1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

TRD Shift knob

Discussion in '5th Gen 4Runner Parts Marketplace (2010-2024)' started by mikegronholz, Feb 4, 2019.

  1. Feb 4, 2019 at 9:41 AM
    #1
    mikegronholz

    mikegronholz [OP] New Member

    Joined:
    Jan 24, 2019
    Member:
    #8542
    Messages:
    21
    Gender:
    Male
    Coming out of TRD Off Road ... 1000 miles on the rig. Is what it is. $65 to your door in the lower 48.
     
  2. Feb 4, 2019 at 11:06 AM
    #2
    Bob

    Bob Member Staff Member

    Joined:
    Apr 3, 2014
    Member:
    #1
    Messages:
    2,149
    First Name:
    Bob
    SoCal
    Pic
     
  3. Feb 4, 2019 at 12:17 PM
    #3
    mikegronholz

    mikegronholz [OP] New Member

    Joined:
    Jan 24, 2019
    Member:
    #8542
    Messages:
    21
    Gender:
    Male
    Thought I had one saved ... nope. I’ll get one as soon as I leave the office.
     
    Bob[QUOTED] likes this.
  4. Feb 4, 2019 at 2:43 PM
    #4
    mikegronholz

    mikegronholz [OP] New Member

    Joined:
    Jan 24, 2019
    Member:
    #8542
    Messages:
    21
    Gender:
    Male
    Pic attached

    EDFCD8DA-FDAE-40C7-BFFE-CB19CDC501D2.jpg
     
  5. Feb 4, 2019 at 5:58 PM
    #5
    Tstrang

    Tstrang New Member

    Joined:
    Jan 14, 2019
    Member:
    #8429
    Messages:
    54
    Gender:
    Male
    First Name:
    Tommy
    Vehicle:
    2018 4Runner
  6. Feb 4, 2019 at 6:35 PM
    #6
    mikegronholz

    mikegronholz [OP] New Member

    Joined:
    Jan 24, 2019
    Member:
    #8542
    Messages:
    21
    Gender:
    Male
    $60 is the lowest it’s going. It’s brand new
     
  7. Feb 4, 2019 at 6:47 PM
    #7
    Tstrang

    Tstrang New Member

    Joined:
    Jan 14, 2019
    Member:
    #8429
    Messages:
    54
    Gender:
    Male
    First Name:
    Tommy
    Vehicle:
    2018 4Runner
    K easy install?
     
  8. Feb 4, 2019 at 7:09 PM
    #8
    mikegronholz

    mikegronholz [OP] New Member

    Joined:
    Jan 24, 2019
    Member:
    #8542
    Messages:
    21
    Gender:
    Male
    Twist off, twist on.
     
  9. Feb 4, 2019 at 7:13 PM
    #9
    2016Pro

    2016Pro Why all of the Pro hate?

    Joined:
    Nov 11, 2018
    Member:
    #7739
    Messages:
    1,462
    Hiw many hp does it add? As much as a cai?
     
  10. Feb 4, 2019 at 7:26 PM
    #10
    Tstrang

    Tstrang New Member

    Joined:
    Jan 14, 2019
    Member:
    #8429
    Messages:
    54
    Gender:
    Male
    First Name:
    Tommy
    Vehicle:
    2018 4Runner
    Ok I’ll take it
     
  11. Feb 4, 2019 at 11:34 PM
    #11
    4runningMan

    4runningMan New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    2,552
    New Mexico
    For future lurkers- I got one of these knobs on Amazon. I installed it and it was tight but there was a little bit of "play" in it. There is a threaded plastic insert in the knob that is attached by a Philips head screw. If you have any play in your knob, you'll need to insert an extra long Philips screw driver and tighten the threaded insert. Then reinstall and the "play" will be gone.
     
    siblue likes this.
  12. Feb 5, 2019 at 4:19 AM
    #12
    DGP1961

    DGP1961 New Member

    Joined:
    Sep 17, 2018
    Member:
    #7154
    Messages:
    983
    Gender:
    Male
    Vehicle:
    2018 SR5 Premium
    Hmmm thanks I'll need to look at mine when it's lined up there's not enough room for another full turn it'll stop half way to tight. So there's something to adjust this? I'll need to unscrew it and look. Does it like set the depth or something?
     
  13. Feb 5, 2019 at 5:59 AM
    #13
    mikegronholz

    mikegronholz [OP] New Member

    Joined:
    Jan 24, 2019
    Member:
    #8542
    Messages:
    21
    Gender:
    Male
    I’ve heard rumors of double ... but nothing confirmed on a dyno
     
    2016Pro[QUOTED] likes this.
  14. Feb 5, 2019 at 9:39 AM
    #14
    4runningMan

    4runningMan New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    2,552
    New Mexico
    Nope it doesn't set anything. It's a threaded insert. The insert's inner diameter is threaded. It's what allows the knob to be screwed onto the stick.

    If the insert is loose inside the knob, the knob will be wobbly on the stick. The insert can still be screwed on to the stick very tightly, but the knob will be wobbly. Make sense?
     
  15. Feb 5, 2019 at 5:23 PM
    #15
    DGP1961

    DGP1961 New Member

    Joined:
    Sep 17, 2018
    Member:
    #7154
    Messages:
    983
    Gender:
    Male
    Vehicle:
    2018 SR5 Premium
    Think so I'll need to more closely look at it which I haven't yet. When I screw it tight it "stops" (is tight) half a turn BEYOND being lined up. instead of being obviously lined up it would "point" to the passenger so I leave it loose to look correct. Hmmm are they engineered to actually stop and tighten exactly perfect??
     
  16. Feb 5, 2019 at 5:30 PM
    #16
    DGP1961

    DGP1961 New Member

    Joined:
    Sep 17, 2018
    Member:
    #7154
    Messages:
    983
    Gender:
    Male
    Vehicle:
    2018 SR5 Premium
    Ok...So I got curious and just went and looked. There's no insert it's just threaded inside but it isn't as off as I made it sound. At fully "tight" it stops maybe pointing to about 1 o:clock guess I thought it was worse. No biggie won't lose any sleep over it I just keep it backed off to be straight.
     
    4runningMan likes this.
  17. Feb 5, 2019 at 10:23 PM
    #17
    4runningMan

    4runningMan New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    2,552
    New Mexico
    If you shine a light inside, you'll see the white plastic coupler and Philips head screw (I think). But if you screw it all the way tight (1 o'clock in your case) and there's no "play" in it, then there's no need to tighten the screw.
     
  18. Mar 31, 2019 at 5:52 PM
    #18
    Kolisko802

    Kolisko802 New Member

    Joined:
    Mar 12, 2019
    Member:
    #9149
    Messages:
    2
    Gender:
    Male
    Cape Cod, MA
    Vehicle:
    2018 Black 4Runner
    still available?
     
  19. Apr 1, 2019 at 4:57 AM
    #19
    Tstrang

    Tstrang New Member

    Joined:
    Jan 14, 2019
    Member:
    #8429
    Messages:
    54
    Gender:
    Male
    First Name:
    Tommy
    Vehicle:
    2018 4Runner
    Sold... it’s on my bad boy!
     

Products Discussed in

To Top