Remote Start with Takeover is Finally Here - No more engine shut off

Just following up...

I went ahead and ordered the Takeover version to take advantage of the 20% Memorial Day discount they were offering. If it all checks out, I will list of non-takeover version of the Remote Start on this forum.

 

1) Yes, you DO have to hold down the brake for 3 seconds before shifting.

2) You MAY have to cut one wire on the remote start module (NOT on your vehicle) depending on the year of your vehicle and whether the steering wheel locks; it'll be in the instructions. I had to cut mine. There's no other cutting or splicing involved.

3) I didn't lose them in my SR5 Premium, can't speak for anyone else.

Edit: Just realized this question was for Accessorides; this is just my experience.

 

The question was mainly addressed to the vendor but I appreciate anyone chiming in so thank you for your response!

regarding 1), what happens if you don’t hold the brake for long enough before shifting, does it just turn off?

2) this is reassuring. I don’t mind cutting wires on the module, just didn’t want to cut anything on the truck itself.

3) the reviewer mentions that it only happens with MTM, but I’m wonder if he messed up during the install or if he had a bad module?
This one is the dealbreaker with me, if the trajectory lines disappear. Anyone with MTM has had this issue?

 

Do you have MTM on yours by any chance?

 

The lines in my reverse camera are still there after the install. (NOTE: This isn't my pic, but another member on this forum. Mine looks exactly like this even after install. I'm not sure if your Pro has something different)

 

The truck will shut off if you don't hold the brake down long enough. Also, I don't have MTM.

 

Pro and some ORPs have MTM which is essentially a software stitching all 4 cameras to give you a 360° view. That one person stated that the still lines on his truck still appear but the trajectory ones when you turn the steering wheel are gone. It seems strange but unless the vendor or someone with MTM can confirm or deny, I don’t want to have to go through the whole install just to find out I have to remove it if my lines disappear

 

Pretty sure the 3 second thing was on earlier versions. I can certainly say mine does not require a 3 second brake press.

 

There is the option to turn off the trajectory lines while turning. I'm wondering if that got reset while the battery was disconnected during install (mine didn't), or it was accidently turned off.

I am not sure how long the brake actually needs to be pressed, but I just press it while I put my seatbelt on and it has always been long enough.

 

I guess I’ll try it and report back once installed

I contacted the vendor through their website and they confirmed that trajectory lines are not impacted so I placed an order. Looking forward to not having the truck turn off as soon as I open the door. Such a stupid design by Toyota!

“Hello. They likely hit the button on the screen to turn the lines off without realizing it. Our kit does nothing to enable/disable the parking lines so you don't have to worry about that. Thanks!”

 

Will this work with the factory remote start like on the Limiteds and Pro's?

 

From what I understand yes. I will be able to confirm in a few weeks

 

I think the only difference between the 22 and 23 Pro's is the 23 has cross traffic alert. I hope it works on yours

 

22 has cross traffic alert as well. The only difference I can think of is heated steering wheel

 

I know the only thing that was different from 03 to 04 was just a price increase, you can have the heated steering wheel.

 

So I finally have the remote start with takeover from Accesorides installed and working properly.

Install was very easy. Just take your time removing panels.
The printed instructions provided are somewhat useful but very basic and not the best print quality. Following the video from OP helped. Also, if using the OEM fob, there's no need on using the harness that goes to the driver side.

With that said, the first module I received did not work. I contacted customer service (very nice and helpful) and they tried troubleshooting but since it appeared to be defective they sent me a new module. The new module also did not work so I contacted them again and they said they had 1 other customer with the same issue I had but they just had updated the firmware and most likely sent me an older version so they would send me a 3rd one with the updated firmware. Finally this one worked as it should! Really happy with the whole process, shame on Toyota for not having it done this way.

Regarding the trajectory lines with the MTM, I did lose them at first. However this is due to disconnecting the battery (nothing to do with the remote start), and after driving for a few miles they came back as normal.

 

What happens if we have the original Accessorides remote start and want to upgrade? There was some cut wires involved with the original.

 

that might be a question to email Accessorides about. Sounds like semprenissart did not have one previously.

 

Do you have contact/order info that you can share?

 

Correct, I did not have any aftermarket remote start previously (just the one from factory).
From what I heard the original Accesorides remote start cannot be upgraded but like @Steely123 said, it is better to contact Accesorides directly about it to be sure.

https://accessorides.com/products/2...lay-kit-for-push-start?variant=40616729444398

 

What part of Arizona do you live in?

 

Phoenix

 

We're moving my daughter to Tucson in August. She's still trying to talk me into taking my 4runner

 

She's smart! a lot of beautiful trails in AZ...

August is going to be hot. It's already 113F here, today. Remote start definitely helps cooling the cabin. A good sunshade is also vital if you dont want to burn your hands touching the steering wheel.

 

She will be attending U of A to work on her PhD, I told her she won't have time to go off roading and she's not taking my truck.

 

I contacted Accessorides, I thought you could add the takeover to the factory remote start, they told me I have to purchase their remote starter with takeover. I don't want to lose my factory remote start, I use the Toyota app .