1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

3" lift and tire Fitmit

Discussion in '5th Gen 4Runners (2010+)' started by SCOTTHAMMONDS23, Jan 13, 2017.

  1. Jan 13, 2017 at 6:27 AM
    #1
    SCOTTHAMMONDS23

    SCOTTHAMMONDS23 [OP] New Member

    Joined:
    Jan 13, 2017
    Member:
    #3358
    Messages:
    2
    First Name:
    scott
    Vehicle:
    2015 $runner SR5 4x4
    Toytec 3" Lift
    I recently put a 3 " toytec lift on my 2015 4Runner 4x4 assuming I could get 285/70/17 under it. I was mistaken because they rubbed when making hard turns. I would sacrifice tall tires for wide tires. does anyone have suggestions on what size tire to try from experience?
     
  2. Jan 13, 2017 at 9:08 AM
    #2
    brochacho

    brochacho New Member

    Joined:
    Jun 20, 2016
    Member:
    #2179
    Messages:
    467
    Gender:
    Male
    PNW
    Vehicle:
    2018 Sequoia TRD Sport
    Where exactly is it rubbing? Did you buy after market rims as well? Which 285 tires did you put on?
     
  3. Jan 13, 2017 at 9:57 AM
    #3
    SCOTTHAMMONDS23

    SCOTTHAMMONDS23 [OP] New Member

    Joined:
    Jan 13, 2017
    Member:
    #3358
    Messages:
    2
    First Name:
    scott
    Vehicle:
    2015 $runner SR5 4x4
    Toytec 3" Lift
    285/70/17 terra grappler. I was using an after market rim with 0 offset which is the same as OEM. It's rubbing in the front on the front inner fender
     
  4. Jan 13, 2017 at 10:32 AM
    #4
    brochacho

    brochacho New Member

    Joined:
    Jun 20, 2016
    Member:
    #2179
    Messages:
    467
    Gender:
    Male
    PNW
    Vehicle:
    2018 Sequoia TRD Sport
    Rubbing when turning or all the time? On both sides or just one? There is a mod where you can easily push forward the front inner fender for more clearance (link below). Have you got an alignment done yet?
     
    PVT Pablo likes this.
  5. Jan 14, 2017 at 3:16 PM
    #5
    4runick

    4runick New Member

    Joined:
    May 11, 2016
    Member:
    #1997
    Messages:
    10
    Gender:
    Male
    First Name:
    Nick
    Vehicle:
    2014 silver 4Runner
    Basically toytec ultimate, tint, lower front valance, rock lights, 20" light bar, 285/70/17 Dueler AT, All Pro UCA's
    I think there is an offset on the stock rims.
     
  6. Jan 22, 2017 at 5:31 PM
    #6
    Dimhof

    Dimhof More is better

    Joined:
    Feb 13, 2016
    Member:
    #1554
    Messages:
    178
    Gender:
    Male
    First Name:
    David
    Cottonwood Heights, UT
    Vehicle:
    2015 4runner trail with KDSS
    If you are running spacers you could take them out. You can also remove the front mud flaps if it's rubbing on the back of the front well. I doubt it's on the body mount but you can always search this site or like previously mentioned on how and where to bend/trim. Or you can take it to your local offroad shop and pay them an hour of labor to set you up
     

Products Discussed in

To Top