1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What do you have still waiting to be installed?

Discussion in '5th Gen 4Runners (2010-2024)' started by 5six, Mar 5, 2023.

  1. Mar 16, 2023 at 3:34 PM
    #61
    Doglover2003

    Doglover2003 New Member

    Joined:
    Sep 12, 2016
    Member:
    #2655
    Messages:
    441
    Gender:
    Male
    First Name:
    Nick
    SoCal
    Vehicle:
    '18 ORP w/KDSS

    Been wrenching for 30+ years, not in a hurry to toss things on right away. As a federal first responder I don't have the luxury when a emergency comes around.
     
    Trail Runnah and Mr Rutherford like this.
  2. Mar 16, 2023 at 3:41 PM
    #62
    nimby

    nimby in the drink

    Joined:
    Mar 27, 2017
    Member:
    #3777
    Messages:
    4,451
    First Name:
    Jake
    California
    Vehicle:
    2018 SR5P
    Perhaps they live in cold areas.

    And/or don't have garages.

    Maybe it's been raining for months.

    Or snowing.

    Or they have children.

    Maybe those children are involved with school and sporting activities that require a lot of after school and/or weekend time.

    Maybe they have activities they like to do that has precedence over wrenching on shit.

    Or maybe all of these at the same time.
     
  3. Mar 16, 2023 at 4:37 PM
    #63
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    2,600
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter *NOW FRAM EXTRA GUARD CA10835 -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Wheel well hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Well aren't you something eh
     
    Doglover2003, glwood54, nimby and 2 others like this.
  4. Mar 16, 2023 at 4:43 PM
    #64
    jasonmcelroy

    jasonmcelroy Recovering perfectionist

    Joined:
    May 17, 2021
    Member:
    #21537
    Messages:
    205
    Gender:
    Male
    First Name:
    Jason
    San Jose, CA
    Vehicle:
    2021 Grey Trail
    Bilsteins, KO2, sound system, RedArc towing
    Two things:

    1) The ECGS bushing replacement kit has been sitting on my bench for a few months waiting for the rain to stop. Originally was supposed to be a pre-emptive move, but am getting the resonance from the front in 2WD indicating it's time.

    2) Have been living with shitty sound for a year even after doing major work to install an amp (AudioControl D-4.800), sound deadening, and a sub. Have concluded that head unit has hopelessly poor signal quality. Went to do some tweaking on the DSP last week and the serial port on the amp is now not working. Frustrating. Would advise others seeking better sound to either deal with the POS that it comes with or dump the HU altogether.

    Jason
     
    5six[OP] likes this.
  5. Mar 16, 2023 at 5:02 PM
    #65
    Silversr5

    Silversr5 New Member

    Joined:
    Jul 16, 2022
    Member:
    #27840
    Messages:
    174
    Gender:
    Male
    @Doglover2003 What do the OEM flip open pocket cover under AC control looks like?
     
    Doglover2003[QUOTED] likes this.
  6. Mar 16, 2023 at 6:07 PM
    #66
    Zal4R

    Zal4R New Member

    Joined:
    Jun 22, 2021
    Member:
    #22043
    Messages:
    116
    Vehicle:
    ‘21 LR TRD Pro
    Eibach TRD Pro Springs RCI Skids
    it’s kids for me. I have to do everything on weekend mornings IF there is not a game or other event we are doing. I only have a short list again. Plano case and shovel mount on my pro rack (it’s about $60 in parts from a hardware store, a Plano rifle case and some Yakima mighty mounts) and my FJ Toyman shock mount sliders. That will do it until I break something else, or figure out I need something for function.
     
    nimby[QUOTED] and Mr Rutherford like this.
  7. Mar 16, 2023 at 7:58 PM
    #67
    5six

    5six [OP] New Member

    Joined:
    Mar 22, 2022
    Member:
    #26248
    Messages:
    555
    Gender:
    Male
    First Name:
    55_4Runner
    GTA, Ontario, Canada
    Vehicle:
    2022 Black TRD ORP
    Ceramic tint (all glass), Toyo AT3s 285/70 C load, Eibach Pro Truck Stage 2 suspension, Ironman UCA, Cartrimhome TRD skid plate, RCI skids (rear diff, transmission, filler plate, catalytic anti theft), SwitchPro 9100 & MT Plate, Caliraised ditch lights & brackets, Caliraised molle panels, Sherpa roof rack, Westcott ladder, Weathertech window visors, Meso & LED interior bulbs, black badging, Weathertech mats, Husky cargo liner, Canvasback rear seat backing, Smittybilt 2781, Morrflate Quad, ARB Diff Breather, Ultimate9, TRD Pro rims, GTR Carbide headlights, DIY Knight Rider light strip.
    Great feedback, thank you.
     
    Nano909[QUOTED] likes this.
  8. Mar 16, 2023 at 8:23 PM
    #68
    5six

    5six [OP] New Member

    Joined:
    Mar 22, 2022
    Member:
    #26248
    Messages:
    555
    Gender:
    Male
    First Name:
    55_4Runner
    GTA, Ontario, Canada
    Vehicle:
    2022 Black TRD ORP
    Ceramic tint (all glass), Toyo AT3s 285/70 C load, Eibach Pro Truck Stage 2 suspension, Ironman UCA, Cartrimhome TRD skid plate, RCI skids (rear diff, transmission, filler plate, catalytic anti theft), SwitchPro 9100 & MT Plate, Caliraised ditch lights & brackets, Caliraised molle panels, Sherpa roof rack, Westcott ladder, Weathertech window visors, Meso & LED interior bulbs, black badging, Weathertech mats, Husky cargo liner, Canvasback rear seat backing, Smittybilt 2781, Morrflate Quad, ARB Diff Breather, Ultimate9, TRD Pro rims, GTR Carbide headlights, DIY Knight Rider light strip.
    I’m convinced by those that “get it done” don’t have a life.
     
    Doglover2003 and Mr Rutherford like this.
  9. Mar 16, 2023 at 10:25 PM
    #69
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    2,600
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter *NOW FRAM EXTRA GUARD CA10835 -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Wheel well hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    @Nano909 if you don't have children, which I hope you do they're the best, then just stop now with this
     
    Mr Rutherford likes this.
  10. Mar 16, 2023 at 11:50 PM
    #70
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    2,600
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -K&N Engine Air Filter *NOW FRAM EXTRA GUARD CA10835 -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Wheel well hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
  11. Mar 17, 2023 at 3:36 AM
    #71
    Spare Parts

    Spare Parts New Member

    Joined:
    May 13, 2020
    Member:
    #14274
    Messages:
    2,313
    Gender:
    Male
    Southern Maine
    Vehicle:
    22 LR ORP
    Sherpa Crestone. 4X Innovations Sliders
    Every ones priorities are different. And honestly, working on my vehicle isn’t my top priority. I have shit from when I had my taco still sitting around, and could careless, today.
     
  12. Mar 17, 2023 at 4:12 AM
    #72
    Trail Runnah

    Trail Runnah New Member

    Joined:
    May 8, 2020
    Member:
    #14189
    Messages:
    2,618
    Gender:
    Male
    Vehicle:
    2013 T4R Trail Edition
    Stock
    I hear that! Working on my vehicles is one of my least favorite things to do. I almost regret buying a lift, because I'm dreading installing it.

    I used to enjoy wrenching when I was a kid, but I'm over it now.
     
  13. Mar 17, 2023 at 7:40 AM
    #73
    Emmantik

    Emmantik New Member

    Joined:
    Dec 11, 2018
    Member:
    #8016
    Messages:
    375
    Gender:
    Male
    Vehicle:
    2015 Magnetic Grey SR5P
    2020+ headunit going into my 2015 SR5 PREM non-JBL. Just waiting for the headunit to arrive and the transplant harness.

    2020+headunit.jpg
     
  14. Mar 17, 2023 at 7:44 AM
    #74
    nimby

    nimby in the drink

    Joined:
    Mar 27, 2017
    Member:
    #3777
    Messages:
    4,451
    First Name:
    Jake
    California
    Vehicle:
    2018 SR5P
    Whoa!

    That's a pretty pricey option, no?
     
  15. Mar 17, 2023 at 9:11 AM
    #75
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    5,536
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeaks
    There's a reason some members end up on the ignore list.
     
  16. Mar 17, 2023 at 9:21 AM
    #76
    Emmantik

    Emmantik New Member

    Joined:
    Dec 11, 2018
    Member:
    #8016
    Messages:
    375
    Gender:
    Male
    Vehicle:
    2015 Magnetic Grey SR5P
    If you buy brand new, yes. I bought a used option. Still pricey I think but would be similar to an aftermarket headunit. I wanted a bigger screen and android auto but also wanted to keep it OEM so I was willing to pay a bit more.
     
    nimby[QUOTED] likes this.
  17. Mar 17, 2023 at 9:49 AM
    #77
    22LimeRush

    22LimeRush New Member

    Joined:
    Dec 27, 2022
    Member:
    #30263
    Messages:
    15
    Gender:
    Male
    First Name:
    Jeff
    Vehicle:
    2022 Toyota 4runner TRD Pro - Lime Rush mostly stock
    Mostly Stock - just a few interior accessories, shelving, sorters, screen protector.
    I am really interested in the new Alpharex Nova G2 for my 22 4runner. Have you installed and was the process any different for a 21+ 4runner? I am hoping that the DRL can be turned on and off within the vehicle on the light controls. I would love to see install pics if you have em. ;)

     
  18. Mar 17, 2023 at 10:11 AM
    #78
    whippersnapper02

    whippersnapper02 New Member

    Joined:
    Feb 27, 2019
    Member:
    #8982
    Messages:
    2,041
    Gender:
    Male
    First Name:
    Christian
    Vehicle:
    2019 4Runner TRD Offroad Premium
    I haven't installed yet but they have you pull power from the INJ fuse in the underhood fusebox for the DTRL. To me this seems like they will be on anytime the ignition is on.
     
    Doglover2003 and Mr Rutherford like this.
  19. Mar 17, 2023 at 10:37 AM
    #79
    Mr Rutherford

    Mr Rutherford New Member

    Joined:
    Jan 18, 2023
    Member:
    #30735
    Messages:
    37
    Gender:
    Male
    Houston, TX
    Vehicle:
    2019 SR5
    Only took me reading 2 of their posts for me to click that good ole ignore button.
     
  20. Mar 17, 2023 at 2:42 PM
    #80
    Doglover2003

    Doglover2003 New Member

    Joined:
    Sep 12, 2016
    Member:
    #2655
    Messages:
    441
    Gender:
    Male
    First Name:
    Nick
    SoCal
    Vehicle:
    '18 ORP w/KDSS
    I'll get a picture when I get home from work :thumbsup:
     
    Mr Rutherford likes this.
  21. Mar 17, 2023 at 8:45 PM
    #81
    5six

    5six [OP] New Member

    Joined:
    Mar 22, 2022
    Member:
    #26248
    Messages:
    555
    Gender:
    Male
    First Name:
    55_4Runner
    GTA, Ontario, Canada
    Vehicle:
    2022 Black TRD ORP
    Ceramic tint (all glass), Toyo AT3s 285/70 C load, Eibach Pro Truck Stage 2 suspension, Ironman UCA, Cartrimhome TRD skid plate, RCI skids (rear diff, transmission, filler plate, catalytic anti theft), SwitchPro 9100 & MT Plate, Caliraised ditch lights & brackets, Caliraised molle panels, Sherpa roof rack, Westcott ladder, Weathertech window visors, Meso & LED interior bulbs, black badging, Weathertech mats, Husky cargo liner, Canvasback rear seat backing, Smittybilt 2781, Morrflate Quad, ARB Diff Breather, Ultimate9, TRD Pro rims, GTR Carbide headlights, DIY Knight Rider light strip.
    I did this when I was younger because I couldn’t afford to get it done. I never touched suspension, but my dad had me do my own brakes, carburetor rebuild, muffler replacement, alternator rebuild kits, brake master cylinder replacement. Cars were easy to work on back then, but hard lessons. Burned my finger prints off on my left hand as I had no idea at 10yrs that mufflers got hot. Now I try and wrench to save money and do it right. Experienced dealerships saying they’ve done work when they haven’t.
     
    Trail Runnah[QUOTED] likes this.
  22. Mar 17, 2023 at 9:34 PM
    #82
    JETSPD1477

    JETSPD1477 New

    Joined:
    Nov 30, 2022
    Member:
    #29859
    Messages:
    361
    SoCal
    Vehicle:
    Typical 4Runner
    i dunno. you’re the one who showed up in here ass hurt about people not installing their stuff.
     
  23. Mar 18, 2023 at 12:43 PM
    #83
    HotelMedicis

    HotelMedicis No Commercial Interests

    Joined:
    Nov 5, 2022
    Member:
    #29434
    Messages:
    389
    My Hella rear fog light.

    IMG_2115-1536x1152.jpg
     
    Dabigono likes this.
  24. Mar 18, 2023 at 3:51 PM
    #84
    Doglover2003

    Doglover2003 New Member

    Joined:
    Sep 12, 2016
    Member:
    #2655
    Messages:
    441
    Gender:
    Male
    First Name:
    Nick
    SoCal
    Vehicle:
    '18 ORP w/KDSS
    @Silversr5 Here's the oem flip open pocket cover. I believe it was on the older 5th gen 4Runner but Toyota deleted it to save cost :notsure:

    Closed:
    20230318_154230.jpg

    Open:
    20230318_154238.jpg
     
    Dabigono likes this.
  25. Mar 18, 2023 at 4:34 PM
    #85
    JETSPD1477

    JETSPD1477 New

    Joined:
    Nov 30, 2022
    Member:
    #29859
    Messages:
    361
    SoCal
    Vehicle:
    Typical 4Runner
    nobody is hiding the simple fact that stuff needs to be installed. its what the topic is in here. sucks your feelings are hurt because you’re back in here defending your whining.
     
  26. Mar 18, 2023 at 5:33 PM
    #86
    Silversr5

    Silversr5 New Member

    Joined:
    Jul 16, 2022
    Member:
    #27840
    Messages:
    174
    Gender:
    Male
    Thanks for the pictures. Do you have the part number for it? I might look into doing this mod now.
     
    Doglover2003[QUOTED] likes this.
  27. Mar 18, 2023 at 7:06 PM
    #87
    Doglover2003

    Doglover2003 New Member

    Joined:
    Sep 12, 2016
    Member:
    #2655
    Messages:
    441
    Gender:
    Male
    First Name:
    Nick
    SoCal
    Vehicle:
    '18 ORP w/KDSS
    I got a few pictures of the part number:

    20230318_154309.jpg

    20230318_154316.jpg
     
  28. Mar 18, 2023 at 7:17 PM
    #88
    Silversr5

    Silversr5 New Member

    Joined:
    Jul 16, 2022
    Member:
    #27840
    Messages:
    174
    Gender:
    Male
    Thank you
     
    Doglover2003[QUOTED] likes this.
  29. Mar 19, 2023 at 8:12 AM
    #89
    JETSPD1477

    JETSPD1477 New

    Joined:
    Nov 30, 2022
    Member:
    #29859
    Messages:
    361
    SoCal
    Vehicle:
    Typical 4Runner
    i’m beginning to realize you’re looking for something with all the questions you keep asking. hoping maybe you got to me or insulted me somehow. so let me help. if accusing me of being unable to wrench helps you feel better i’m all for it man. i will avoid the manhood thing. that’s just weird.
     
  30. Mar 19, 2023 at 8:56 AM
    #90
    whippersnapper02

    whippersnapper02 New Member

    Joined:
    Feb 27, 2019
    Member:
    #8982
    Messages:
    2,041
    Gender:
    Male
    First Name:
    Christian
    Vehicle:
    2019 4Runner TRD Offroad Premium
    Now have some OEM LED fog lamps to install. Hopefully I can figure out how to wrench soon before someone says I can’t.

    [​IMG]
     
    Dabigono, Doglover2003 and nimby like this.

Products Discussed in

To Top