What have you done to your 5th Gen 4Runner today?

Let there be light! I was going to buy the kit, but picked up the parts from "Jeff's" and save a few bucks. Switch operated for now, will install the pin switch if i feel it's necessary.

 

Nice! I unscrewed the rubber bump stop for the hood, drilled a hole in it, and put a pin switch inside of it. So when the hood pops open the light is on.

 

For anyone in the market for one of these
https://www.youtube.com/watch?v=bMXyoIBJyJA&list=WL&index=1

 

SOLVTIN S6 Multifunctional Jump Starter, 1200A Peak Car Starter for up to 7.0L Gas and 5.0L Diesel Engine, 12V Jump Pack with Smart Jumper Cables, Portable Power Supplies with LED Light

https://www.amazon.com/gp/product/B095BZQLG5?ie=UTF8&th=1

ive got this one and really like it. I didn’t want something big as I have already a lot when I go camping so it’s great for me.

it’s on sale currently for $38!

 

From the owner’s manual:
“To make your vehicle more visible to other drivers during daytime driving, the daytime running lights turn on automatically when all of the following conditions are met. (The daytime running lights are not designed for use at night.)
• The engine is running
• The parking brake is released
• The headlight switch is in the , (type A only), (type C
and D), or * (type B and D) position *: When the surroundings are bright”

Did you release the parking brake when checking the DRLs?

 

Yep, got everything to do it, just not the need.

 

Picked up some combined polish/wax to touch up the dull spots where the side emblem adhesive was. After a quick hand buff the swirl marks are gone in that area too. Guess I'm doing the whole car now.

Still haven't found an easy way to clean the wheels though.

 

Brake dust really likes to stick. I use Chemical Guys Diablo Wheel Cleaner, first with a wheel brush and then with pointed, microfiber-covered sponge thing that gets in all the nooks and crannies. Compared to how I treated previous cars, it's fussy overkill, but the rest of the car looks so nice, it feels wrong for the wheels not be just as clean.

 

I'll give it a whirl; never even bought wheel cleaner before this thing but can confirm that Griot's and black-wheel specific stuff (Meguire's?) don't do much. My last car had bronze plastidip wheels that were nearly zero maintenance cause the brake dust kinda matched. I'm not fussy but the blue looks so damn nice and shiny that the dirty wheels (and dirt stuck between the black letters on the rear garnish) stands out terribly.

Has anyone debadged the rear?

 

Backwoods Adventure Bumper, Greenlane Skids and Badland winch on!

 

look at that Beast!

 

Raptor lights. Blackout emblems and LED light swap.

 

What negatives did you hear about the H9 conversion?

The vast majority I hear are positive.......including my own experience.

 

The bulb and wire temperature concerns are not a problem, it’s been hashed out numerous times. Here’s one:
https://www.4runners.com/threads/headlight-comparison-stock-vs-others.11875/page-2#post-178353

 

Proper way to carry to sixth tire. When you go cheap with roofrack, rust all over the place. Should have bought the OEM or Gobi. Don't buy crap guys!

 

Two more mods:

1) The day/night light sensor: (I couldn't fully test it because it's overcast today, but I'm sure it works fine)



2) A color matched key fob. Because why the fuck not? It's gotta match the truck color!

Before:



After:

 

Just put your hand over the sensor

 

Okay, riddle me this, Batman: How can I imitate the sun? I need to test what it does when the lights are turned on, but I'm driving during the daytime. I cannot do that when it's overcast or dark.

 

Flashlight

 

See, THIS is why I ask for help. Because ya'll so dang smart!




My mind is focused on food and the Rangers playoff game right now.

 

You ask, we answer. Might not be the right answer or answer your wanting, but a answer none the less

 

It was the answer I wanted to hear. I seriously mean that. I had a brain fart and couldn't figure it out.

Edit: I tested it and it works perfectly.

 

Thanks for the part#.

After you added the sensor did it affect what position you keep the Dimmer switch on the left side of the dash at?

I had this mod on my ‘19 ORP but I can’t remember if it affected the Dimmer Switch Setting. Thanks.

 

Was a vast improvement over the OEM. That was 1 of the 1st mods I did going from 2015 Tacoma I couldn't believe how dim they were in comparison.

 

After I added it, I didn't have to adjust the dimmer switch

 

Thanks.

 

Spent a couple hours with my Runner on the jack and ramps while I crawled around underneath spraying Woolwax in-and on about everything. I'll be ordering more for extra sprays down the road, but I'm glad to get this process started. I need to make this beast last and this will surely help.

 

you’re smart, you’ll figure it out

 

No I'm not! I had to have @hvac guy fix it for me.

 

Even if he didn't, it can't stay dark forever. I'm staying tuned for your review.