1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

98 3.4 4x4 swap into 91 3.Slo

Discussion in '2nd Gen 4Runners (1990-1995)' started by Nineonerunner, Aug 23, 2014.

  1. Aug 23, 2014 at 4:53 PM
    #1
    Nineonerunner

    Nineonerunner [OP] New Member

    Joined:
    Jul 13, 2014
    Member:
    #202
    Messages:
    4
    Gender:
    Male
    Vehicle:
    1991 Toy 4Runner 3.4 swapped
    Currently swapping in a beefy 3.4
    Hello everyone! I am doing a 3.4 swap from a 98 4runner into my 1991 3.0... So far I've pulled everything out and redid the timing belt and a few other thing. The motor is all put back together and it took me almost 7.5 hours to get the 3.4 into the runner yesterday! I was having trouble getting the motor and tranny to line up and slide into the tranny. Finally we got it! After that we wanted to get the motor mounts all lined up and bolted and we finally were able to get it right on and got her bolted to the mounts.. My main concern now is the throttle cable being to short as well as the cruise control and a fee other things I can think of.. What am I supposed to do? Almost everything on the 3.4 is backwards and to short. What has everyone else done with these problems?
     

Products Discussed in

To Top