1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

4th Gen: Mini H1 6.0 HID projector retrofit

Discussion in 'Lighting' started by zopperman, Apr 6, 2014.

  1. Apr 6, 2014 at 8:12 PM
    #1
    zopperman

    zopperman [OP] New Member

    Joined:
    Apr 3, 2014
    Member:
    #3
    Messages:
    785
    Gender:
    Male
    First Name:
    Zak
    Arlington, VA
    Vehicle:
    2003 Silver Limited V8
    LED & HID positive
    Mini H1 6.0 projector
    35W DDM HIDs in 5000k
    Gattling gun 2.0 Shroud
    Blacked out bezels
    Color matched shrouds and little orange reflector triangles
    80mm White XB LED halos with diffuser rings (so you can't see the greenish tint)

    _MG_5302_2383fefb9e6e18eeef75a401c17d610bf7dbdfad.jpg


    Halo mock up:

    AEF16BF4-6437-4EBF-A427-A2EEDCE4FD9D-152_07601180cbfebe2d8aec59468518b230992f3df3.jpg

    Here's how I mounted the halo. So what I did was push the wires out of the clip and push the wire through an existing hole on the gattling 2.o shroud, then used some heat shrink over the wires of the halo to keep them together

    DC753425-CC06-4EE9-BDB6-B6E013B22153-152_2e5752e0fab4c9fd7dd88e76efc674c85a899d42.jpg



    A732E5DA-0D88-4A81-B60A-4C902964D2FD_64e58c24326ebd36806fb808db9d81ed08d4731a.jpg

    D80F4C44-A232-40D0-8FCE-DFBE7A166C16_96eb0944131b1715670e2e4ec0a9cf1d5ec49e0b.jpg

    30F9BED2-E846-4E19-80F2-EAECEAA7A165_7a4e2599fddd72d01688d348388016b33adbe9ad.jpg

    770FD0D0-20C9-4E7F-952F-3856A39FED86_19d84571b2c4b7bbc5a87695056ed9c13c977e51.jpg
     
    LDYNGLR, Runnit and Emelianenkov like this.
To Top