1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Toyota 0w20 availability? Ladders Has anyone completely covered the rear interior? Slippery plastic rear bumper deck is hell on my dogs' egress and ingress.... any ideas? Aftermarket remote start High Flying Sequential Dynamic Turn Signal Lights

2023 4runner front valance

Discussion in '5th Gen 4Runners (2010-2024)' started by Pathpounder, Apr 26, 2023.

  1. Apr 26, 2023 at 1:13 PM
    #1
    Pathpounder

    #1
    Pathpounder [OP] New Member

    Joined:
    Feb 17, 2023
    Member:
    #31302
    Messages:
    8
    Gender:
    Male
    Just purchased the blackout valances for my 4runner. From researching I see the front cap needs to be removed as they have apparently added some backing of some sort behind the bumper and the radar detect needs to be uncoupled as well as the fog lights. Anyone done the 2023 yet and seen any other unforseen issues? I was going to just paint them but I just can't think it would last. Yes I've searched the forum but most are attaching by just removing the valance alone on previous years. Sorry if I'm yanking anyone's chain but updates create new challenges sometimes.
     
    Pathpounder, Apr 26, 2023
    #1
  2. Apr 26, 2023 at 1:57 PM
    #2
    EC15

    #2
    EC15 New Member

    Joined:
    May 10, 2022
    Member:
    #27013
    Messages:
    68
    Gender:
    Male

    It's the same as previous years and yes, it can be done without removing the bumper.
     
    EC15, Apr 26, 2023
    #2
    Pathpounder[QUOTED][OP] likes this.
  3. Apr 26, 2023 at 2:02 PM
    #3
    Pathpounder

    #3
    Pathpounder [OP] New Member

    Joined:
    Feb 17, 2023
    Member:
    #31302
    Messages:
    8
    Gender:
    Male
    Thanks. Much appreciated.
     
    Pathpounder, Apr 26, 2023
    #3
  4. Apr 26, 2023 at 2:21 PM
    #4
    josephp732

    #4
    josephp732 New Member

    Joined:
    Jan 14, 2020
    Member:
    #12714
    Messages:
    324
    Gender:
    Male
    Vehicle:
    2019 Silver Limited, 2021 White TRD OR Premium
    josephp732, Apr 26, 2023
    #4
    Jere39, CO1224, djwantke and 1 other person like this.
  5. Apr 26, 2023 at 5:18 PM
    #5
    Pathpounder

    #5
    Pathpounder [OP] New Member

    Joined:
    Feb 17, 2023
    Member:
    #31302
    Messages:
    8
    Gender:
    Male
    Thanks for the video. Looks like that will do it.
     
    Pathpounder, Apr 26, 2023
    #5
    josephp732 likes this.
  6. Apr 26, 2023 at 5:30 PM
    #6
    wax poetic

    #6
    wax poetic New Member

    Joined:
    Mar 28, 2023
    Member:
    #32027
    Messages:
    71
    Gender:
    Male
    Arizona Desert
    Vehicle:
    21 Super White TRD OR
    If you have the TRD skidplate you'll have to remove that ... I was like why the fuck can't I do this haha. Now I can remove the valence in about 15-20 including removing the skidplate. The first time is a bit tricky finding a few of the clips.
     
    wax poetic, Apr 26, 2023
    #6
    Pathpounder[OP] likes this.
  7. Apr 26, 2023 at 6:36 PM
    #7
    djwantke

    #7
    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    488
    Gender:
    Male
    First Name:
    Derek
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 4.5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Wheel well hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch *new April 29 RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit **new May 5 PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity Bought, in the garage queue, April/May 2023: -1" EZ Flares - only one side installed lol -Apex Overland 4runner KDSS recovery points -first needed SPC ball joint replacement kit Wanted - bolt on cat shields, Sumo Springs,
    It's faster to just remove your front bumper it's actually not scary or hard believe me I thought it would be
     
    djwantke, Apr 26, 2023
    #7
    Pathpounder[OP] likes this.
  8. Apr 26, 2023 at 6:37 PM
    #8
    djwantke

    #8
    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    488
    Gender:
    Male
    First Name:
    Derek
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 4.5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Wheel well hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch *new April 29 RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit **new May 5 PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity Bought, in the garage queue, April/May 2023: -1" EZ Flares - only one side installed lol -Apex Overland 4runner KDSS recovery points -first needed SPC ball joint replacement kit Wanted - bolt on cat shields, Sumo Springs,
    What kinda hands ya'll got to do that with bumper on lol
     
    djwantke, Apr 26, 2023
    #8
    Pathpounder[OP] likes this.
  9. Apr 26, 2023 at 6:39 PM
    #9
    djwantke

    #9
    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    488
    Gender:
    Male
    First Name:
    Derek
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 4.5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Wheel well hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch *new April 29 RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit **new May 5 PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity Bought, in the garage queue, April/May 2023: -1" EZ Flares - only one side installed lol -Apex Overland 4runner KDSS recovery points -first needed SPC ball joint replacement kit Wanted - bolt on cat shields, Sumo Springs,
    No one ever seems to mention you gotta get 13 clips back in after. When bumpers off clips out or in in 60 sec
     
    djwantke, Apr 26, 2023
    #9
    Pathpounder[OP] likes this.
  10. Apr 27, 2023 at 5:35 AM
    #10
    Pavo

    #10
    Pavo New Member

    Joined:
    Sep 21, 2020
    Member:
    #16867
    Messages:
    481
    Gender:
    Male
    I have a 2022, the clips were extremely stiff to do so I ended up partially removing the front bumper, that helped a ton. Watch the video by trd John on how to remove front bumper it’s the most helpful. The only added step you will have to do is remove the 10mm for the bracket holding the front radar (you will see what I mean)
     
    Pavo, Apr 27, 2023
    #10
    Pathpounder[OP] likes this.
  11. Apr 27, 2023 at 6:19 AM
    #11
    Pathpounder

    #11
    Pathpounder [OP] New Member

    Joined:
    Feb 17, 2023
    Member:
    #31302
    Messages:
    8
    Gender:
    Male
    Thanks. I will look that one up.
     
    Pathpounder, Apr 27, 2023
    #11
  12. Apr 28, 2023 at 7:22 AM
    #12
    STrooper

    #12
    STrooper New Member

    Joined:
    Aug 21, 2021
    Member:
    #22926
    Messages:
    221
    Gender:
    Male
    First Name:
    Jack
    Vehicle:
    4runner
    STrooper, Apr 28, 2023
    #12
  13. Apr 28, 2023 at 7:23 AM
    #13
    josephp732

    #13
    josephp732 New Member

    Joined:
    Jan 14, 2020
    Member:
    #12714
    Messages:
    324
    Gender:
    Male
    Vehicle:
    2019 Silver Limited, 2021 White TRD OR Premium
    No - I had to remove the rear bumper cover.
     
    josephp732, Apr 28, 2023
    #13
  14. Apr 28, 2023 at 8:05 AM
    #14
    Connor MacLeod

    #14
    Connor MacLeod New Member

    Joined:
    Nov 27, 2022
    Member:
    #29802
    Messages:
    46
    Gender:
    Male
    First Name:
    Connor
    Vehicle:
    2023 TRD Off Road
    I did the replacement on my '23 OR without removing the bumper. It was probably 30 degrees in the garage when I did mine, and it was hell on my fingers getting the clips out, so I'd recommend doing it when the temperature is warm and the clips and other plastic parts seem to flex a little better for removal.
     
    Connor MacLeod, Apr 28, 2023
    #14
    Pathpounder[OP] likes this.
  15. Apr 28, 2023 at 1:34 PM
    #15
    Pathpounder

    #15
    Pathpounder [OP] New Member

    Joined:
    Feb 17, 2023
    Member:
    #31302
    Messages:
    8
    Gender:
    Male
    20230428_153029.jpg
    A nice 60 degree day so I went for it. Had 1 clip that gave me some trouble but otherwise install went smooth. Rain in the forecast so I'll wait for another day for the rear. Thanks for all the advice.
     
    Pathpounder, Apr 28, 2023
    #15
    TN_FunRunner, josephp732, Fishn43 and 3 others like this.
  16. Apr 28, 2023 at 11:14 PM
    #16
    SanJuan

    #16
    SanJuan New Member

    Joined:
    Dec 29, 2021
    Member:
    #24852
    Messages:
    15
    did you purchase from 4runner Lifestyle?
     
    SanJuan, Apr 28, 2023
    #16
    Pathpounder[OP] likes this.
  17. Apr 29, 2023 at 4:00 AM
    #17
    Pathpounder

    #17
    Pathpounder [OP] New Member

    Joined:
    Feb 17, 2023
    Member:
    #31302
    Messages:
    8
    Gender:
    Male
    Yes I did. Very quick shipping.
     
    Pathpounder, Apr 29, 2023
    #17
    SanJuan likes this.
  18. May 25, 2023 at 7:11 AM
    #18
    Shilo5000

    #18
    Shilo5000 New Member

    Joined:
    Jan 28, 2022
    Member:
    #25389
    Messages:
    48
    Gender:
    Male
    First Name:
    Lucas
    OC
    Vehicle:
    ‘22 TRD PRO
    Anyone find a way to get new clips? 4Runner lifestyle is only the valance. Mine came loose and when I got it all the way off, a few clips were missing. Now I have to get a new valance and clips ‍♂️. I may have to go OEM which is super pricey for a piece of plastic.
     
    Shilo5000, May 25, 2023
    #18
  19. May 25, 2023 at 8:08 AM
    #19
    djwantke

    #19
    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    488
    Gender:
    Male
    First Name:
    Derek
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 4.5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Wheel well hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch *new April 29 RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit **new May 5 PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity Bought, in the garage queue, April/May 2023: -1" EZ Flares - only one side installed lol -Apex Overland 4runner KDSS recovery points -first needed SPC ball joint replacement kit Wanted - bolt on cat shields, Sumo Springs,
    Damn sorry to hear that, I recently needed OEM yellow valance cap clip replacements (down behind front wheels), ridiculous prices. Same with hex bolt screws for fender and windshield.

    So for bumper valances, after being in a lot of threads on the topic I've never seen anyone talk about replacing, sorry. OEM is prolly the choice you know you gotta make. This problem is why just didn't risk it, stopped trying to remove those clips with the bumper on because I was starting to potentially damage them due to frustration :p
     
    djwantke, May 25, 2023
    #19
  20. May 25, 2023 at 8:09 AM
    #20
    Pathpounder

    #20
    Pathpounder [OP] New Member

    Joined:
    Feb 17, 2023
    Member:
    #31302
    Messages:
    8
    Gender:
    Male
    Pathpounder, May 25, 2023
    #20
  21. May 25, 2023 at 8:19 AM
    #21
    djwantke

    #21
    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    488
    Gender:
    Male
    First Name:
    Derek
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 4.5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Wheel well hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch *new April 29 RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit **new May 5 PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity Bought, in the garage queue, April/May 2023: -1" EZ Flares - only one side installed lol -Apex Overland 4runner KDSS recovery points -first needed SPC ball joint replacement kit Wanted - bolt on cat shields, Sumo Springs,
    Is it just me or do all quantities in that link say Currently Unavailable
     
    djwantke, May 25, 2023
    #21
  22. May 25, 2023 at 8:19 AM
    #22
    djwantke

    #22
    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    488
    Gender:
    Male
    First Name:
    Derek
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 4.5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Wheel well hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch *new April 29 RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit **new May 5 PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity Bought, in the garage queue, April/May 2023: -1" EZ Flares - only one side installed lol -Apex Overland 4runner KDSS recovery points -first needed SPC ball joint replacement kit Wanted - bolt on cat shields, Sumo Springs,
    But ya no giv er on Amazon
     
    djwantke, May 25, 2023
    #22
  23. May 25, 2023 at 8:22 AM
    #23
    Pathpounder

    #23
    Pathpounder [OP] New Member

    Joined:
    Feb 17, 2023
    Member:
    #31302
    Messages:
    8
    Gender:
    Male
    I show quantities. Sorry if it doesn't show for you.

    Screenshot_20230525-102112_Firefox.jpg
     
    Pathpounder, May 25, 2023
    #23
  24. May 25, 2023 at 11:10 AM
    #24
    glwood54

    #24
    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    4,415
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeaks
    You could also post a "WTB - bumper valance clips" on the 5th Gen for sale section. There's got to be plenty of OR or Pro 4R owners who have replaced their bumpers with aftermarket, and may have these just lying around. They may send you what you need for the price of the postage.
     
    glwood54, May 25, 2023
    #24
  25. May 25, 2023 at 7:44 PM
    #25
    Shilo5000

    #25
    Shilo5000 New Member

    Joined:
    Jan 28, 2022
    Member:
    #25389
    Messages:
    48
    Gender:
    Male
    First Name:
    Lucas
    OC
    Vehicle:
    ‘22 TRD PRO
    I ordered some OEM and Amazon ones. Took some doing, but got the old ones off without taking off the bumper, but I have a feeling I’ll be pulling the bumper to install once the replacement valance (also OEM) shows up.
     
    Shilo5000, May 25, 2023
    #25
  26. May 31, 2023 at 10:11 PM
    #26
    Shilo5000

    #26
    Shilo5000 New Member

    Joined:
    Jan 28, 2022
    Member:
    #25389
    Messages:
    48
    Gender:
    Male
    First Name:
    Lucas
    OC
    Vehicle:
    ‘22 TRD PRO
    Not that anyone cares, but… new OEM valance arrived today. I ended up installing without removing the bumper (got partway through taking it off and got frustrated with all the wiring harnesses and clips - decided to save that for another project). Those Amazon clips worked perfectly. OEM valance ended up being ~$200 (toyota San Diego has free shipping and was much cheaper than my local dealer who wouldn’t match the price) which is ridiculous for a piece of plastic, but happy with it and didn’t have to worry about matching the rear valance… if I was doing front and rear, I probably would have gone with 4Runner lifestyle.
     
    Shilo5000, May 31, 2023 at 10:11 PM
    #26
Register FREE to Reply!

Products Discussed in

Rexka 25pcs Front & Rear Spoiler Moulding Clip Compatible with Toyota Lexus 75392-35220 4Runner, Camry, Corolla, FJ Cruiser, Highlander, Prius, Prius Prime, Prius V, RAV4
$8.99
To Top