1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

95 4Runner Lower Ball Joints

Discussion in '2nd Gen 4Runners (1990-1995)' started by Precursor, Jun 5, 2019.

  1. Jun 5, 2019 at 9:19 AM
    #1
    Precursor

    Precursor [OP] New Member

    Joined:
    Jun 5, 2019
    Member:
    #10162
    Messages:
    1
    Gender:
    Male
    Does anyone know if LH and RH lower ball joints for a 95 4Runner are interchangeable? They do have different part numbers. I've done the RH (passenger side) and I'm preparing to do the LH, but I see that I crossed up the parts - I installed the ball joint with LH part number on the RH side. Wondering if I need to rectify that or if they're really the same.

    Thanks!
     
  2. Feb 12, 2020 at 2:32 PM
    #2
    thegillmachine

    thegillmachine New Member

    Joined:
    Feb 9, 2020
    Member:
    #13077
    Messages:
    11
    Gender:
    Male
    Vehicle:
    1995 4Runner 3.0L 4×4
    I don't know what brand you went with, but in my experience with ball joints (both times I've done them), the only differentiation is between uppers and lowers. Granted, just because I've never seen different part numbers for left and right doesn't mean they don't exist, just that in my (relatively limited) experience, I haven't seen em.
     

Products Discussed in

To Top