1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

1990 tranny/clutch prob

Discussion in '2nd Gen 4Runners (1990-1995)' started by 4runnerliv, Aug 5, 2015.

  1. Aug 5, 2015 at 10:33 AM
    #1
    4runnerliv

    4runnerliv [OP] New Member

    Joined:
    Aug 5, 2015
    Member:
    #829
    Messages:
    1
    Vehicle:
    1990 manual 4wdrive
    Have a 1990 4wd manual v6 with clutch transmission prob. Haa about 300,000/milea and a rebuilt engine about 40,000 miles ago. At the same time a new clutch was installed. First symtom was a lot of play on the clutch goi ng into first. Then became very difficult to get into gear, started popping out of gear then wouldn't start without the no clutch button. We've removed the transmission and gear box. Two springs on the flywheel are broken and the clutch plate is bowed. And a ball bearing fell out from somewhere when we removed the transmission. Anyone have any ideas what might be going on? Thanks
     
To Top