1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

4R GARAGE - share photos of wherever it is that you park & store your Runner

Discussion in '5th Gen 4Runners (2010-2024)' started by djwantke, Dec 27, 2023.

  1. Dec 27, 2023 at 1:54 PM
    #1
    djwantke

    djwantke [OP] New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    2,993
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    this is my 4R GARAGE today after the most cleaning I'm willing to do
    I've joked I spend more time in here than in my bed. my wife could concur.

    share photos of wherever it is that you park & store your Runner

    IMG_20231227_134328115.jpg
    IMG_20230526_203133171.jpg
     
    kolter45, Earlron, 2Toys and 3 others like this.
  2. Dec 27, 2023 at 2:05 PM
    #2
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    5,908
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeaks
    No garage here. Carport.

    [​IMG]

    I can drive into the back yard for service on a concrete slab, but it is not covered. I do what I can where it sits if possible.
     
  3. Dec 27, 2023 at 2:38 PM
    #3
    laxman09

    laxman09 New Member

    Joined:
    Dec 7, 2023
    Member:
    #37129
    Messages:
    319
    Gender:
    Male
    Mahoning Valley, OHIO
    Wow talk about tight fit!!
     
  4. Dec 27, 2023 at 2:41 PM
    #4
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    4,825
    Gender:
    Male
  5. Dec 27, 2023 at 2:57 PM
    #5
    djwantke

    djwantke [OP] New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    2,993
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Haha yes - I have about 1-1/2ft between end of hitch skid to door.
    And only a 1/2in roof clearance w/ jerry cans :rolleyes:

     
  6. Dec 27, 2023 at 3:52 PM
    #6
    FourBelugas

    FourBelugas New Member

    Joined:
    Jul 7, 2023
    Member:
    #33816
    Messages:
    278
    Vehicle:
    23 white ORP
    I am a big fan of carports, provides all the protection that is critical and still easy to get things done without taking up house space.

    Of the 2 4Rs we have, one lives in the garage and is seldom driven, the other one is an outdoor runner, I wish we can build a carport but it is impossible with all the redtape.
     
  7. Dec 27, 2023 at 6:44 PM
    #7
    mac1usa

    mac1usa New Member

    Joined:
    Oct 20, 2020
    Member:
    #17452
    Messages:
    2,123
    Covered up and tucked away for winter (no winter salt)

    IMG_0730.png
     
  8. Dec 27, 2023 at 6:46 PM
    #8
    laxman09

    laxman09 New Member

    Joined:
    Dec 7, 2023
    Member:
    #37129
    Messages:
    319
    Gender:
    Male
    Mahoning Valley, OHIO
    Next to the wife's cx5. Gotta back out a bit to get the kids in either car.

    PXL_20231216_183708799.jpg
     
  9. Dec 27, 2023 at 7:03 PM
    #9
    ChessGuy

    ChessGuy New Member

    Joined:
    Oct 22, 2021
    Member:
    #23918
    Messages:
    590
    Gender:
    Male
    First Name:
    LR
    Houston
    Vehicle:
    2020 TRD Pro / 2017 Tacoma TRD Pro
    Too many..... Performance: • Magnusum Supercharger • Gibson exhaust with dual black tip • Pedal Commander * PowerBrakes • Suspension – Old Man Emu BP-51 front and back with Medium load coils • Tires: AT3 Faulken Wildpeak – 285/70/17 • Wheels: Relations Race Wheels, RR7-H with -12 offset • Full roof rack and ladder by Westcott Design (removed the stock Yakima basket) • Molle storage panels by Rago fabrication • Front light brackets by Rago • Illuminator light bracket by Rago (roof rack location) Lights • Morimoto front and back with sequential signals • Morimoto fog lights and side mirrors with sequential signals • 40” Baja design light bar for roof rack • 20” S8 Baja design driving combo (winch location) • Squadron sport baja design ditch lights • S2 Chase lights by baja designs (mounted on roof) In the bay: • Odyssey 34-PC Battery • SDQH Aluminum billet battery terminals and bracket • Switch Pro 9100 with aluminum tray • Anytime front and back camera • ARB twin compressor Recovery & Protection: • Smittybilt X20 synthetic rope winch • Factor 55 fairlead and flatlink • Southern Style Off-road (SSO) low profile bumper • SSO stage 2 high clearance wings • Weekend warrior recovery kit by treaty oak • RCI – skid plates – entire vehicle + catalytic converter protection wings Interior: • Nano Ceramic IR – Avery Dennison Window tint – all windows • Several phone mounts • Upgraded Rear Hatch lift gate struts (ladder is heavy) • Boom blaster horn switch (featuring La cucaracha)
    All my tools are behind the Taco. I try to keep these two "things" inside at all times, sometimes it works and sometimes it doesn't.

    20230402_160518.jpg
     
    kolter45, brownersd, sam95 and 3 others like this.
  10. Dec 27, 2023 at 7:07 PM
    #10
    djwantke

    djwantke [OP] New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    2,993
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    :hattip:
     
  11. Dec 27, 2023 at 7:09 PM
    #11
    RusPro17

    RusPro17 Back home again!!

    Joined:
    Sep 26, 2017
    Member:
    #4821
    Messages:
    1,629
    Gender:
    Male
    First Name:
    Don
    Pa.
    Vehicle:
    2023 TRD Pro Solar Octane
    SCS wheels and Westcott lift
    I’m collecting mods to add to my 4runner in a few weeks. IMG_4634.jpg
     
    raimieb, Earlron, Harringbr99 and 4 others like this.
  12. Dec 27, 2023 at 7:34 PM
    #12
    djwantke

    djwantke [OP] New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    2,993
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    wow super clean solar!
    I would like that flooring please

    Screenshot_20231227-193045.png
     
    LCJ77 and RusPro17 like this.
  13. Dec 27, 2023 at 9:10 PM
    #13
    2Toys

    2Toys Imperial Star Cruiser

    Joined:
    Jul 6, 2020
    Member:
    #15337
    Messages:
    1,288
    Gender:
    Male
    First Name:
    Gordon
    NorCal
    Vehicle:
    2019 4Runner TRDORP
    IMG_7165.jpg This is at work.IMG_3231.jpg

    IMG_4321.jpg

    IMG_4482.jpg

    This is at home.
     
    MeefZah, Saker, Reddawg1100 and 10 others like this.
  14. Dec 28, 2023 at 5:05 AM
    #14
    Jere39

    Jere39 Rattlesnake Trail - Sproul SF

    Joined:
    Oct 29, 2021
    Member:
    #24022
    Messages:
    72
    Gender:
    Male
    Sky Island, PA
    Vehicle:
    2022 4Runner SR5 MGM
    IMG_0736.jpg
     
    2Toys and mac1usa like this.
  15. Dec 28, 2023 at 5:09 AM
    #15
    Opie-IN

    Opie-IN New Member

    Joined:
    Oct 11, 2023
    Member:
    #36115
    Messages:
    42
    Gender:
    Male
    Vehicle:
    2023 ORP Magnetic Gray
    Unfortunately mine is crammed into a little corner of the garage with all my wife's tubs of silly decorations.

    20231114_121128.jpg
     
    djwantke[OP] and 2Toys like this.
  16. Dec 28, 2023 at 5:53 AM
    #16
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    4,825
    Gender:
    Male
    It would be a dream to hang around that garage, smell those engines, possibly watch maintenance. Thanks for sharing those pics.
     
    djwantke[OP] and 2Toys[QUOTED] like this.
  17. Dec 28, 2023 at 5:55 AM
    #17
    mac1usa

    mac1usa New Member

    Joined:
    Oct 20, 2020
    Member:
    #17452
    Messages:
    2,123
    For sure that’s for the real high rollers.
     
    2Toys and kmeeg[QUOTED] like this.
  18. Dec 28, 2023 at 6:38 AM
    #18
    ChessGuy

    ChessGuy New Member

    Joined:
    Oct 22, 2021
    Member:
    #23918
    Messages:
    590
    Gender:
    Male
    First Name:
    LR
    Houston
    Vehicle:
    2020 TRD Pro / 2017 Tacoma TRD Pro
    Too many..... Performance: • Magnusum Supercharger • Gibson exhaust with dual black tip • Pedal Commander * PowerBrakes • Suspension – Old Man Emu BP-51 front and back with Medium load coils • Tires: AT3 Faulken Wildpeak – 285/70/17 • Wheels: Relations Race Wheels, RR7-H with -12 offset • Full roof rack and ladder by Westcott Design (removed the stock Yakima basket) • Molle storage panels by Rago fabrication • Front light brackets by Rago • Illuminator light bracket by Rago (roof rack location) Lights • Morimoto front and back with sequential signals • Morimoto fog lights and side mirrors with sequential signals • 40” Baja design light bar for roof rack • 20” S8 Baja design driving combo (winch location) • Squadron sport baja design ditch lights • S2 Chase lights by baja designs (mounted on roof) In the bay: • Odyssey 34-PC Battery • SDQH Aluminum billet battery terminals and bracket • Switch Pro 9100 with aluminum tray • Anytime front and back camera • ARB twin compressor Recovery & Protection: • Smittybilt X20 synthetic rope winch • Factor 55 fairlead and flatlink • Southern Style Off-road (SSO) low profile bumper • SSO stage 2 high clearance wings • Weekend warrior recovery kit by treaty oak • RCI – skid plates – entire vehicle + catalytic converter protection wings Interior: • Nano Ceramic IR – Avery Dennison Window tint – all windows • Several phone mounts • Upgraded Rear Hatch lift gate struts (ladder is heavy) • Boom blaster horn switch (featuring La cucaracha)
    That's my kind of a dream garage for the 4R. Thinking...which chopper do I want to take today?
     
    2Toys[QUOTED] likes this.
  19. Dec 28, 2023 at 7:54 AM
    #19
    2Toys

    2Toys Imperial Star Cruiser

    Joined:
    Jul 6, 2020
    Member:
    #15337
    Messages:
    1,288
    Gender:
    Male
    First Name:
    Gordon
    NorCal
    Vehicle:
    2019 4Runner TRDORP
    Aviation maintenance has been my lifelong career. It started as a dream just as you said.

    Helicopters will drain your wallet faster than you would believe. Crazy expensive. The Boeing is on a whole other level.

    Alas, Covid and the politicians in San Francisco have caused all of the helicopters to be sold. I have been in awe and shocked at how a thriving charter and tour business has been taken down - and now gone. Iwent from taking care of five helicopters and three corporate jets down to just two corporate jets today. No one knows what the future brings...
     
    kmeeg[QUOTED] likes this.
  20. Dec 28, 2023 at 8:08 AM
    #20
    Durango Dave

    Durango Dave New Member

    Joined:
    Jul 29, 2023
    Member:
    #34451
    Messages:
    81
    Gender:
    Male
    Durango, Colorado
    Vehicle:
    2023 4Runner Off-Road Premium w/ KDSS
    600 sq. ft. heated garage :bananadance: My wife doesn't drive anymore so we're down to one car with lots of extra space in the garage :)4Runner10.jpg
     
    kjfswkr, BGH2023, ChessGuy and 2 others like this.
  21. Dec 28, 2023 at 10:20 AM
    #21
    Earlron

    Earlron New Member

    Joined:
    Sep 26, 2022
    Member:
    #28830
    Messages:
    3
    Gender:
    Male
    Sandy Eggo
    Vehicle:
    2018 Off Road Premium
    CBI aluminum full skids, sliders, rear bumper and covert front bumper. Diode Dynamics 30" bar, SSC2 ditch lights and backup lights. AccuTune Suspension; -Front Coilovers: Fox 2.5 DSC Remote, 0-3 Lift -Front UCA: AccuTune Offroad -Rear Shocks: Fox 2.0 LSC Remote -Rear Springs: Eibach 1″ Lift (0-200lb)
    20231228_081451.jpg 20231228_081426.jpg 20231228_081554.jpg 20231228_081326.jpg 20231228_082333.jpg
     
    Last edited: Dec 28, 2023
  22. Dec 28, 2023 at 10:25 AM
    #22
    mac1usa

    mac1usa New Member

    Joined:
    Oct 20, 2020
    Member:
    #17452
    Messages:
    2,123

    Sorry you have had to go through that. Yeah sadly much of the news from/about California is not positive.
     
    2Toys[QUOTED] and kmeeg like this.
  23. Dec 28, 2023 at 10:26 AM
    #23
    RusPro17

    RusPro17 Back home again!!

    Joined:
    Sep 26, 2017
    Member:
    #4821
    Messages:
    1,629
    Gender:
    Male
    First Name:
    Don
    Pa.
    Vehicle:
    2023 TRD Pro Solar Octane
    SCS wheels and Westcott lift
    Off all week for the holidays and doing the wife’s Acura. Spend a lot of time in the garage. Lol. Even more coming Feb 1st. Being retired I can work on the mods!! IMG_4770.jpg
     
    Texrun50, alittleoff, 2Toys and 3 others like this.
  24. Dec 28, 2023 at 10:49 AM
    #24
    LANHLOY

    LANHLOY New Member

    Joined:
    Jun 25, 2023
    Member:
    #33592
    Messages:
    16
    Gender:
    Male
    First Name:
    Sal
    SoCal
    Vehicle:
    '23 ORP Lunar Rock
    Here’s mines. I don’t like a lot of things in garage. I like to keep thing simple, and uncluttered.

    7486E403-119E-432E-9802-ABFAA28241A4.jpg

    Wife Tessi and my 4Runner.

    6888D521-0E78-482B-A12A-719E6F357AE4.jpg
     
    brownersd, Gharddog03, 2Toys and 2 others like this.
  25. Dec 28, 2023 at 11:07 AM
    #25
    RumHamRunner73

    RumHamRunner73 Dead on with a zero

    Joined:
    Nov 24, 2022
    Member:
    #29771
    Messages:
    2,383
    Gender:
    Male
    First Name:
    Philip
    Oakboro, N.C
    Vehicle:
    2022 4 Runner Limited. Blizzard Pearl
    Mine sleeps here.

    IMG_20231228_140439.jpg
     
  26. Dec 28, 2023 at 11:42 AM
    #26
    LCJ77

    LCJ77 New Member

    Joined:
    Jul 12, 2022
    Member:
    #27794
    Messages:
    674
    Gender:
    Male
    First Name:
    Kevin
    Gilbertsville,Pa.
    Vehicle:
    2023 TRD Pro Ice Cap
    Ceramic Tint, D/S grab Handle, waiting for Brite Box Anytime, may add Raptor lights
  27. Dec 28, 2023 at 12:13 PM
    #27
    CO RUNNER

    CO RUNNER New Member

    Joined:
    Apr 18, 2023
    Member:
    #32423
    Messages:
    14
    Gender:
    Male
  28. Dec 28, 2023 at 7:23 PM
    #28
    2Toys

    2Toys Imperial Star Cruiser

    Joined:
    Jul 6, 2020
    Member:
    #15337
    Messages:
    1,288
    Gender:
    Male
    First Name:
    Gordon
    NorCal
    Vehicle:
    2019 4Runner TRDORP
    Beautiful garage and truck! Mind if I come over? I'm jelly of the lift.
     
    djwantke[OP] and BGH2023 like this.
  29. Dec 29, 2023 at 5:53 AM
    #29
    Earlron

    Earlron New Member

    Joined:
    Sep 26, 2022
    Member:
    #28830
    Messages:
    3
    Gender:
    Male
    Sandy Eggo
    Vehicle:
    2018 Off Road Premium
    CBI aluminum full skids, sliders, rear bumper and covert front bumper. Diode Dynamics 30" bar, SSC2 ditch lights and backup lights. AccuTune Suspension; -Front Coilovers: Fox 2.5 DSC Remote, 0-3 Lift -Front UCA: AccuTune Offroad -Rear Shocks: Fox 2.0 LSC Remote -Rear Springs: Eibach 1″ Lift (0-200lb)
    Thanks man! I'm getting too old for using jackstands and a creeper. The lift is sweet, it's a 10k Challenger made in the USA.
     
  30. Dec 31, 2023 at 12:31 PM
    #30
    Stoney Ranger

    Stoney Ranger New Member

    Joined:
    Mar 19, 2021
    Member:
    #20419
    Messages:
    891
    Gender:
    Male
    Driftless Area
    Vehicle:
    '18 SR5 Nauti Blue
    4x Rockers/Skids-Dobi-275's-Fr/R Bpr-Winch-Stickers-ALF

Products Discussed in

To Top