1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

1st gen Wheel & Tire Size

Discussion in 'Wheels & Tires' started by DustStorm4x4, Jul 29, 2015.

  1. Jul 29, 2015 at 2:37 PM
    #1
    DustStorm4x4

    DustStorm4x4 [OP] New Member

    Joined:
    Jul 27, 2015
    Member:
    #803
    Messages:
    8
    Whats the biggest tires I can go with the stock rims and no lift? Currently its a 30" tire.
    What's the biggest tire size before you have to regear? I'd like to run 33"
     
  2. Nov 25, 2017 at 12:50 PM
    #2
    beatnik_glory

    beatnik_glory New Member

    Joined:
    Nov 15, 2017
    Member:
    #5044
    Messages:
    1
    Gender:
    Male
    First Name:
    Mike
    I see no one has posted a reply to this and it is an old thread. I am going to hijack.

    I am looking for a wheel set that is close to stock that will fit a Gen 1 used as a daily driver. Do wheel sets from later Gen 4Runners and Tacoma Trucks fit the Gen 1? What is the Bolt Pattern and Offset etc...

    Thanks.
     
  3. Nov 26, 2017 at 8:24 AM
    #3
    BestGen

    BestGen Huge Member

    Joined:
    Apr 12, 2014
    Member:
    #57
    Messages:
    363
    Gender:
    Male
    First Name:
    Paul
    Haunted Turnbull Canyon, CA
    Vehicle:
    1988 4Runner 22RE/W56, '93 G144 4.88s, Spartan Locker, AllPro Sliders, BFG 33/10.5s, 4Crawler 1.5" BJS, OME 2" Dakar springs
    33"KM2s, 4.88s, Spartan Locker, TG rear bumper, AllPro Kickout sliders, 4Crawler 1.5" BJS, OME 2" Dakar springs.
    The largest tire you can run on a 1st Gen without a lift is a 33/10.5 on the stock 15x6" wheels. I've been running this setup for years. Just do the 'pinch-weld mod'. Pretty much any toyota rim with the 6 on 5.5" bolt circle will work. 15" IFS wheels will not work on a SFA truck. IFS rims have too much backspace and will contact the tierods. IMG_0350.jpg
     
    Last edited: May 19, 2018
To Top