Gender:
    Male
    Duluth, MN
    Vehicle:
    '22 TRD Pro
    Here it is. Westcott Designs. He says the fenders are trimmed on the Pro, not on the other trims.

    https://youtu.be/Yyt_0rptEPk
     
  26. Jan 12, 2022 at 1:19 PM
    #26
    Vic_

    Vic_ New Member

    Joined:
    Jan 3, 2022
    Member:
    #24951
    Messages:
    1
    Vehicle:
    White 4Runner
    Any 4Runner that comes with the TRD Pro rims from factory or put on at dealer has this "Bumper Cut". Coworker of mine has an sr5 with "blackout package" and her bumper has been trimmed to fit the TRD Pro rim. I am sure it is due to the offset of the wheel.
     
    Thatbassguy, TRDLE and SlvrSlug like this.
  27. Jan 12, 2022 at 1:57 PM
    #27
    fffffff

    fffffff New Member

    Joined:
    Jul 13, 2021
    Member:
    #22329
    Messages:
    25
    Gender:
    Male
    This is correct its due to Offset. I don't have a Pro, but I had 285s with off road wheels (+14 offset), no rubbing (2.5"f1.5"r suspension lift). Switched to wheels with -10 offset and had significant rubbing on the front bumper, fender, and mud flaps. Removed Mud Flaps, trimmed front bumper, pushed in fender line.

    Port instructions for TRD Pro fender mod.

    https://static.nhtsa.gov/odi/tsbs/2019/MC-10162789-9999.pdf
     
    atk411 and MI-FL off roader like this.
  28. Jan 13, 2022 at 3:39 AM
    #28
    banjos-n-beer

    banjos-n-beer New Member

    Joined:
    Oct 7, 2021
    Member:
    #23686
    Messages:
    384
    Gender:
    Male
    First Name:
    Steve
    Maine
    Vehicle:
    2018 Pro
    Hmm, that very well could have been the source, because I have seen that video. Good find.
     
  29. Jan 13, 2022 at 3:42 AM
    #29
    banjos-n-beer

    banjos-n-beer New Member

    Joined:
    Oct 7, 2021
    Member:
    #23686
    Messages:
    384
    Gender:
    Male
    First Name:
    Steve
    Maine
    Vehicle:
    2018 Pro
    Hmm, so there is a good chance mine has had the trimming and fender liner mods done. So in theory, there's a chance only the front mud guards would need to be removed. I'd be okay with that in order to fit 285s, but I don't want to do any body-mount chopping.

    The plot "thicks"..........
     
  30. Jan 13, 2022 at 5:42 PM
    #30
    18 trd off road

    18 trd off road New Member

    Joined:
    May 2, 2021
    Member:
    #21246
    Messages:
    30
    Gender:
    Male
    First Name:
    Joe
    Vehicle:
    21 trd pro lunar rock
    I took off the rack and badges once I got it home
     

Products Discussed in

To Top