1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

16" rims on 4th Gen 4Runners

Discussion in '4th Gen 4Runners (2003-2009)' started by RonT4R, Nov 7, 2016.

  1. Nov 7, 2016 at 9:15 AM
    #1
    RonT4R

    RonT4R [OP] New Member

    Joined:
    Mar 24, 2015
    Member:
    #526
    Messages:
    640
    Gender:
    Male
    First Name:
    Ron
    Virginia Beach
    Vehicle:
    2007 4runner SR5 4WD
    Has anyone mounted 16" rims on 4th Gen 4Runners with out issue? I've heard 16" is too small for the front calipers with the rotor guard.

    Thx,
    Ron
     
  2. Apr 4, 2017 at 5:18 PM
    #2
    thumper53

    thumper53 New Member

    Joined:
    Jun 2, 2015
    Member:
    #657
    Messages:
    2
    Gender:
    Male
    First Name:
    Dale
    Hanahan, South Carolina
    Vehicle:
    2009 4Runner Trail Edition
    Custom Led Mount in Lower Grill Rear Bumper Mounted LED Lights, 2x operation, backup and switch JVC Arsenal Head Unit with Backup Cam, Factory Camry XM Antenna Color Matched Bilstein 5100 Front set at 1.75" lift Bilstein 24-186049 Rear Shocks Monroe Sway Bar Links Greasable Teflon Sway Bar Bushings Nitto Terra Grappler LT265/75R16 D 119Q on 16 x 8" Pro Comp 7069 Black with spline lugs Lifetime Led High, Low Beam and Fog lights Led Interior Lighting
    I have an 09 Trail Edition, it came with OEM 16" alloy wheels, I replaced them with Pro Comp 16 x 9 rims, no problems. If you have a sport with the 338mm rotors you will need to run 17" wheels. If you have the 319mm rotors you can run 16" wheels.
     
    Last edited: Apr 5, 2017
  3. Apr 5, 2017 at 7:55 AM
    #3
    RonT4R

    RonT4R [OP] New Member

    Joined:
    Mar 24, 2015
    Member:
    #526
    Messages:
    640
    Gender:
    Male
    First Name:
    Ron
    Virginia Beach
    Vehicle:
    2007 4runner SR5 4WD
    Thx, mine is a SR5 but it was special ordered with leather so I probably need to measure.
     
  4. Apr 5, 2017 at 9:42 AM
    #4
    thumper53

    thumper53 New Member

    Joined:
    Jun 2, 2015
    Member:
    #657
    Messages:
    2
    Gender:
    Male
    First Name:
    Dale
    Hanahan, South Carolina
    Vehicle:
    2009 4Runner Trail Edition
    Custom Led Mount in Lower Grill Rear Bumper Mounted LED Lights, 2x operation, backup and switch JVC Arsenal Head Unit with Backup Cam, Factory Camry XM Antenna Color Matched Bilstein 5100 Front set at 1.75" lift Bilstein 24-186049 Rear Shocks Monroe Sway Bar Links Greasable Teflon Sway Bar Bushings Nitto Terra Grappler LT265/75R16 D 119Q on 16 x 8" Pro Comp 7069 Black with spline lugs Lifetime Led High, Low Beam and Fog lights Led Interior Lighting
    The easiest way to figure out rotor size is to check the caliper casting number. It is on the lower side of the caliper on the inside, crawl under behind the wheel and you can see it. There are lots of posts that discuss this, basically the 13 WG or WL is 319mm and the 13WH is 338mm. If you have the WH version you will have to run 17" rims to get the clearance you need.
     
  5. Apr 5, 2017 at 12:41 PM
    #5
    RonT4R

    RonT4R [OP] New Member

    Joined:
    Mar 24, 2015
    Member:
    #526
    Messages:
    640
    Gender:
    Male
    First Name:
    Ron
    Virginia Beach
    Vehicle:
    2007 4runner SR5 4WD
    Thanks
     
To Top