1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

91 gear selector problem

Discussion in '2nd Gen 4Runners (1990-1995)' started by Reptileis, Nov 5, 2015.

  1. Nov 5, 2015 at 2:16 PM
    #1
    Reptileis

    Reptileis [OP] New Member

    Joined:
    Nov 5, 2015
    Member:
    #1141
    Messages:
    1
    Gender:
    Male
    First Name:
    Mike
    Vehicle:
    91 4runner.
    As stated.. My 91 automatic gear selector lever is having issues.

    It's difficult to get it in park.... Takes a lot of force... And very tough to get into the drive gears..... Tons of pulling from park down hard.

    Any ideas?
    Thanks.
     
  2. Dec 23, 2015 at 3:27 PM
    #2
    Little Jim

    Little Jim New Member

    Joined:
    Dec 21, 2015
    Member:
    #1307
    Messages:
    30
    Gender:
    Male
    First Name:
    Jim
    Vehicle:
    '90 4Runner SR 3.0 V6
    Remove rear side bumpers, deck plate mod, relocate rear window switch to dash, removed rear wiper
    In the short term you can use the shift release button in front of your shifter. Mine was getting difficult also, until I disabled the shift module inside. I've had no problems since. Simply unplug the wires going from the silver box.
     
To Top