1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2021 Raptor Light Issue

Discussion in '5th Gen 4Runners (2010+)' started by FREEDMAN1979, Sep 11, 2021.

  1. Sep 11, 2021 at 10:09 PM
    #1
    FREEDMAN1979

    FREEDMAN1979 [OP] New Member

    Joined:
    Sep 11, 2021
    Member:
    #23314
    Messages:
    1
    Gender:
    Male
    Hello, hopefully posting in the right place. I’m working on a friend’s 4Runner and he’s installing a set of raptor lights with a nilight harness kit (https://www.amazon.com/gp/product/B071ZPX32N?ie=UTF8)
    Wired it up exactly with the add a fuse box like in the YouTube video (https://youtu.be/RKZGNc4ez5M) but unfortunately when you’d turn the vehicle on and turn on the switch the engine would stall but the lights would stay on, I Checked all grounds and connections but couldn’t figure out the issue. I got to thinking about the relay, I couldn’t hear it click on or off, is it possible the relay was bad internally and pulling to much current? Also none of the fuses blew either.
     

Products Discussed in

To Top