What have you done to your 5th Gen 4Runner today?

Excellent solution on the sleep stand, very nice! May steal your idea and execute it in my truck....very nice indeed

What did your go with under the carpet for the platform?

 

Great setup!!

 

Installled my YodaTEQ underhood lighting kit. Install was a breeze and the light is fantastic!

 

The frame of the platform is made of 2x4s, which is what the holes are cut in for the legs.
The top surface is plywood, I used something close to 5/8" thick. (it was some odd 32nd size)
For the legs, I used 1 1/2" thick wall PVC, which has an odd outside dia. that I couldnt find a hole saw to match.
So the legs have a 1 1/2" coupling at the end, which ended up making it a holesaw size I could find.
I still had to sand down the couplings just a bit to make them fit but it wasnt bad.
If you wanted, you can try using 2" PVC, and no coupling, I think there was a hole saw to fit that, it just seemed like overkill and more bulky overall.
Little awkward, but I can put in and out myself. I place the 4 shorter rear legs in it, lift it into place, then insert the 2 longer front legs.

 

Clean engine!
I love the light & battery tie down.
Do you remember where you got the battery takedown?
Looks great! Every install is nice & clean.

 

I agree. You made me head over and see if they had any tie downs left. I scored a pro but it doesn’t look like any TRD are left.
Oh yeh, AJt designs https://www.ajtdesign-llc.com/online-store/Battery-Clamp-p90489289

 

I want that TRD red tiedown! @travieb1 want to sell? Lol
That fits perfectly with our color theme.
That is beautiful. Maybe have a local fab place make me one & have it anodized!
TRD/Toyota is cracking down!

 

Ohhhh... maybe when I get my dual battery system..I will switch over to two black ones to offset the red optima top... I’ll let you know when that happens!

 

Please, keep me in mind!
Nice build also. Btw

 

Dang! I didn’t know they stopped incorporating the “TRD” in their products! I wanted to get a second fob but at least I got this one!!

 

Since buying the T4R a month ago I have been finding it harder & harder to find parts for sale that say TRD if Toyota didn't make it.
I want that fob also but told it is no longer available.
Buy while you can... Toyota is watching the aftermarket!

 

The one I just ordered says “TRD PRO”. I had the “TRD” on my taco and I would have swiped it before the trade if I had known they would have stopped making them!

 

After you drop a 40% sale & they sell everything they have...
It maybe time to reevaluate their stance on accessories. (Price/ availability). Lol on price.
They just saw a glimpse of what people will do if you offer a discount & have a good product.
$70 or $80 for a battery retainer that does nothing is slightly insane. Yet, I would still buy it.

 

I like the light.

 

Bought the

$85 Viair 88P - 00088 Tire Inflator Portable On/Offroad Air Compressor for Car, Truck, SUV & RV | 12V Heavy Duty Pump 120 PSI, Alligator Clip, Twist Chuck

Viair 88P portable compressor.

Also found an ARB single drawer on FB marketplace that looks brand new and is very affordable, but is about 2 hours away. I'm fairly certain its just a little too long for the cargo area, which is a total bummer! Does anyone have any of the ARB drawer systems installed? I am waiting for the guy to give me the exact model # so I can confirm specs and figure out whether or not I need to make the trip out there.

 

Got mine stuck. Stock tires have no traction. Hauling the wood trailer across the field and lost all traction spun and sunk right in.

 

Anybody have a recommendation for a front bumper that will fit my 2019 Limited? Had my eye on Artec Industries Venture, but the Limited is the only trim it doesn't fit. Aaarrgh!

 

Finally got the 4 washed and waxed. Had to touch up some rock chips. An bolted these bad boys up.

 

Those look nice where did you get them?

 

Only one I've found so far is the Hefty Aluminum, which looks pretty good, although not cheap. The Hefty Tube fits too, but is a little to radical for me.

 

Thanks

 

https://www.apexoverland.com/shop-by-brand/Front-Recovery-Points-p111923535

 

SSO said this: "In order for the slimline to work with your limited, you will need to swap out the face for a trail or SR5 then you can use the slimline on your truck." Is that doable, replacing the whole front?

 

Pricey yep. Solid looking and sold out. Thought I might have had use of those was buried in the field out back this weekend. Field was still too soft for the 4Runner and the fully loaded wood trailer. Stick tires oh well. Saving for something more aggressive now.

 

Is there anyone here that has a bunch of stuff mounted onto the oem bars? (plano boxes, maxtraxx, etc)

 

not as of yet, but i am beginning to plot this stuff out. an aftermarket roof rack is still overkill/$$$ for me at this point, so I am going to work with what I have. probably do rhino rack fishing rod holders on one side and potentially a slim basket on the other side.
I'd love to track down some more 10-13 cross bars so the rack can support more weight, but finding two was already a months long hassle.

 

Just got the tires rotated and balanced and received 50 bolt on hp in the mail.

 

If you find some ideas and don't mind sharing then shoot me a pm. The slim basket idea sounds good. Could buy a hitch carrier and mount it long ways and then you'd have the ability to mount an awning or something on the side of the basket.

 

It's a little more money but I would look into beefy crossbars like Ragos or LFD's, for instance, if I was not going to go full roof rack. Those cross bars increase the versatility of the stock rack big time

 

Yeah the money part is the big hold up. I've looked into them and they are usually out of stock so I was just going to do something with what I've got.